Our website is currently undergoing maintenance. Article records and full texts remain available. Submissions can be made through the Editorial Manager.

Large-Scale Synthesis of α-Si₃N₄ Nanofibers and Nanobelts from Mesoporous Silica-Carbon Nanocomposites

K. Wang, H. Wang, Y.-B. Cheng

Journal of Ceramic Science and Technology, Vol. 8, No. 2 (2017), pp. 259-264

DOI: 10.4416/JCST2016-00118

Download full article (PDF)

Abstract

This work presents a low-cost and large-scale synthesis technique for silicon nitride nanofibers and nanobelts based on the use of mesoporous silica-carbon nanocomposites as precursors via a carbothermal reduction and nitridation reaction. The growth mechanisms have been investigated by carrying out heat-treatment of precursors with different C/SiO2 ratios in a flowing nitrogen gas with different flow rates. Highly crystalline silicon nitride nanofibers and nanobelts were obtained after easy separation from the unreacted powder underneath. A higher C/SiO2 ratio gives a better yield of nitride products. The thickness of the ribbons can be maintained as constant while the width of the ribbons can be controlled by tailoring the flow rate of nitrogen gas. The growth direction of Si3N4 nanobelts is parallel to the [100] crystallographic orientation of α-Si3N4.

Keywords

Silicon nitride, nanofibers, nanobelts, mesoporous, nanocomposites, carbothermal reduction and nitridation

View this issue · Article & DOI index