Articles
All articles | Recent articles
Effect of As-Cast Al2O3 Nanoparticles on Dynamic Recrystallization Behavior and Mechanical Properties of Mg-Gd-Y Alloy
Yan-Qiong Ma, Shuang Han, He Ma, Jian-She Lian
Key Laboratory of Automobile Materials, Ministry of Education, College of Materials Science and Engineering, Jilin University, Changchun 130025, China
received August 21, 2025, received in revised form October 3, 2025, accepted October 9, 2025
Vol. 17, No. 1, Pages 83-92 DOI: 10.4416/JCST2025-00022
Abstract
This study investigates the influence of as-cast γ-Al2O3 nanoparticles on the dynamic recrystallization and mechanical properties of an Mg-10Gd-3Y alloy. Alumina nanoparticles (∼ 35 nm), synthesized via a green method using Mentha pulegium extract, were incorporated into the Mg alloy by means of stir-casting followed by extrusion. Microstructural characterization revealed uniform nanoparticle dispersion and grain refinement from 10.2 µm to 6.1 µm, accompanied by weakened basal texture. X-ray photoelectron spectroscopy confirmed strong interfacial bonding, with Al2O3-related peaks at 74.8 eV and O 1s components at 531 – 532.5 eV. Mechanical testing demonstrated that 2 wt% Al2O3 increased the yield strength from 280 MPa to 320 MPa and ultimate tensile strength from 350 MPa to 380 MPa, while improving ductility to 20 %. Microhardness rose from 81 HV to 102 HV with increasing nanoparticle content. Dynamic recrystallization (DRX) analysis via EBSD and hot compression revealed accelerated DRX kinetics, achieving ∼ 60 % recrystallized grains at a true strain of 0.2 at 450 °C. Process maps identified optimal hot working conditions at 400 °C and strain rates of 0.01 – 0.1 s-1, with dissipation efficiency η reaching 0.5. Fractography showed ductile failure with uniform dimples and no evidence of particle debonding. The synergy between Al2O3 nanoparticles and LPSO phases enhances grain boundary nucleation and suppresses flow localization. These findings demonstrate that nanoparticle reinforcement offers a viable strategy to improve strength-ductility balance and high-temperature formability in RE-containing Mg alloys.
Download Full Article (PDF)
Keywords
Grain refinement, Orowan strengthening, texture evolution, particle-matrix interface, process map.
References
1 Baral, S., Thawre, M., Sunil, B., Dumpala, R.: A review on developing high-performance ZE41 magnesium alloy by using bulk deformation and surface modification methods, J. Magnes. Alloys, 11, 776 – 800, (2023). doi: https://doi.org/10.1016/j.jma.2023.03.001
2 Geshani, M., Kalayeh, P., Asadi, A., Mirzadeh, H., Malekan, M., Emamy, M.: A review of mg alloys containing long-period stacking ordered (LPSO) structures with insight into the application of friction stir processing, J. Mater. Res. Technol., 24, 4945 – 4966, (2023). doi: https://doi.org/10.1016/j.jmrt.2023.04.105
3 Basu, I., Chen, M., Wheeler, J., Schäublin, R., Löffler, J.: Stacking-fault mediated plasticity and strengthening in lean, rare-earth free magnesium alloys, Acta Mater, 211, 116877, (2021). doi: https://doi.org/10.1016/j.actamat.2021.116877
4 Li, Z., Wang, J., Yan, R., Chen, Z., Ni, T., Dong, Z., Lu, T.: Effect of ce addition on hot deformation behavior and microstructure evolution of AZ80 magnesium alloy, J. Mater. Res. Technol., 16, 1339 – 1352, (2021). doi: https://doi.org/10.1016/j.jmrt.2021.12.083
5 Zhang, X., Shi, Y., Li, J., Yue, H., Li, C., Ma, J., Jin, Q., Guo, S., Li, C., Chen, Q.: Effect of stacking faults and long period stacking order on mechanical properties for rare-earth magnesium alloy: As-cast versus as-solutioned, J. Mater. Res. Technol., 29, 1601 – 1615, (2024). doi: https://doi.org/10.1016/j.jmrt.2024.01.214
