Search

Journal of Ceramic Science and Technology

The Journal of Ceramic Science and Technology publishes original scientific articles on all topics of ceramic science and technology from all ceramic branches. The focus is on the scientific exploration of the relationships between processing, microstructure and properties of sintered ceramic materials as well as on new processing routes for innovative ceramic materials. The papers may have either theoretical or experimental background. A high quality of publications will be guaranteed by a thorough double blind peer review process.

The Journal is published by Göller Verlag GmbH on behalf of the Deutsche Keramische Gesellschaft (DKG). Edited by J.G. Heinrich Clausthal University of Technology, Germany

Journal Metrics

Web of science
Impact Factor: 1,220
Impact Factor without Journal Self Cites: 1,060
5 Year Impact Factor: 0,818

Scopus
Scimago Journal Rank (SJR): 0,378

Prices

Authors
1,300 € Open Access

Print Subscription
62 € per year

view all subscriptions

Payment methods

Credit card

Invoice

Wire transfer

Issues

Journal of Ceramic Science and Technology 4/2016

Vol. 7, No. 4

Original Articles

Source:

Journal of Ceramic Science and Technology

Low-Temperature Degradation Behaviour and Mechanical Properties of a 3Y-TZP Manufactured from Detonation-Synthesized Powder

F. Kern, V. Lindner, R. Gadow

Vol. 7, No. 4, Pages 313-322 DOI: 10.4416/JCST2016-00036

Keywords: Zirconia, mechanical properties, phase composition, microstructure, low-temperature degradation

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Anisotropic Fracture Toughness and Microstructure of Graphene-Reinforced TiC/Si₃N₄Composite

Y. Zhang, G. Xiao, C. Xu, M. Yi, X. Meng

Vol. 7, No. 4, Pages 323-328 DOI: 10.4416/JCST2016-00032

Keywords: Graphene, orientation, fracture toughness, microstructure

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Structural, Electrical and Magnetic Properties of BiFe_1-xY_xO₃ (0 ≤ x ≤ 0.6) Ceramics

A.A.A. Najm, A.H. Shaari, H. Baqiah, E. Bin Saion, L.K. Pah, C.S. Kien, M.M.A. Kechik

Vol. 7, No. 4, Pages 329-334 DOI: 10.4416/JCST2016-00028

Keywords: Bismuth ferrite ceramic, x-ray diffraction, solid-state reaction, magnetic properties, dielectric properties

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Microstructure and Mechanical Properties of Ternary Ceramic Composites with a ZrC-SiC Matrix

B.X. Ma, S.H. Xu

Vol. 7, No. 4, Pages 335-340 DOI: 10.4416/JCST2016-00039

Keywords: ZrC-SiC, ZrSi₂, microstructure, mechanical properties

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Effects of Micro-Damage on the Nonlinear Constitutive Behavior of SiC/SiC Minicomposites

S. Zhang, X. Gao, J. Chen, H. Dong, Y. Song, H. Zhang

Vol. 7, No. 4, Pages 341-348 DOI: 10.4416/JCST2016-00040

Keywords: Ceramic matrix composites, nonlinearity, micro-damage, matrix cracks, in-situ mechanical testing

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Synthesis of Calcium Hexaboride Powder via Boro/Carbothermal Reduction with a Gel Precursor

D. Yilmaz Çakta, N. Koç, S. Turan

Vol. 7, No. 4, Pages 349-356 DOI: 10.4416/JCST2016-00044

Keywords: Hexaboride, boro/carbothermal reduction, gel precursor, boric acid, mannitol

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Microstructure and Electrical Properties of Co-Doped ZnO Varistors

S. Hamdelou, K. Guergouri

Vol. 7, No. 4, Pages 357-364 DOI: 10.4416/JCST2016-00045

Keywords: Co-doped ZnO varistors, microwave sintering, microstructure, electrical properties

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Higher Electronics Circuit Integrations within the Fractal Electronics Frontiers

V.V. Mitic, V. Paunovic, Lj. Kocic

Vol. 7, No. 4, Pages 365-378 DOI: 10.4416/JCST2016-00047

Keywords: Ceramics, Coble's model, Heywang model, Curie-Weiss law

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Ablation-Resistant Composite Coating of HfC-TaC-SiC for C/C Composites Deposited by Supersonic Atmospheric Plasma Spraying

Y. Yang, K. Li, G. Liu, Z. Zhao

Vol. 7, No. 4, Pages 379-386 DOI: 10.4416/JCST2016-00050

Keywords: Carbon/carbon composites, supersonic atmospheric plasma spraying, multiphase coating, ablation resistance

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Experimental Investigation of the In-Plane Shear Behavior on Needled C/SiC Composites using Digital Image Correlation

G. Yu, X. Gao, Y. Song

Vol. 7, No. 4, Pages 387-396 DOI: 10.4416/JCST2016-00052

Keywords: Shear behavior, C/SiC composites, digital image correlation, strain field, failure mechanism

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Influence of Phosphoric Acid Treatment on the Photocatalytic Activity of Zinc Oxide

H. Onoda, Y. Sato

Vol. 7, No. 4, Pages 397-402 DOI: 10.4416/JCST2016-00053

Keywords: Zinc oxide, phosphoric acid treatment, photocatalytic activity, particle size

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Low-Temperature Preparation of Lanthanum Hexaboride Fine Powder via Magnesiothermic Reduction in Molten Salt

K. Bao, C. Liu, B. Yazdani Damavandi, S. Zhang

Vol. 7, No. 4, Pages 403-408 DOI: 10.4416/JCST2016-00057

Keywords: Lanthanum hexaboride, molten salt synthesis, cathode material.

