Issues
Journal of Ceramic Science and Technology 4/2017
Vol. 8, No. 4
Review Article
An Overview of the Functional Ceramic and Composite Materials for Microbiological Fuel Cells A.S. Galushko, A.G. Ivanova, M.S. Masalovich, O.A. Zagrebelnyy, G.G. Panova, I.Yu. Kruchinina, O.A. Shilova Vol. 8, No. 4, Pages 433-454 DOI: 10.4416/JCST2017-00041 Keywords: Microbiological fuel cells, bioelectrogenesis, ceramic and composite anode materials, ceramic and composite cathode materials, ceramic and composite separating membrane |
Original Articles
Effect of Alumina-Coated Graphite (ACG) on the Microstructure and Mechanical Properties of Al2O3-C Refractories X. Xu, Y. Li, Q. Wang, S. Sang, L. Pan Vol. 8, No. 4, Pages 455-462 DOI: 10.4416/JCST2016-00079 Keywords: Alumina-coated graphite, expanded graphite, microstructure, mechanical properties |
Dielectric Properties of Gel-Calcined Cd-Zn Oxide Nanocomposites A. De, S. Kundu Vol. 8, No. 4, Pages 463-470 DOI: 10.4416/JCST2017-00008 Keywords: Sol-gel, nanocomposite, dielectric properties |
Evaluation of Rheological and Thermal Behavior of Ceramic Materials during Liquid Phase Sintering with Numerical-Experimental Procedure E. Salahi, H. Yaghoubi, F. Taati Vol. 8, No. 4, Pages 471-484 DOI: 10.4416/JCST2017-00019 Keywords: Rheological behavior, hard porcelain, liquid phase sintering, numerical-experimental analysis |
The Role of Pore-Formers on Grain Interior and Grain Boundary Conductivity in Tape-Cast Porous Sheets for Electrochemical Flue Gas Purification C. Grings Schmidt, K.B. Andersen, E. Stamate, A. Kaiser, K. Kammer Hansen Vol. 8, No. 4, Pages 485-492 DOI: 10.4416/JCST2017-00024 Keywords: CGO, tape casting, EIS, conductivity |
The Interaction of Stacking Faults and the Doping of Si in TiC Q. Liu, F.G. Qi, X.L. Wang, H.M. Ding, Y. Shi Vol. 8, No. 4, Pages 493-498 DOI: 10.4416/JCST2017-00027 Keywords: Defects, ceramic, vacancies, simulation. |
Effects of Sintering Time on Microstructure and Properties of Alumina Foam Ceramics Z. Chu, C. Jia, J. Liu, R. Ding, G. Yuan Vol. 8, No. 4, Pages 499-504 DOI: 10.4416/JCST2017-00028 Keywords: Foam ceramics, alumina fibers, microstructure, compressive strength |
Tricalcium Phosphate Nanostructures Loaded with Bisphosphonate as Potential Anticancer Agents M. Rahmanian, S.M. Naghib, A. Seyfoori, A.A. Zare, K. Majidzadeh-A, L. Farahmand Vol. 8, No. 4, Pages 505-512 DOI: 10.4416/JCST2017-00029 Keywords: MCF-7, G-292, tricalcium phosphate, nanomedicine, inhibitory effect |
In-Situ Synthesis and Formation Mechanism of Al2O3-Spinel(N) Composite in Nitrogen Atmosphere under Low Oxygen Partial Pressure S. Tong, Y. Li, J. Zhao, M. Yan, Y. Hong, Q. Zheng Vol. 8, No. 4, Pages 513-518 DOI: 10.4416/JCST2017-00030 Keywords: Magnesia aggregates, low oxygen partial pressure, Mg(g), spinel |
Effect of Nb Doping on Crystalline Orientation, Electric and Fatigue Properties of PZT Thin Films Prepared by Sol-Gel Process Q. Li, X. Wang, F. Wang, J. Dou, W. Xu, H. Zou Vol. 8, No. 4, Pages 519-524 DOI: 10.4416/JCST2017-00031 Keywords: PNZT thin films, (100) preferred orientation, microstructure, fatigue resistance, sol-gel process |
Mechanical Properties of Zirconia Y-TZP Core Veneered for Dentistry Applications C.N. Elias, H.E.S. dos Santos, M. Garbossa, C. dos Santos Vol. 8, No. 4, Pages 525-530 DOI: 10.4416/JCST2017-00032 Keywords: Y-TZP, zirconia nano-particles, dental prosthesis, zirconia core veneered |
Laser-Induced Slip Casting (LIS) – a New Additive Manufacturing Process for Dense Ceramics Demonstrated with Si3N4 J. Lüchtenborg, T. Mühler, F. Léonard, J. Günster Vol. 8, No. 4, Pages 531-540 DOI: 10.4416/JCST2017-00091 Keywords: Silicon nitride, additive manufacturing, slurry based |
Short Communication
Mechanical and Biological Properties of Biphasic Calcium Phosphate Scaffold depending on Different Nanoparticle Fabrication Methods M.-H. Hong, S.-M. Kim, Y.-K. Lee Vol. 8, No. 4, Pages 541-546 DOI: 10.4416/JCST2017-00033 Keywords: Calcium phosphates, scaffolds, mechanical property, biological property |