6 Xu, C., Nakata, T., Qiao, X., Zheng, M., Wu, K., Kamado, S.: Effect of LPSO and SFs on microstructure evolution and mechanical properties of mg-gd-Y-Zn-zr alloy, Sci. Rep, 7, 40846, (2017). doi: https://doi.org/10.1038/srep40846
7 Garcés, G., Medina, J., Pérez, P., Barea, R., Lim, H., Kim, S., Maawad, E., Schell, N., Adeva, P.: Study of tensile and compressive behavior of ECO-Mg97Gd2Zn1 alloys containing long-period stacking ordered phase with lamellar structure, Metals, 14, 530, (2024). doi: https://doi.org/10.3390/met14050530
8 Mahinroosta, M., Allahverdi, A.: Production of nanostructured γ-alumina from aluminum foundry tailing for catalytic applications, Int. Nano Lett, 8, 255 – 261, (2018). doi: https://doi.org/10.1007/s40089-018-0247-1
9 Krishna, D., Philip, J.: Review on surface-characterization applications of X-ray photoelectron spectroscopy (XPS): recent developments and challenges, Appl. Surf. Sci. Adv, 12, 100332, (2022). doi: https://doi.org/10.1016/j.apsadv.2022.100332
10 Zhang, Z., Wang, L., Zeng, M., Zeng, R., Lin, C., Wang, Z., Chen, D., Zhang, Q.: Corrosion resistance and superhydrophobicity of one-step polypropylene coating on anodized AZ31 mg alloy, J. Magnes. Alloys, 9, 1443 – 1457, (2020). doi: https://doi.org/10.1016/j.jma.2020.06.011
11 Syrkov, A., Ngo, K., Taraban, V., Tomaev, B.: Formation of hydrophobic surface compounds of metals by solid-state synthesis using silicon hydride reagents, Bull. St. Petersburg State Inst. Technol., 68, 33 – 39, (2024). doi: https://doi.org/10.36807/1998-9849-2024-68-94-33-39
12 Łozinko, A., Gholizadeh, R., Zhang, Y., Klement, U., Tsuji, N., Mishin, O., Guo, S.: Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy, Mater. Sci. Eng. A, 833, 142558, (2021). doi: https://doi.org/10.1016/j.msea.2021.142558
13 Karthik, R., Sankaran, N., Raja, K., Venkatesh, R.: Characteristics performance evaluation of AZ91-fly ash composite developed by vacuum associated stir processing, Int. J. Cast Met. Res, 1 – 8, (2024). doi: https://doi.org/10.1080/13640461.2024.2364129
14 Larraza, A., Burke, S., Bagha, P., Razavi, M.: Fabrication and processing of magnesium-based metal matrix nanocomposites for bioabsorbable implants, Metals, 14, 1318, (2024). doi: https://doi.org/10.3390/met14121318
15 Chen, B., Qi, L., Fu, J., Zhang, Q., Zhou, J.: Preparation of the high compressive performance special-shaped Csf/AZ91D composite part using the liquid-solid extrusion following vacuum pressure infiltration process, J. Magnes. Alloys, 13, 1617 – 1629, (2024). doi: https://doi.org/10.1016/j.jma.2024.04.034
16 Wu, Z., Zhang, C., Zhu, Y., Lu, Z., Liu, H., Xu, B., Zhang, X., Tian, W.: Visualization of macrophase separation and transformation in immiscible polymer blends, CCS Chem., 5, 718 – 728, (2022). doi: https://doi.org/10.31635/ccschem.022.202101726
17 Helal, M., Fadl-Alah, A., Baraka, Y., Gad, M., Emam, A.: In-vitro comparative evaluation for the surface properties and impact strength of CAD/CAM milled, 3D printed, and polyamide denture base resins, J. Int. Soc. Prev. Community Dent, 12, 126 – 131, (2022). https://doi.org/10.4103/jispcd.jispcd_293_21
18 Zhong, J., Xu, Q.: High-temperature mechanical behaviors of SiO2-based ceramic core for directional solidification of turbine blades, Materials, 13, 4579, (2020). doi: https://doi.org/10.3390/ma13204579
19 Li, X., Hou, L., Wei, Y., Wei, Z.: Constitutive equation and hot processing map of a nitrogen-bearing martensitic stainless steel, Metals, 10, 1502, (2020). doi: https://doi.org/10.3390/met10111502
20 Egzar, H., Yahya, W., Ridha, N., Sahap, E.: Electrochemical preparation of aluminum oxide nanoparticles and using for remove chromotrope-E122 dye, Int. J. Health Sci., 7613 – 7620, (2022). doi: https://doi.org/10.53730/ijhs.v6ns3.7764
