Articles
All articles | Recent articles
| (K0.5Na0.5)NbO3-Ba(Zn1/3Nb2/3)O3 Lead-Free Ceramics: Transmittance and Microstructure Chenwei Li, Xin Xu, Zhenlin Lu Vol. 11, No. 1, Pages 36-43 DOI: 10.4416/JCST2019-00063 Keywords: Transparent ceramics, linear transmittance, phase structure |
| 2.5Y-TZP from Yttria-Coated Pyrogenic Zirconia Nanopowder Frank Kern Vol. 1, No. 1, Pages 21-26 DOI: 10.4416/JCST2010-00005 Keywords: zirconia, nanopowder, hot-pressing, powder coating, Y-TZP |
| 2.75Yb-TZP Ceramics with High Strength and Aging Resistance F. Kern Vol. 2, No. 3, Pages 147-154 DOI: 10.4416/JCST2011-00020 Keywords: Zirconia, mechanical properties, microstructure, low-temperature degradation, ytterbia |
| 3D Focalization Microfluidic Device Built with LTCC Technology for Nanoparticle Generation using Nanoprecipitation Route H.C. Gomez, M.R. Gongora-Rubio, B.O. Agio, J. de Novais Schianti, V. Tiemi Kimura, A- Marim de Oliveira, L. Wasnievski da Silva de Luca Ramos, A.C. Seabra Vol. 6, No. 4, Pages 329-338 DOI: 10.4416/JCST2015-00062 Keywords: Nanoprecipitation, fluid flow focusing, LTCC, nanoparticles. |
| 3D Printing of Porous Al2O3 and SiC ceramics C. Polzin, D. Günther, H. Seitz Vol. 6, No. 2, Pages 141-146 DOI: 10.4416/JCST2015-00013 Keywords: Porous ceramic, alumina, silicon carbide, 3D printing, additive manufacturing. |
| 3D Printing of Zirconia Ceramic Slurry: Effect of Overlapping Rate on Surface Finish and Mechanical Properties J. Zhang, J. Zhou, J. Cai, G. Duan Vol. 12, No. 2, Pages 71-80 DOI: 10.4416/JCST2020-00020 Keywords: Zirconia ceramics, 3D printing material extrusion, filament collapse, overlap rate |
| A 10 MHz to 80 GHz Low-Temperature Cofired Ceramic Ball Grid Array Board-to-Interposer Transition for Chip Scale Packages B.A. Thrasher, W.E. McKinzie III, D.M. Nair, M.A. Smith, A. Beikmohamadi, E.D. Hughes, and J.M. Parisi Vol. 6, No. 4, Pages 279-284 DOI: 10.4416/JCST2015-00054 Keywords: LTCC, BGA interconnect, chip scale package, millimeter-wave, transition |
| A High-Temperature, Short-Duration Method of Fabricating Surrogate Fuel Microkernels for Carbide-Based TRISO Nuclear Fuels G. Vasudevamurthy, A. Radecka, C. Massey Vol. 6, No. 1, Pages 25-30 DOI: 10.4416/JCST2014-00041 Keywords: Ceramic nuclear fuel, HTGR, fabrication, actinides, fast reactor |
| A Kinetic Study of Limestone Dry Micronization in an Ultra-Centrifugal Mill with Peripheral Comminuting Path D. Radulović, D. Božović, A. Terzić, M. S. Trumić, V. Simić, L. Andrić Vol. 8, No. 2, Pages 295-304 DOI: 10.4416/JCST2017-00022 Keywords: Limestone, fillers for ceramics, mechano-chemical activation, grinding, optimization. |
| A Modelling Approach to Designing Microstructures in Thermal Barrier Coatings M. Gupta, P. Nylén, J. Wigren Vol. 4, No. 2, Pages 85-92 DOI: 10.4416/JCST2012-00044 Keywords: Thermal barrier coatings, yttria-stabilised zirconia, OOF, microstructure, thermo-mechanical properties |
| A New Bioactive Glass Composition for Bioceramic Scaffolds Devis Bellucci, Valeria Cannillo, Antonella Sola Vol. 1, No. 1, Pages 33-40 DOI: 10.4416/JCST2010-00008 Keywords: bioceramics, porous materials, scaffolds, glass-ceramics. |
| A Polishing-Free Etching Method for Microstructure Observation of Fine-Grained Ceramics M. Liu, M. Liu, M. Liu, J. Zhao, S. Shimai, J. Zhang, J. Zhang, J. Zhang, H. Chen, H. Chen, H. Chen, D. Han, J. Liu, S. Wang, S. Wang Vol. 12, No. 1, Pages 59-62 DOI: 10.4416/JCST2020-00024 Keywords: Fracture surface, ceramics, etching, SEM |
| A Review of Particle- and Fiber-Reinforced Metakaolin-Based Geopolymer Composites R.A. Sá Ribeiro, R.A. Sá Ribeiro, M.G. Sá Ribeiro, W.M. Kriven Vol. 8, No. 3, Pages 307-322 DOI: 10.4416/JCST2017-00048 Keywords: Geopolymer, metakaolin, particle composite, fiber composite, kaolin |
