Articles
All articles | Recent articles
Investigating the Use of Sugar Alcohol as an Alternative Non-Toxic Binder to Conventional Coal Tar/Coal Tar Pitch for Use in Taphole Clay
I. Cameron, A. Garbers-Craig
Centre for Pyrometallurgy, Department of Materials Science and Metallurgical Engineering, University of Pretoria, South Africa
received October 1, 2024, received in revised form April 1, 2025, accepted April 30, 2025
Vol. 16, No. 3, Pages 141-152 DOI: 10.4416/JCST2024-00019
Abstract
Currently, the main purpose for obtaining alternative binders for use in taphole clay is to reduce the exposure to harmful polycyclic aromatic hydrocarbons (PAH) associated with conventional coal tar (CTht) binders. Some advances have been made such as using lower-PAH alternative binders or phenolic resole resins (resin-bonded) in taphole clays. The use of non-toxic binders has become exceedingly difficult due to the versatility of CTht in taphole clay. This study investigated a combination binder system that consisted of a sugar alcohol (research-grade glycerine) and phenolic resole resin as a potential non-toxic binder for use in platinum smelting taphole clay. The binder system was characterized according to its composition by means of Fourier-transform infrared spectroscopy and the PAH content (16-EPA-PAH) was determined using targeted gas chromatography mass spectroscopy. Flow behaviour of the binder was determined based on rotational rheology, and the volatilization and rheological thermal stability of the binders were assessed by means of thermogravimetric analysis and thermorheology, respectively. The effect of mixing these binder constituents on the cross-linking behaviour of the phenolic resin was evaluated using differential scanning calorimetry. The combination binder had a higher average mass loss and lower carbon yield compared to conventional CTht, but with a lower total PAH content, making it a more health-friendly alternative.
Download Full Article (PDF)
Keywords
Taphole clay, binder, PAH, non-toxic, sugar alcohol, resole resin.
References
1 Wang, L., Yin, Y., Qiu, W., Liang, Y., Ruan, G., Zhao, L.: Effects of pitch addition on the properties of environmentally-friendly tap-hole clay, JCS-Japan, 125, [2], 12 – 18, (2017).
2 Cameron, I.J., Ramjee, S., Garbers-Craig, A.M.: A comparative study between coal tar pitch and lower polycyclic aromatic hydrocarbon (PAH) alternative binders for use in taphole clays, Open Cer., 16, [1], 1 – 12, (2023).
3 Kitamura, M.: Optimizing Taphole Clay Technology. Tokyo: Shinagawa Technical, 16, [1], 1 – 5, (2014). doi: https://doi.org/10.1016/B0-08-043152-6/01662-4.
4 Allen, D., Ishida, H.: Thermosets: Phenolics, Novolacs, and Benzoxazine. 1st Edition. Cambridge: Pergamon, 2001.
5 Siva, R., Raffi, M., Srinivasa, R.: Experimental study on environmental friendly tap hole clay for blast furnace, IOP Conf. Ser.: Mater. Sci. Eng, 330, 1 – 13, (2017). doi: https://doi.org/10.1088/1757-899X/330/1/012056.
6 Renda, C., Bertholdo, R.: Study of phenolic resin and their tendency for carbon graphitization, J. Polym. Sci., 25, 241, (2018). doi: https://doi.org/10.1007/s10965-018-1635-y.
7 Sako, E., Orsolini, H., da Silva, B., Galesi, G.: Graphene-like structured tap hole clay for stable blast-furnace drainage and lower CO2 emissions. In: Proceeding for the XLII ALAFAR Congress. ALAFAR, Brazil, 2022.
8 Copetti, G.: Blast Furnace Taphole Clay and Cast House – A Greener Approach. In: Proceedings for the 8th International Conference on Refractories (ICRJ). Jamshedpur, India, 2023.
9 Nelson, L., Hundermark, R.: The 'tap-hole' – key to furnace performance. In: Proceedings for the Furnace Tapping Conference. SAIMM, Johannesburg, 2014.