21 Wang, T., Yin, Z., Guo, Y., Bai, F., Chen, J., Dong, W., Liu, J., Hu, Z., Chen, L., Li, Y., Su, B.: Highly selective photocatalytic conversion of glucose on holo-symmetrically spherical three-dimensionally ordered macroporous heterojunction photonic crystal, CCS Chem., 5, 1773 – 1788, (2022). doi: https://doi.org/10.31635/ccschem.022.202202213
22 Yang, H., Wang, X., Zheng, T., Cantillo, N., Goenaga, G., Zawodzinski, T., Tian, H., Wright, J., Meulenberg, R., Wang, X., Xia, Z., Ma, S.: CrN-encapsulated hollow Cr-N-C capsules boosting oxygen reduction catalysis in PEMFC, CCS Chem., 3, 208 – 218, (2020). doi: https://doi.org/10.31635/ccschem.020.202000645
23 Baldovino-Medrano, V., Niño-Celis, V., Giraldo, R.: Systematic analysis of the nitrogen Adsorption-Desorption isotherms recorded for a series of materials based on Microporous-Mesoporous amorphous aluminosilicates using classical methods, J. Chem. Eng. Data, 68, 2512 – 2528, (2023). doi: https://doi.org/10.1021/acs.jced.3c00257
24 Naiel, B., Fawzy, M., Halmy, M., Mahmoud, A.: Green synthesis of zinc oxide nanoparticles using sea lavender (Limonium pruinosum L. Chaz.) extract: characterization, evaluation of anti-skin cancer, antimicrobial and antioxidant potentials, Sci. Rep, 12, 20370, (2022). doi: https://doi.org/10.1038/s41598-022-24805-2
25 El-Belely, E., Farag, M., Said, H., Amin, A., Azab, E., Gobouri, A., Fouda, A.: Green synthesis of zinc oxide nanoparticles (ZnO-NPs) using arthrospira platensis (Class: Cyanophyceae) and evaluation of their biomedical activities, Nanomaterials, 11, 95, (2021). doi: https://doi.org/10.3390/nano11010095
26 Injor, O., Daramola, O., Adewuyi, B., Adediran, A., Ramakokovhu, M., Sadiku, R., Akinlabi, E.: Grain refinement of Al-Zn-Mg alloy during equal channel angular pressing (ECAP), Results Eng., 16, 100739, (2022). doi: https://doi.org/10.1016/j.rineng.2022.100739
27 Wei, Z., Mu, W., Liu, S., Wang, F., Zhou, L., Wang, Z., Mao, P., Liu, Z.: Effects of gd on hot tearing susceptibility of as-cast Mg96.94-Zn1-Y(2-X)-Gdx-Zr0.06 alloys reinforced with lpso phase, J. Alloys Compd., 926, 166895, (2022). doi: https://doi.org/10.2139/ssrn.4143230
28 Jiang, M., Xu, C., Yan, H., Nakata, T., Chen, Z., Lao, C., Chen, R., Kamado, S., Han, E.: Quasi-in-situ observing the rare earth texture evolution in an extruded mg-zn-gd alloy with bimodal microstructure, J. Magnes. Alloys, 9, 1797 – 1805, (2020). doi: https://doi.org/10.1016/j.jma.2020.09.001
29 Chaudhary, V., Verma, R., Sharma, V.: Effect of nanoparticles adhesion and multipass friction stir processing on metallurgical properties of AZ91D magnesium alloy, J. Adhes. Sci. Technol., 38, 1953 – 1973, (2023). doi: https://doi.org/10.1080/01694243.2023.2282828
30 Zheng, X., Xue, Y., Zhang, C., Li, Y.: Controlled growth of multidimensional interface for high-selectivity ammonia production, CCS Chem., 5, 1653 – 1662, (2022). doi: https://doi.org/10.31635/ccschem.022.202202189
31 Fan, H., Li, X., Zhou, J., Wang, X., Gao, X., Hu, H., Zhou, L., Cai, T., Cui, Y., Liu, P., Xue, Q., Yan, Z., Xing, W.: Realizing the long lifespan of molybdenum trioxide in aqueous aluminum ion batteries through potential regulation, Renewables, 1, 455 – 464, (2023). doi: https://doi.org/10.31635/renewables.023.202200019
32 Zhong, S., Wang, Y., Lan, J., Xie, M., Wu, Y., Li, J., Liu, F., Jiang, L., Peng, J., Yuan, L., Zhai, M., Shi, W.: Radiation-assisted synthesis of crown ether-modified covalent organic frameworks for lithium isotope separation, CCS Chem., 6, 2594 – 2606, (2024). doi: https://doi.org/10.31635/ccschem.024.202303787
