Articles
All articles | Recent articles
Free Forming of Porous Ceramic Parts by Rapid Freeze Gelation (RFG)
L. Henkel, Chr. Soltmann, L. Vinke, D. Koch, G. Grathwohl
University of Bremen, Advanced Ceramics Group, Bremen, Germany
received January 24, 2011, received in revised form March 07, 2011, accepted March 19, 2011
Vol. 2, No. 2, Pages 125-132 DOI: 10.4416/JCST2011-00004
Abstract
A novel manufacturing route is presented called rapid freeze gelation (RFG) for the fabrication of silica-sol-based ceramic bodies via freeze consolidation without geometric restrictions. The layer-by-layer shaping method permits a constant freeze velocity over the entire consolidation process. Thus, ceramic parts with homogeneous microstructures can be produced and pore structures can be adjusted as intended. The final pore structure is templated by means of ice crystallization, which is controlled by the freezing conditions and the effect of freezing modifiers such as e.g. glycerol. Ceramic lattice structures are generated with a wide range of porosities up to highly porous networks. A crucial criterion for the quality of the freezing green bodies is the interfacial connection of layers. It is shown that slow freezing rates at temperatures slightly below the crystallization temperature of the suspension are favourable to ensure a strong interconnection between adjacent layers.
Download Full Article (PDF)
Keywords
Freeze gelation, rapid prototyping, porous ceramic
References
1 Deville, S.: Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues, Adv. Eng. Mater., 10, 155 – 169, (2008).
2 Lottermoser, A.: On the Freezing of Hydrosols (in German), Ber. Dtsch. Chem. Ges., 41, 3976 – 3979, (1908).
3 Peppin, S.S.L., Worster, M.G., Wettlaufer, J.S.: Morphological instability in freezing colloidal suspensions, Proc. R. Soc. A, 463 (2079), 723 – 733, (2007).
4 Peppin, S.S.L., Wettlaufer, J.S., Worster, M.G.: Experimental Verification of Morphological Instability in Freezing Aqueous Colloidal Suspensions, Phys. Rev. Lett., 100, [23], 4 S., (2008).
5 Waschkies, T., Oberacker, R., Hoffmann, M.J.: Control of Lamellae Spacing During Freeze Casting of Ceramics Using Double-Side Cooling as a Novel Processing Route, J. Am. Soc., 92, 79 – 84, (2009).
6 Araki, K., Halloran, J.W.: Porous Ceramic Bodies with Interconnected Pore Channels by a Novel Freeze Casting Technique J. Am. Ceram. Soc., 88, 1108 – 1114, (2005).
7 Statham, M.J., Hammett, E., Harris, B., Cooke, R.G., Jordan, R.M., Roche, A.: Net-Shape Manufacture of Low-Cost Ceramic Shapes by Freeze-Gelation, J. Sol-Gel Sci. Tech., 13, 171 – 175, (1998).
8 Koch, D., Andresen, L., Schmedders, T., Grathwohl, G.: Evolution of Porosity by Freeze Casting and Sintering of Sol-Gel Derived Ceramics, J. Sol-Gel Sci. Tech., 26, 149 – 152, (2003).
9 Tay, B.Y., Evans, J.R.G., Edirisinghe, M.J.: Solid freeform fabrication of ceramics, Int. Mater. Rev., 48, 341 – 370, (2003).
10 Stuecker, J.N., Cesarano III, J., Hirschfeld, D.A.: Control of the Viscous Behavior of Highly Concentrated Mullite Suspensions for Robocasting, J. Mater. Process. Tech., 142, 318 – 325, (2003).
11 Lewis, J.A.: Colloidal Processing of Ceramics, J. Am. Ceram. Soc., 83, 2341 – 59, (2000).
12 Smay, J.E., Cesarano, J., Lewis, J.A.: Colloidal Inks for Directed Assembly of 3-D Periodic Structures, Langmuir, 18, 5429 – 37, (2002).
13 Heinrich, J.G.: LSD-Based Selective Laser Sintering, cfi/Ber. DKG, 86, [10], E129 – 130, (2009).
14 Gahler, A., Heinrich, J.G., Günster, J.: Direct Laser Sintering of Al2O3–SiO2 Dental Ceramic Components by Layer-Wise Slurry Deposition, J. Am. Ceram. Soc., 89, 3076 – 80, (2006).
15 Lu, K.: Microstructural Evolution of Nanoparticle Aqueous Colloidal Suspensions during Freeze Casting, J. Am. Ceram. Soc., 90, 3753 – 58, (2007).
16 Sofie, S.W., Dogan, F.: Freeze Casting of Aqueous Alumina Slurries with Glycerol, J. Am. Ceram. Soc., 84, 1459 – 64, (2001).
17 Barg, S., de Moraes, E.G., Koch, D., Grathwohl, G.: New cellular ceramics from high alkane phase emulsified suspensions (HAPES), J. Eur. Ceram. Soc., 29, 2439 – 46, (2009).
Copyright
Göller Verlag GmbH