Our website is currently undergoing maintenance. Article records and full texts remain available. Submissions can be made through the Editorial Manager.

CO₂-Laser-Assisted Surface Modification of Titanium Alloys for Biomedical Applications

S. Gräf, F. A. Müller

Journal of Ceramic Science and Technology, Vol. 5, No. 4 (2014), pp. 281-286

DOI: 10.4416/JCST2014-00022

Download full article (PDF)

Abstract

The surface of Ti6Al4V alloys was activated by means of selective laser microstructuring and subsequent sintering of hydroxyapatite (HAp) nanopowders into the generated structures. For structuring, a novel Q-switched CO2 laser with pulse durations of about 400 ns and a peak power of up to 7 kW was used. This laser system provides defined blind-holes with structural sizes in the range of 100 – 500 μm. The influence of different process gases (Ar, O2, N2) on the formation of titanium oxide (TiO2) and titanium nitride (TiN) interfaces during laser structuring was investigated with glow discharge optical emission spectroscopy (GDOES). HAp nanopowders prepared via a wet-chemical synthesis route were subsequently sintered into the generated structures using a CO2 laser with continuous radiation intensities up to 240 W/cm2. The homogeneously sintered structures consist of HAp as the major phase and minor amounts of tricalcium phosphate (TCP) and tetracalcium phosphate (TTCP). The formation of TCP and TTCP during laser sintering can be minimized by adjusting sintering parameters (time, laser intensity) and by applying additional process gases (O2, Ar).

Keywords

CO2-laser surface structuring, titanium alloy, bioactivation, laser sintering, hydroxyapatite

View this issue · Article & DOI index