33 Luo, T., Wang, Z., Han, X., Chen, Y., Iuga, D., Lee, D., An, B., Xu, S., Kang, X., Tuna, F., McInnes, E., Hughes, L., Spencer, B., Schröder, M., Yang, S.: Efficient photocatalytic reduction of CO2 catalyzed by the Metal-Organic framework MFM-300(Ga), CCS Chem., 4, 2560 – 2569, (2022). doi: https://doi.org/10.31635/ccschem.022.202201931
34 Lin, R., Liu, B., Zhang, J., Zhang, S.: Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys, J. Mater. Res. Technol., 19, 354 – 367, (2022). doi: https://doi.org/10.1016/j.jmrt.2022.05.011
35 Wu, Y., Wang, H., Ban, C.: Effect of fe content on the microstructure and properties of Hot-extruded 6061 aluminum alloy, J. Phys. Conf. Ser., 1986, 012011, (2021). doi: https://doi.org/10.1088/1742-6596/1986/1/012011
36 Subramani, M., Huang, S., Borodianskiy, K.: Effect of SiC nanoparticles on AZ31 magnesium alloy, Materials, 15, 1004, (2022). doi: https://doi.org/10.3390/ma15031004
37 Mercado-Lemus, V., Gómez-Esparza, C., Díaz-Guillén, J., Mayén, J., Flores-Gallegos, A., Arcos-Gutiérrez, H., Hernández-Hernández, M., Garduño, I., Betancourt-Cantera, J., Pérez-Bustamante, R.: Wear dry behavior of the Al-6061-Al2O3 composite synthesized by mechanical alloying, Metals, 11, 1652, (2021). doi: https://doi.org/10.3390/met11101652
38 Dangwal, S., Edalati, K., Valiev, P., Langdon, T.: Breaks in the Hall-Petch relationship after severe plastic deformation of magnesium, aluminum, copper, and iron, Crystals, 13, 413, (2023). doi: https://doi.org/10.3390/cryst13030413
39 Jaimin, A., Kotkunde, N., Singh, S., Saxena, K.: Studies on flow stress behaviour prediction of AZ31B alloy: microstructural evolution and fracture mechanism, J. Mater. Res. Technol., 27, 5541 – 5558, (2023). doi: https://doi.org/10.1016/j.jmrt.2023.10.206
40 Tian, Y., Zhang, P., Zhao, G., Li, H., Ma, L., Li, J.: A systematic study on thermo-mechanical behavior, processing maps and recrystallization mechanism of Incoloy825 superalloy during hot compression, J. Mater. Res. Technol., 28, 4551 – 4566, (2024). doi: https://doi.org/10.1016/j.jmrt.2024.01.042
41 Mirzadeh, H.: Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review, J. Mater. Res. Technol., 25, 7050 – 7077, (2023). doi: https://doi.org/10.1016/j.jmrt.2023.07.150
42 Zhang, N., Liu, M., Li, Q., Chen, X., Zheng, Z.: Effect of long-period stacking ordered phase on dynamic recrystallization in Mg-Y-Zn-zr alloy processed by backward extrusion, J. Mater. Res. Technol., 26, 2384 – 2393, (2023). doi: https://doi.org/10.1016/j.jmrt.2023.08.089
43 Moretti, M., Dalai, B., Åkerström, P., Arvieu, C., Jacquin, D., Lacoste, É., Lindgren, L.: High strain rate deformation behavior and recrystallization of alloy 718, Metall. Mater. Trans. A, 52, 5243 – 5257, (2021). doi: https://doi.org/10.1007/s11661-021-06463-7
44 Yan, Z., Li, L., Zhu, J., Ren, L., Xue, Y., Wang, Q., Zhang, Z.: Deformation behavior of LPSO phases, grain refinement mechanism, and texture evolution of a mg-gd-Y-Zn-zr alloy processed by forward extrusion combined with dual-directional angular deformation, J. Mater. Res. Technol., 28, 4131 – 4141, (2024). doi: https://doi.org/10.1016/j.jmrt.2024.01.032
45 Yin, J., Liu, Y., Zhu, G.: Microstructural evolution and thermal stability of long period stacking ordered phases in Mg97Er2Ni1 and Mg97Er2Zn1 alloys, Crystals, 14, 1092, (2024). doi: https://doi.org/10.3390/cryst14121092
46 Tan, Z., Li, J., Zhang, Z.: Experimental and numerical studies on fabrication of nanoparticle reinforced aluminum matrix composites by friction stir additive manufacturing, J. Mater. Res. Technol., 12, 1898 – 1912, (2021). doi: https://doi.org/10.1016/j.jmrt.2021.04.004
47 Song, X., Bayati, P., Gupta, M., Elahinia, M., Haghshenas, M.: Fracture of magnesium matrix nanocomposites - A review, Int. J. Lightweight Mater. Manuf., 4, 67 – 98, (2020). doi: https://doi.org/10.1016/j.ijlmm.2020.07.002
Copyright
Göller Verlag GmbH
