Issues
Journal of Ceramic Science and Technology 3/2018
Vol. 9, No. 3
Original Articles
Structure Features and Properties of Graphene/Al2O3 Composite E. A. Klyatskina, A. Borrell, E. G. Grigoriev, A. G. Zholnin, M. D. Salvador, V. V. Stolyarov Vol. 9, No. 3, Pages 215-224 DOI: 10.4416/JCST2018-00006 Keywords: Graphene, nanocomposite, wear behavior, mechanical properties, SPS |
Surface Modification of Alumina Powder to Prevent Exfoliation of Samples Fabricated by Gelcasting A. Wieclaw-Midor, P. Wiecinska, M. Szafran Vol. 9, No. 3, Pages 225-234 DOI: 10.4416/JCST2018-00008 Keywords: Gelcasting, surface modification, alumina, mechanical strength |
Monitoring Damage Accumulation in Continuous Fiber-Reinforced Ceramic-Matrix Composites with Different Fiber Preforms under Cyclic Loading Using Hysteresis-Based Damage Parameters Li Longbiao Vol. 9, No. 3, Pages 235-262 DOI: 10.4416/JCST2018-00010 Keywords: Ceramic-matrix composites (CMCs), damage accumulation, matrix cracking, interface debonding, hysteresis loops. |
Microstructure, Growth Kinetics and Formation Mechanism of Oxide Layers on AlN Ceramic Substrates Ye Cao, Haixian Xu, Jun Zhan, Hao Zhang, Song Cui, Wenming Tang Vol. 9, No. 3, Pages 263-270 DOI: 10.4416/JCST2018-00011 Keywords: AlN ceramic substrate, oxidation, microstructure, kinetics, formation mechanism |
Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites M. Stumpf, J. Biggemann, T. Fey, K. Kakimoto, P. Greil Vol. 9, No. 3, Pages 271-278 DOI: 10.4416/JCST2018-00013 Keywords: Nb2AlC, ZrO2, particle composite, toughness |
Influence of Heat Treatment of Amorphous Ti- and B-Containing SiC-Based Fiber in Air on Microstructure and Strength Jiangxi Chen, Baojie Zhang, Danni Xu, Zhaoju Yu, Guomei He Vol. 9, No. 3, Pages 279-288 DOI: 10.4416/JCST2018-00014 Keywords: SiC fiber, oxidation, strength, microstructure, amorphous |
Influence of Reaction-Sintering and Calcination Conditions on Thermoelectric Properties of Sm-doped Calcium Manganate CaMnO3 S. Bresch, B. Mieller, F. Delorme, C. Chen, M. Bektas, R. Moos, T. Rabe Vol. 9, No. 3, Pages 289-300 DOI: 10.4416/JCST2018-00017 Keywords: Thermoelectric oxides, calcination, solid-state-synthesis, power factor, reaction-sintering |
The Corrosion of Mg-Partially Stabilized Zirconia During Service in Continuous Casting Tundish K. Wiśniewska, D. Madej, J. Szczerba Vol. 9, No. 3, Pages 301-308 DOI: 10.4416/JCST2018-00019 Keywords: Mg-stabilized zirconia, corrosion, steel casting, refractories |
Hot Corrosion Behavior of ZrB2-SiC-Graphite Composite in NaCl and Na2SO4 Molten Salts X. Liu, G. Wang, L. Liu, Z. Wang, Z. Wu, M. Liu Vol. 9, No. 3, Pages 309-318 DOI: 10.4416/JCST2018-00020 Keywords: ZrB2-based composites, molten salts, hot corrosion, sulfidation |
Interlaminar Shear Response of Carbon/Carbon in Torsion Tests T. Krause, R.S.M. Almeida, E. Volkmann, K. Tushtev, D. Koch, K. Rezwan, G. Grathwohl Vol. 9, No. 3, Pages 319-326 DOI: 10.4416/JCST2018-00021 Keywords: Carbon fibers, ceramic matrix composites (CMCs), delamination, shear strength. |
Slurry Development for Spray Granulation of Ceramic Multicomponent Batches P. Höhne, B, Mieller, T. Rabe Vol. 9, No. 3, Pages 327-336 DOI: 10.4416/JCST2018-00022 Keywords: Slurry optimization, optical centrifugation, destabilization, spray drying, biaxial strength |
Impact of Ba2+on Structure and Electrical Properties of 0.65PMN-0.35PT Ceramics C. Lu, Y. Liu, C. Lyu, F. Chen, H. Xi, Y. Lyu Vol. 9, No. 3, Pages 337-344 DOI: 10.4416/JCST2018-00023 Keywords: PMN-PT, strain, piezoelectric properties, morphotropic phase boundary, phase transition |
Co-Precipitation Synthesis of La2O2SO4:Tb3+ Phosphor and its Conversion to La2O2S:Tb3+ Ceramic Scintillator via Pressureless Sintering in Hydrogen G.X. Xu, J.B. Lian, N.C. Wu, X. Zhang, J. He Vol. 9, No. 3, Pages 345-352 DOI: 10.4416/JCST2018-00018 Keywords: Lanthanum compounds, co-precipitation, pressureless sintering, photoluminescence, ceramic scintillator |