Articles
All articles | Recent articles
Antioxidant Coating Composed of SiC on Carbon Fibers by Chemical Vapor Reaction
J. Hao1,2, J. Li1,2, W. Shi1,2,3, Y. Tan1,2, X. Ding3
1 Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Dalian University of Technology), Ministry of Education, Dalian 116024, China
2 School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
3 School of Mechanical and Power Engineering, Dalian Ocean University, Dalian 116023, China
received April 7, 2018, received in revised form April 26, 2018, accepted May 29, 2018
Vol. 9, No. 4, Pages 465-470 DOI: 10.4416/JCST2018-00033
Abstract
A silicon carbide (SiC) coating was prepared on the surface of carbon fibers by means of chemical vapor reaction (CVR) at different temperature. The phase, microstructure and oxidation behavior of the SiC coating prepared from 1 723 to 1 923 K were investigated. The SiC coating becomes thicker and the SiC grains grow with the increase in reaction temperature. The oxidation resistance of carbon fibers can be improved significantly by the SiC coating, and the oxidation resistance of the carbon fibers increases as the reaction temperature increases. The initial oxidation temperature of the SiC-coated carbon fibers prepared at 1 923 K is about 90 K higher than that of the uncoated carbon fibers. The apparent activation energy for the synthesis of the SiC coating by means of CVR is calculated based on the thickness of the SiC coating, which is about 118.06 KJ/mol.
Download Full Article (PDF)
Keywords
Carbon fibers, SiC, coating, oxidation behavior
References
1 Morgan, P.: Carbon fibers and their composites. Marcel Dekker, 2005.
2 Chawla, K.K.: Carbon fiber composites. Butterworth-Heinemann, 1987.
3 Wang, Y.Q., Zhou, B.L., Wang, Z.M.: Oxidation protection of carbon fibers by coatings, Carbon, 33, 427 – 433, (1995).
4 Wang, Y.Q., Zhou, B.L.: Behaviour of coatings on reinforcements in some metal matrix composites, Composites Part A, 27, 1139 – 1145, (1996).
5 Piquero, T., Vincent, H., Vincent, C., Bouix, J.: Influence of carbide coatings on the oxidation behavior of carbon fibers, Carbon, 33, 455 – 467, (1995).
6 Hackl, G., Gerhard, H., Popovska, N.: Coating of carbon short fibers with thin ceramic layers by chemical vapor deposition, Thin Solid Films, 513, 217 – 222, (2006).
7 Kusakabe, K.: Coating of carbon fibers with amorphous SiC films as diffusion barriers by chemical vapor deposition with triisopropylsilane, Carbon, 34, 179 – 185, (1996).
8 Lee, Y.J.: Formation of silicon carbide on carbon fibers by carbothermal reduction of silica, Diamond Relat. Mater., 13, 383 – 388, (2004).
9 Ding, D., Zhou, W., Luo, F., Chen, M., Zhu, D.: Mechanical properties and oxidation resistance of SiCf/CVI-SiC composites with PIP-SiC interphase, Ceram. Int., 38, 3929 – 3934, (2012).
10 Shi, W., Tan, Y., Hao, J., Li, J.: Microstructure and anti-erosion property of SiC coated 2D C/C composites by chemical vapor reaction, Ceram. Int., 42, 17666 – 17672, (2016).
11 Ouyang, H., Li, H., Qi, L., Li, Z., Fang, T., Wei, J.: Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration, J. Mater. Sci., 43, 4618 – 4624, (2008).
12 Ouyang, H., Li, H., Qi, L., Li, Z., Jian, W., Wei, J.: Synthesis of a silicon carbide coating on carbon fibers by deposition of a layer of pyrolytic carbon and reacting it with silicon monoxide, Carbon, 46, 1339 – 1344, (2008).
13 Xue, C., Bai, H., Tao, PF., Wang, J.W., Jiang, N., Wang, S.L.: Thermal conductivity and mechanical properties of flake graphite/Al composite with a SiC nano-layer on graphite surface, Mater. Des., 108, 250 – 258, (2016).
14 Ma, Q.B., Ziegler, J., Kaiser, B., Fertig, D., Calvet, W., Murugasen, E.: Solar water splitting with p-SiC film on p-Si: photoelectrochemical behavior and XPS characterization, Int. J. Hydrogen Energy., 39, 1623 – 1629, (2014).
15 Wang, S., Chen, Z.H., Ma, W.J., Ma, Q.S.: Influence of heat treatment on physical-chemical properties of PAN-based carbon fiber, Ceram. Int, 32, 291 – 295, (2006).
16 Zhang, L.B., Wang, J.Q., Wang, H.G., Xu, Y., Wang, Z.F., Li, Z.P.: Preparation, mechanical and thermal properties of functionalized graphene/polyimide nanocomposites, Composites Part A., 43, 1537 – 1545, (2012).
17 Xia, K., Lu, C., Yang, Y.: Preparation of anti-oxidative SiC/SiO2 coating on carbon fibers from vinyltriethoxysilane by sol-gel method, Appl. Surf. Sci., 265, 603 – 609, (2013).
18 Wang, C., Bai, H., Xue, C., Tong, X., Zhu, Y., Jiang, N.: On the influence of carbide coating on the thermal conductivity and flexural strength of X (X = SiC, TiC) coated graphite/Al composites, RSC Adv., 6, (2016).
19 Yao, J., Yu, W., Pan, D.: Tensile strength and its variation of PAN-based carbon fibers. III. Weak-link analysis, J. Appl. Polym. Sci., 110, 3778 – 3784, (2010).
20 Morisada, Y., Miyamoto, Y., Moriguchi,H., Tsuduki, K., Ikegaya, A.: Growth mechanism of nanometer-sized SiC and oxidation resistance of SiC-coated diamond particles, J. Am. Ceram. Soc., 87, 809 – 13, (2010).
Copyright
Göller Verlag GmbH