Articles
All articles | Recent articles
Development of Damage-Tolerant Ceramic Matrix Composites (SiC/SiC) using Si-BN/SiC/pyC Fiber Coatings and LSI Processing
B. Mainzer1, R. Jemmali1, P. Watermeyer2, K. Kelm2, M. Frieß1, D. Koch1
1 Institute of Structures and Design, German Aerospace Center (DLR), Pfaffenwaldring 38 – 40, D-70569 Stuttgart, Germany
2 Institute of Materials Research, German Aerospace Center (DLR) Linder Höhe, D-51147 Cologne, Germany
received October 31, 2016, received in revised form January 6, 2017, accepted January 27, 2017
Vol. 8, No. 1, Pages 113-120 DOI: 10.4416/JCST2016-00095
Abstract
Silicon-carbide-fiber-reinforced silicon carbide matrix composites (SiC/SiC) exhibit good thermal shock resistance, a low coefficient of thermal expansion and excellent physical properties as well as chemical stability at elevated temperatures and are therefore regarded as promising candidates for various applications in heavily loaded turbine sections of jet engines. Liquid silicon infiltration was chosen as a technique characterized by short processing times to obtain composites with low porosity in a three-step process: infiltration of fiber preforms with a phenolic resin, pyrolysis and siliconization. Unfortunately, uncoated Tyranno SA3 fibers were cramped in the matrix, resulting in SiC/SiC with low strength and damage tolerance. In order to protect the fibers and to simultaneously provide a weak fiber matrix bonding, a CVD Si-BN/SiC/pyC fiber coating was chosen. The triple coating leads to a twofold higher bending strength of SiC/SiC as well as to more damage-tolerant fracture behavior compared to composites without fiber coating. Composites with various fiber volume contents are compared with regard to their mechanical properties. The microstructure of the composites was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and computed tomography (CT), especially with regard to the functionality of the fiber coating.
Download Full Article (PDF)
Keywords
SiC/SiC, liquid silicon infiltration, Tyranno SA3, fiber coating
References
1 Gardiner, G.: Aeroengine composites, part 1: The CMC invasion. In: Composites World, August, Gardner Business Media Inc, Cincinnati, USA, 38 – 41, (2015).
2 Fitzer, E., Fritz, W., Gadow, R.: Development of silicon carbide composites, (in German), Chem. Ing. Tech., 57, 737 – 746, (1985).
3 Corman, G.S., Luthra, K.L.: Silicon melt infiltrated ceramic composites (HiPerCompTM), In: Narottam P. Bansal: Handbook of ceramic composites. Kluwer Academic Publishers, 99 – 115, (2005).
4 Griesser, A., Pailler, R., Rebillat, F., Bruché, T., Bouillon, E., Philippe, E.: Enhanced SiC/SiC composites processed by reactive melt infiltration for high temperature applications, ECCM15, Venice, Italy, 24 – 28 June 2012
5 Brennan, J.J.: Interfacial characterization of a slurry-cast melt-infiltrated SiC/SiC ceramic-matrix composite, Acta Mater., 48, 4619 – 4628, (2000).
6 Aoki, T., Ogasawara, T., Okubo, Y., Yoshida, K., Yano, T.: Fabrication and properties of Si-Hf alloy melt-infiltrated tyranno ZMI fiber/SiC-based matrix composites, Composites: Part A, 66, 155 – 162, (2014).
7 Koch, D.: Microstructural modeling and thermomechanical properties, In: W. Krenkel: Ceramic matrix composites: Fiber reinforced ceramics and their applications. WILEY-VCH Verlag GmbH & Co.KGaA, 231 – 259, (2008).
8 He, M.Y., Hutchinson, J.W.: Kinking of a crack out of an interface, J. Appl. Mech., 56, 270 – 278, (1989).
9 Mukai, K., Yuan, Z.: Wettability of ceramics with molten silicon at temperatures ranging from 1693 to 1773 K, Mater. Trans., JIM, 41, [2], 338 – 345, (2000).
10 Mainzer, B., Roder, K., Wöckel, L., Friess, M., Koch, D., Nestler, D., Wett, D., Podlesak, H., Wagner, G., Ebert, T., Spange, S.: Development of wound SiCBNx/SiNx/SiC with near stoichiometric SiC matrix via LSI process, J. Eur. Ceram. Soc., 36, 1571 – 1580, (2016).
Copyright
Göller Verlag GmbH