10 Gardziella, A., Pilato, L., Knop, A.: Phenolic Resins: Chemistry, Reactions, Mechanism, 24 – 82, Phenolic Resins, Heidelberg: Springer Berlin, 2000.
11 Cameron, I.J., Garbers-Craig, A.: Understanding how the Binder System Influences the Properties and Process Performance Indicators of Taphole Clays, In: Refractories Worldforum, Baden-Baden, (2024).
12 Cameron, I.J.: Investigating premature ageing of blast furnace taphole clay containing a resole resin and liquid pitch binder. Master Dissertation, University of Pretoria, 2021.
13 Danish, M., Mumtaz, M., Fakhar, M., Rashid, U.: Response surface methodology based optimized purification of the residual glycerol from biodiesel production process, Chiang Mai J. Sci., 44, [4], 1 – 13, (2016).
14 Fosu, M., Ofori-Kwakye, K., Kuntworbe, N., Bonsu, M.: Investigation of blends of cashew and xanthan gums as a potential carrier for colonic delivery of ibuprofen, Int. J. Pharmtech., 9, [7], 369 – 380, (2016).
15 Bobrowski, A., Grabowska, B.: FTIR method in studies of the resol-type phenolic resin structure in the air atmosphere over certain time intervals, Metal. and Fou. Eng., 41, [3], 107 – 113, (2015).
16 Andreikov, E.I., Amosova, I.S., Pervova, M.G.: Determining the content of polycyclic aromatic hydrocarbons in industrial samples of coal tar and pitch, Coke Chem, 51, [8], 321 – 325, (2008).
17 United States Department of Labor.: Permissible Exposure Limits - OSHA Annotated Table Z-1. https://www.osha.gov/annotated-pels/table-z-1 (accessed 12 January 2023).
18 National Library of Medicine.: Fluoranthene C16H10. PubChem. https://pubchem.ncbi.nlm.nih.gov/compound/Fluoranthene (accessed 12 January 2023).
19 New Jersey Department of Health.: Hazardous substance fact sheet - Benz(a)anthracene. https://nj.gov/health/eoh/rtkweb/documents/fs/0193.pdf (accessed 12 January 2023).
20 New Jersey Department of Health and Senior Services.: Hazardous substance fact sheet - Benzo(b)fluoranthene. https://nj.gov/health/eoh/rtkweb/documents/fs/0208.pdf (accessed 12 January 2023).
21 New Jersey Department of Health.: Hazardous substance fact sheet - Dibenz(a,h)anthracene. https://nj.gov/health/eoh/rtkweb/documents/fs/0622.pdf (accessed 12 January 2023).
22 Agilent Technologies.: Safety data sheet - Acenaphthylene Standard (1X1 mL). https://www.agilent.com/cs/library/msds/P-620 – 1_NAEnglish.pdf (accessed 12 January 2023).
23 Sarika, P., Nancarrow, P., Khansaheb, A., Ibrahim, T.: Bio-based alternatives to phenol and formaldehyde for the production of resins, Polymers, 12, [10], 2 – 24, (2020). doi: https://doi.org/10.3390/polym12102237.
24 Siddiqui, H., Mahmood, N., Yuan, Z., Crapulli, F.: Sustainable bio-based phenol-formaldehyde resoles using hydrolytically depolymerized kraft lignin, Molecules, 22, [11], 1 – 19, (2017). doi: https://doi.org/10.3390/molecules22111850.
25 Zhang, J., Mei, G., Xie, Z., Zhao, S.: Curing mechanism of phenolic resin binder for oxide-carbon refractories, ISIJ Int., 56, [1], 44 – 49, (2016). doi: https://doi.org/10.2355/isijinternational.ISIJINT-2015-260.
26 De Pretto, A., Lindstad, L.: Health-friendly plugging repair paste. In: Proceedings for the Furnace Tapping Conference. Springer International Publishing, Anaheim, California, USA, 2022.
Copyright
Göller Verlag GmbH
