Issues

The Influence of Order in the Cation Sublattice of MgAl₂O₄, MgCr₂O₄ and MgFe₂O₄ Spinels on the Kinetics of Topochemical Reactions with Sulphur Oxides

A. Gerle, J. Piotrowski, J. Podwórny

Vol. 8, No. 2, Pages 183-192   DOI: 10.4416/JCST2016-00077

Keywords: Order-disorder transformation, spinel, corrosion, refractories, sulphur oxides

Abstract  |  References  |  Full Article

Sintering Behaviour of Mg(Al_xFe_1-x)₂O₄ Materials and their Corrosion in Na₃AlF₆-AlF₃-K₃AlF₆ Electrolyte

Y.B. Xu, Y.W. Li, J.H. Yang, S.B. Sang, Q.W. Qin

Vol. 8, No. 2, Pages 193-200   DOI: 10.4416/JCST2016-00081

Keywords: Sidewalls, Mg(Al_xFe_1-x)₂O₄, dense layer, electrolyte, corrosion resistance

Abstract  |  References  |  Full Article

Hydrogen insertion in Ti₂AlC and its influence on the crystal structure and bonds

Q. Liu, H. M. Ding, B. Q. Du, K. Y. Chu, Y. Shi

Vol. 8, No. 2, Pages 201-208   DOI: 10.4416/JCST2016-00082

Keywords: MAX phases, Ti₂AlC, first-principles calculations.

Abstract  |  References  |  Full Article

Sintering and Characterization of a Transparent Ferroelectric NaNbO₃ Ceramic

X. Lin, Z.-F. Li, L.-F. Shu

Vol. 8, No. 2, Pages 209-212   DOI: 10.4416/JCST2016-00085

Keywords: Transparent ceramics, NaNbO₃, transmission, ferroelectric properties

Abstract  |  References  |  Full Article

Manufacture and Tribological Behavior of C/C-SiC Brake Composites Modified with Fe-Si Alloy

Y-H. Lu, Z. Li, W. Zhou, P. Xiao

Vol. 8, No. 2, Pages 213-222   DOI: 10.4416/JCST2016-00086

Keywords: C/C-SiC, friction, wear

Abstract  |  References  |  Full Article

Mixed-Mode Fracture Criterion of Short Carbon Fiber-Dispersed SiC Matrix Composite

R. Inoue, J.-M. Yang, H. Kakisawa, Y. Kagawa

Vol. 8, No. 2, Pages 223-232   DOI: 10.4416/JCST2016-00108

Keywords: Composite, carbon fiber, SiC, toughness, mixed mode

Abstract  |  References  |  Full Article

Mechanical Properties, Strengthening and Toughening Mechanisms of Reactive-Hot-Pressed TiB₂-SiC-Ni Ceramic Composites

G. Zhao, C. Huang, N. He, H. Liu

Vol. 8, No. 2, Pages 233-242   DOI: 10.4416/JCST2016-00110

Keywords: TiB₂-SiC-Ni composite, mechanical properties, microstructure, reactive hot pressing, strengthening and toughening mechanism.

Abstract  |  References  |  Full Article

High Permittivity and Dielectric Response of CaCu₃Ti_3.9(Y_0.5Nb_0.5)_0.1O₁₂ Ceramics

Y. Liu, X. Huang

Vol. 8, No. 2, Pages 243-248   DOI: 10.4416/JCST2016-00112

Keywords: Dielectric properties, impedance, co-doping, grain boundary, interfacial polarization

Abstract  |  References  |  Full Article

Response Surface Methodology for Optimization of the Synthesis of Lithium Ion Conductor Glass-Ceramic Electrolyte

H. Kun, Z. Chengkui, L. Baoying, W. Yanhang, H. Bin, C. Jiang

Vol. 8, No. 2, Pages 249-254   DOI: 10.4416/JCST2016-00113

Keywords: Glass-ceramic, crystallization parameters, response surface methodology, optimization

Abstract  |  References  |  Full Article

Particle Size Effect on the Electrical Properties of Spark-Plasma-Sintered Relaxor Potassium Sodium Niobate Ceramic

C. Wang, J. Chen, L. Shen, J. Rui, X. Yang, M. Zhu, Y. Hou

Vol. 8, No. 2, Pages 255-258   DOI: 10.4416/JCST2016-00116

Keywords: Lead-free piezoelectric ceramics, potassium sodium niobate, submicron-grained, dielectric relaxation, electrical properties.

Abstract  |  References  |  Full Article

Large-Scale Synthesis of α-Si₃N₄ Nanofibers and Nanobelts from Mesoporous Silica-Carbon Nanocomposites

K. Wang, H. Wang, Y.-B. Cheng

Vol. 8, No. 2, Pages 259-264   DOI: 10.4416/JCST2016-00118

Keywords: Silicon nitride, nanofibers, nanobelts, mesoporous, nanocomposites, carbothermal reduction and nitridation

Abstract  |  References  |  Full Article

Interface Design and Processing of Bioactive Microporous Calcium Phosphate Coatings on Load-Bearing Zirconia Substrate

R. Sultana, J. Yang, Z. Sun, X. Hu

Vol. 8, No. 2, Pages 265-276   DOI: 10.4416/JCST2017-00005

Keywords: Interface design, interlocked interface processing, calcium phosphate/zirconia composite, mechanical strength, microstructure

Abstract  |  References  |  Full Article

Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts

S. Greiner, K. Kurth, C. Fix, T. Braun, J. Franke, D. Drummer

Vol. 8, No. 2, Pages 277-286   DOI: 10.4416/JCST2017-00009

Keywords: Ceramic injection molding, surface roughness, ceramic feedstock, Al₂O₃ ceramics

Abstract  |  References  |  Full Article

Relationship of Preparation Parameters and Chromatic Properties of Zircon-Encapsulated Carbon Black Ceramic Pigment Prepared with a Sol-Gel-Spraying Method

Q. Wang, Q. Chang, K. Yang, Y. Wang, X. Wang, X. Li, J.-E. Zhou

Vol. 8, No. 2, Pages 287-294   DOI: 10.4416/JCST2017-00013

Keywords: Ceramic pigment, zircon, encapsulated pigment, sol-gel-spraying

Abstract  |  References  |  Full Article

A Kinetic Study of Limestone Dry Micronization in an Ultra-Centrifugal Mill with Peripheral Comminuting Path

D. Radulović, D. Božović, A. Terzić, M. S. Trumić, V. Simić, L. Andrić

Vol. 8, No. 2, Pages 295-304   DOI: 10.4416/JCST2017-00022

Keywords: Limestone, fillers for ceramics, mechano-chemical activation, grinding, optimization.

Abstract  |  References  |  Full Article

Corrigendum to “Relationship of Optical Properties and Elastoplastic Characteristics of Transparent Spark-Plasma-Sintered YSZ Ceramics” [J. Ceram. Sci. Technol. 08 [01] 161-168 (2017)]

O. L. Khasanov, E. S. Dvilis, Z. G. Bikbaeva, V. D. Paygin, A. O. Khasanov

Vol. 8, No. 2, Pages 305-306   DOI: 10.4416/JCST2016-00105-CORR

Keywords:

Abstract  |  References  |  Full Article