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Factors Affecting the Performance of Thermal Barrier Coatings in the Presence of V₂O₅ and Na₂SO₄

K.P. Jonnalagadda, R. Eriksson, R.L. Peng, X.-H. Li, S. Johansson

Vol. 7, No. 4, Pages 409-416 DOI: 10.4416/JCST2016-00058

Keywords: HOSP, agglomerated and sintered YSZ, hot corrosion, TBC

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by SPS

H.Z. Li, Z.J. Li, X.D. Luo, J.Y. Gui, Z.P. Xie

Vol. 7, No. 4, Pages 417-422 DOI: 10.4416/JCST2016-00059

Keywords: Zirconia-mullite, co-precipitation, flexural strength, Vickers hardness, microstructure

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Silicon Nitride Ceramics with High Thermal Conductivity and Excellent Mechanical Properties Fabricated with MgF₂ Sintering Aid and Post-Sintering Heat Treatment

F. Hu, L. Zhao, Z.P. Xie

Vol. 7, No. 4, Pages 423-428 DOI: 10.4416/JCST2016-00065

Keywords: MgF₂ sintering aids, silicon nitride, thermal conductivity, mechanical properties

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Fabrication of Tin-Doped Indium Oxide Thin Films Using Aerosol Deposition

Y. Hasegawa, Y. Sato, S. Yoshikado

Vol. 7, No. 4, Pages 429-432 DOI: 10.4416/JCST2016-00067

Keywords: Tin-doped indium oxide, thin film, aerosol deposition, room-temperature impact consolidation, resistivity

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Phase Relations in the SiC-Al₂O₃-Pr₂O₃System

W. Pan, L. Wu, Y. Jiang, Z. Huang

Vol. 7, No. 4, Pages 433-440 DOI: 10.4416/JCST2016-00073

Keywords: Pr₂O₃, SiC, phase equilibrium, solid-state reacted

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

The Effect of Nano CuO as Sintering Aid on Phase Formation, Microstructure and Properties of Li₂O-Stabilized β″-Alumina Ceramics

H. Ahmadi Moghadam, M. Hossein Paydar

Vol. 7, No. 4, Pages 441-446 DOI: 10.4416/JCST2016-00075

Keywords: Keywords: β″-alumina ceramics, nano CuO, microstructure, mechanical properties, ionic conductivity

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Influence of MgAl₂O₄ Spinel Addition on Properties of Alumina-Chrome Refractory Prepared with Alumina-Chrome Slag

J. Wu, J. Liu, R. Li, Q. Zhen

Vol. 7, No. 4, Pages 447-454 DOI: 10.4416/JCST2016-00076

Keywords: Alumina-chrome refractory, alumina-chrome slag, MgAl₂O₄ spinel, slag corrosion, crude copper corrosion

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Spray Freeze Granulation of Submicrometre α-Alumina Using Ultrasonication

S. Ghanizadeh, P. Ramanujam, B. Vaidhyanathan, J. Binner

Vol. 7, No. 4, Pages 455-462 DOI: 10.4416/JCST2016-00078

Keywords: Keywords: Alumina, granulation, spray-freeze drying, two-stage sintering

Abstract | References | Full Article

Short Communications

Source:

Journal of Ceramic Science and Technology

Annealing Temperature Effects on Structural and Hydrophilic Properties of Magnesium-Doped TiO₂ Thin Films

M. Kumar, A. K. Gupta, D. Kumar

Vol. 7, No. 4, Pages 463-468 DOI: 10.4416/JCST2016-00041

Keywords: TiO₂ thin films, Mg-doping, annealing, surface modification, hydrophilicity.

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Crystallization Behavior, Microstructure and Magnetic Properties of B₂O₃-SiO₂-Fe₂O₃-BaO-SrO Glass-Ceramics

M. Tavoosi, A. Ghasemi, D. Yousefi

Vol. 7, No. 4, Pages 469-476 DOI: 10.4416/JCST2016-00063

Keywords: Glass-ceramics, crystallization, magnetic materials, hexaferrite.

Abstract | References | Full Article

Source:

Journal of Ceramic Science and Technology

Synthesis of mesoporous Sr₂MgSi₂O₇:Eu²⁺, Dy³⁺ energy storage carriers using cetyl trimethyl ammonium bromide as a template

X. Wei, J. Fan, X. Zhou, Y. Shen, X. Hu, G. Zuo

Vol. 7, No. 4, Pages 477-482 DOI: 10.4416/JCST2016-00046

Keywords: Keywords: Ceramics, Sr₂MgSi₂O₇:Eu²⁺, Dy³, porous materials, energy storage, luminescence

Abstract | References | Full Article

Special and Topcial Issues

Topical Issue, 3/2017
Guest Editors:
Waltraud M. Kriven and Gregor J. G. Gluth
Geopolymers

Special Issue, 1/2017
Guest Editor:
Alexander Michaelis
6th International Congress on Ceramics (ICC6)

Topical Issue, 2/2016
Guest Editor:
Christos Aneziris
Low carbon and carbon-free refractory approaches for advan-ced steel technologies; A challenge for refractory materials and systems.

Topcial Issue, 4/2015
Low Temperature Co-fired Ceramics - LTCC

Topcial Issue, 2/2015
Status of Additive Manufacturing with Ceramics

Topical Focus, 4/2014
Materials Processing Science with Lasers as Energy Sources

Topical Issue, 2/2014
Guest Editor:
Christos Aneziris
Low carbon and carbon-free refractory approaches for advanced steel technologies; A challenge for refractory materials and systems.

Special Issue, 2/2013
Guest Editor:
Alexander Michaelis
Ceramic Materials and Components for Energy and Environmental Applications

Topical Issue, 1/2013
Ceramic Processing Science with Lasers as Energy Sources

Printed version

jcst 2015 02 cover

Order journal subscription