Issues
Journal of Ceramic Science and Technology 1/2026
Vol. 17, No. 1
Original Articles
Source: 
| The Effect of BN Content on the Thermal Expansion Properties of SiC Composite Ceramics Weijing Kong, Bin Hu Vol. 17, No. 1, Pages 33-38 DOI: 10.4416/JCST2024-00035 Keywords: Silicon carbide composite ceramics, coefficient of thermal expansion, dielectric constant, dielectric loss |
Source:
| Effects of B2O3-V2O5 on Sinterability and Microwave Dielectric Properties of (Mg1-xCux)2SiO4 Ceramics Chengxi Hu, Xiechao Hu, Ze Qing Guo, Amanda Ekeminiabasi Williams Vol. 17, No. 1, Pages 101-106 DOI: 10.4416/JCST2025-00018 Keywords: Microwave dielectric properties, B2O3-V2O5 co-doped, (Mg0.95Cu0.05)2SiO4, microwave ceramics |
Source:
| Influence of the Surface Modification of Lithium Disilicate Ceramics with Er, Cr: YSGG, and Nd:YAG Laser on Surface Properties, Roughness, and Bond Strength Bonded to Light- and Dual-Cure Cements K.A. Al Aali Vol. 17, No. 1, Pages 63-70 DOI: 10.4416/JCST2025-00017 Keywords: Lithium disilicate ceramics, shear bond strength, Er, Cr: YSGG laser, hydrofluoric acid, scanning electron microscopy. |
Source:
| Effect of SrO Precursors on the Microstructure and Mechanical Properties of Zirconia-Toughened Alumina (ZTA) Composites Jing Zhou, Shuhao Jiang, Jinping Yang, Teng Ma, Jian Zhang Vol. 17, No. 1, Pages 53-62 DOI: 10.4416/JCST2025-00009 Keywords: Ceramic composites, strontium hexaluminate, platelet, in-situ formation, mechanical properties |
Source:
| Electrochemical Deposition of Ni-Zn Oxide Coatings on Roll Knife Surfaces: Process Parameters and Performance Effects Quangang Li, Jianbo Zhou, Xiaohong Wang Vol. 17, No. 1, Pages 71-82 DOI: 10.4416/JCST2025-00020 Keywords: Microstructural refinement, corrosion resistance, mechanical integrity, wear resistance, tribological properties. |
Source:
| Aqueous-Oxygen Corrosion Damage of 2.5D Braided SiCf/SiC Composites Prepared by CVI+PIP Processing: Multidimensional Observation and Mechanism Analysis Zhang Lin, Li Junsheng, Chen Sian, Zhang Yanhu, Wan Fan Vol. 17, No. 1, Pages 39-52 DOI: 10.4416/JCST2025-00006 Keywords: X-ray computed tomography (XCT), SiCf/SiC composites, high-temperature aqueous-oxygen, oxidation mechanism. |
Source:
| Effect of As-Cast Al2O3 Nanoparticles on Dynamic Recrystallization Behavior and Mechanical Properties of Mg-Gd-Y Alloy Yan-Qiong Ma, Shuang Han, He Ma, Jian-She Lian Vol. 17, No. 1, Pages 83-92 DOI: 10.4416/JCST2025-00022 Keywords: Grain refinement, Orowan strengthening, texture evolution, particle-matrix interface, process map. |
Source:
| Influence of Er: YAG Laser, and Radachlorin-Activated Low-Level Laser Therapy on the Contact Angle, Surface Topography, and Shear Bond Strength of Lithium Disilicate Ceramics and Resin-Based Ceramics A. Barakat, S. AbdulRahman AlTowayan, N.H. Shaheen, A.M. Elmarakby, K.A. Rayes, M. Mahmood Vol. 17, No. 1, Pages 93-100 DOI: 10.4416/JCST2025-00024 Keywords: Hydrofluoric acid, low-level laser, Radachlorin, bond strength, laser. |
Source:
| Porous Ceramic Microspheres for Enhancing Acoustic Absorption of Polyurethane Foams in Automotive NVH Control Qiong Yuan, Shisheng Li Vol. 17, No. 1, Pages 1-16 DOI: 10.4416/JCST2025-00026 Keywords: Flow resistivity, tortuosity, cell morphology, local resonance, impedance tube |
Source:
| Machine-Learning-Assisted Micro-CT and Multimodal Imaging for Osseointegration Assessment of Zirconia Ceramic Implants: Linking Processing, Microstructure, and In-Vivo Performance Ya Qiu, Yang Liu, Ke Zheng Vol. 17, No. 1, Pages 17-32 DOI: 10.4416/JCST2025-00027 Keywords: Transformation toughening, low-temperature degradation, osseointegration assessment, deep learning, digital twin |
