Articles
All articles | Recent articles
Relationship of Optical Properties and Elastoplastic Characteristics of Transparent Spark-Plasma-Sintered YSZ Ceramics
O. L. Khasanov, E. S. Dvilis, Z. G. Bikbaeva, V. D. Paygin, A. O. Khasanov
Department of Nanomaterials and Nanotechnologies, National Research Tomsk Polytechnic University, Tomsk, Russia-634050
received October 31, 2016, received in revised form December 31, 2016, accepted January 21, 2017
Vol. 8, No. 1, Pages 161-168 DOI: 10.4416/JCST2016-00105
Abstract
Transparent yttria-stabilized zirconia (YSZ) ceramics were sintered with the SPS method in different conditions. The optical and corresponding mechanical properties of the sintered samples were studied. A parameter for optimizing SPS processing has been suggested which characterizes optical transparency versus sample thickness. The dynamic evolution of the swelling areas over time after local indentation of transparent YSZ ceramics was shown. The appearance of spalls from the swelling areas depends on the degree of internal mechanical stresses in the given region of the sample and is explained by the relaxation of stresses accumulated on deformation during static indentation.
Download Full Article (PDF)
Keywords
YSZ, transparent ceramics, optical properties, mechanical properties, indentation, swelling, spalls, stress relaxation dynamics
References
1 Wang, S.F., Zhang, J., Luo, D.W., Gu, F., Tang, D.Y., Dong, Z.L., Tan, G.E.B., Que, W.X., Zhang, T.S., Li, S., Kong, L.B.: Transparent ceramics: Processing, materials and applications, Prog. Solid State Chem., 41, 20 – 54, (2013).
2 Yamashita, I., Kudo, M., Tsukuma, K.: Development of highly transparent zirconia ceramics, Tosoh Res. Technol. Rev., 56, 11 – 16, (2012).
3 Zhang, H., Li, Z., Kim, B.-N., Morita, K., Yoshida, H., Hiraga, K., Sakka, Y.: Highly infrared transparent nanometric tetragonal zirconia prepared by high-pressure spark plasma sintering, J. Am. Ceram. Soc., 94, [9], 2739 – 2741, (2011).
4 Lei, L.W., Fu, Z.Y., Wang, H., Lee, S.W., Niihara, K.: Transparent yttria stabilized zirconia from glycine-nitrate process by spark plasma sintering, Ceram. Int., 38, [1], 23 – 28, (2012).
5 Zhang, H.B, Kim, B.-N., Morita, K., Yoshida, H., Lim, J.-H., Hiraga, K.: Optimization of high-pressure sintering of transparent zirconia with nano-sized grains, J. Alloy. Compd., 508, 196 – 199, (2010).
6 Zhang, H.B., Kim, B.-N., Morita, K., Hiraga, H.Y.K., Sakka, Y.: Effect of sintering temperature on optical properties and microstructure of translucent zirconia prepared by high pressure spark plasma sintering, Sci. Tech. Adv. Mater., 12, 1 – 6, (2011).
7 Alaniz, J.E., Perez-Gutierrez, F.G., Aguilar, G., Garay, J.E.: Optical properties of transparent nanocrystalline yttria stabilized zirconia, Opt. Mater., 32, 62 – 68, (2009).
8 Casolco, S.R., Xu, J., Garay, J.E.: Transparent/translucent polycrystalline nanostructured yttria stabilized zirconia with varying colors, Scripta. Mater., 58, 516 – 519, (2008).
9 Ghosh, S., Garay, J.E. et al.: Thermal properties of the optically transparent pore-free nanostructured yttria-stabilized zirconia, J. Appl. Phys., 106, [113507], 1 – 4, (2009).
10 Anselmi-Tamburini, U., Woolman, J.N., Munir, Z.A.: Transparent nanometric cubic and tetragonal zirconia obtained by high-pressure pulsed electric current sintering., Adv. Funct. Mater., 17, [16], 3267 – 3273, (2007).
11 Lakki, A., Herzog, R., Weller, M. et al.: Mechanical loss, creep, diffusion and ionic conductivity of ZrO2-8 mol% Y2O3 polycrystals, J. Eur. Ceram. Soc., 20, 285 – 296, (2000).
12 Kandil, H.M., Greiner, J.D., Smith, J.F.: Single-crystal elastic constants of yttria-stabilized zirconia in the range 20±700, J. Am. Ceram. Soc., 67, 341 – 346, (1984).
13 Dahl, P., Kaus, I., Johnsson, M. et al.: Densification and properties of zirconia prepared by three different sintering techniques, Ceram. Int., 33, 1603 – 1610, (2007).
14 Xue, W., Xie, Z., Yi, J., Wang, C.-A.: Spark plasma sintering and characterization of 2Y-TZP ceramics, Ceram. Int., 41, 4829 – 4835, (2015)
15 Zhang, F., Wanmeensel, K., Batuk, M. et al.: Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation, Acta Biomater., 16, 215 – 222, (2015).
16 Ebeid, K., Wille, S., Hamady, A. et al.: Effect of changes in sintering parameters on monolithic translucent zirconia, Dent. Mater., 30, 4419 – 4424, (2014).
17 Zhang, Y.: Making yttria-stabilized tetragonal zirconia translucent, Dent. Mater., 30, 1195 – 1203, (2014).
18 Hallmann, L., Ulmer, P., Wille, S. et al.: Effect of surface treatments on the properties and morphological change of dental zirconia, J. Prosthet. Dent., 115, 341 – 349, (2016).
19 Niihara, K., Morena, R. Hasselman, D.P.H.: Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios, J. Mater. Sci. Lett., 1, 13 – 16, (1982)
20 Nosov, Yu.G., Derkachenko, L.I.: Aftereffect in microhardness testing of corundum, Tech. Phys., 48, [10], 1354 – 1457, (2003).
21 Khasanov, O.L., Struts, V.K., Dvilis, E.S., Bikbaeva, Z.G. et al.: Spall fracture of ceramics surface by indentation (In Russian), Rus. Phys. J., 5, [2], 276 – 282, (2012).
Copyright
Göller Verlag GmbH