| A Study of a Surrogate Nuclear Thermal Propulsion Fuel Element D.S. Tucker, A. Preston, N. Jered, A. Cunningham Pages 1-6 DOI: 10.4416/JCST2023-00001 Keywords: Carbide, nitride, spark plasma sintering, X-ray diffraction, propulsion fuel element |
| A Study on the Polymer Precursor Formation and Microstructure Evolution of Square-Shaped (La0.5Ba0.5)(Mn0.5Fe0.5)O3 Ceramic Nanoparticles M. Romero, M. Romero, H. Pardo, H. Pardo, R. Faccio, R. Faccio, L. Suescun, L. Suescun, S. Vázquez, I. Laborda, L. Fernández-Werner, L. Fernández-Werner, Á. Acosta, J. Castiglioni, Á.W. Mombrú, Á.W. Mombrú Vol. 6, No. 3, Pages 221-230 DOI: 10.4416/JCST2015-00005 Keywords: SAXS, perovskite, nanoparticle, sol-gel, polymer precursor. |
| Ablation-Resistant Composite Coating of HfC-TaC-SiC for C/C Composites Deposited by Supersonic Atmospheric Plasma Spraying Y. Yang, K. Li, G. Liu, Z. Zhao Vol. 7, No. 4, Pages 379-386 DOI: 10.4416/JCST2016-00050 Keywords: Carbon/carbon composites, supersonic atmospheric plasma spraying, multiphase coating, ablation resistance |
| Additive Manufacturing of Bioactive Glasses and Silicate Bioceramics R. Gmeiner, U. Deisinger, J. Schönherr, B. Lechner, R. Detsch, A. R. Boccaccini, J. Stampfl Vol. 6, No. 2, Pages 75-86 DOI: 10.4416/JCST2015-00001 Keywords: Additive manufacturing, bioactive glasses, silicate bioceramics, scaffolds |
| Additive Manufacturing of Ceramics: A Review J. Deckers, J. Vleugels, J.-P. Kruth Vol. 5, No. 4, Pages 245-260 DOI: 10.4416/JCST2014-00032 Keywords: Additive manufacturing, ceramics, selective laser sintering®, selective laser melting, stereolithography |
| Additive Manufacturing of Metal-Ceramic-Composites by Thermoplastic 3D-Printing (3DTP) U. Scheithauer, T. Slawik, E. Schwarzer , H.-J. Richter, T. Moritz, A. Michaelis Vol. 6, No. 2, Pages 125-132 DOI: 10.4416/JCST2014-00045 Keywords: Additive manufacturing, metal-ceramic, thermoplastic, shrinkage, co-sintering |
| Additive Manufacturing to Produce Complex 3D Ceramic Parts T. Chartier, C. Dupas, M. Lasgorceix, J. Brie, , N. Delhote, Chr. Chaput Vol. 6, No. 2, Pages 95-104 DOI: 10.4416/JCST2014-00040 Keywords: Shaping, additive manufacturing, photopolymerization, stereolithography |
| Additive Manufacturing: Controllable Fabrication for Integrated Micro and Macro Structures X. Tian, D. Li, B. Lu Vol. 5, No. 4, Pages 261-268 DOI: 10.4416/JCST2014-00044 Keywords: Additive manufacturing, rapid prototyping, stereolithography |
| Ageing Behavior of Injection-Molded ZTA Ceramics as a Function of Stabilizer Content M. Abou el Ezz, F. Kern, R. Gadow Vol. 2, No. 4, Pages 191-196 DOI: 10.4416/JCST2011-00025 Keywords: ZTA, ceramic injection molding, ageing behavior, mechanical properties |
| Alkali-Activated Materials Based on Callovo-Oxfordian Argillite: Formation, Structure and Mechanical Properties C. Dupuy, C. Dupuy, A. Gharzouni, N. Texier-Mandoki, X. Bourbon, S. Rossignol Vol. 9, No. 2, Pages 127-140 DOI: 10.4416/JCST2017-00086 Keywords: Callovo-Oxfordian, argillite, alkali-activated, heat treatment, carbonate, calcium |
| Alumina-Doped 2.5Y-TZP produced from Yttria-Coated pyrogenic Nanopowder F. Kern Vol. 2, No. 2, Pages 89-96 DOI: 10.4416/JCST2011-00001 Keywords: Zirconia, hot pressing, mechanical properties, microstructure, low-temperature degradation, phase analysis |
| An Overview of the Aerosol Deposition Method: Process Fundamentals and New Trends in Materials Applications D. Hanft, J. Exner, M. Schubert, T. Stöcker, P. Fuierer, R. Moos Vol. 6, No. 3, Pages 147-182 DOI: 10.4416/JCST2015-00018 Keywords: Dense ceramic films, room temperature impact consolidation (RTIC), vacuum cold spray (VCS), vacuum kinetic spraying (VKS), gas deposition. |
| An Overview of the Functional Ceramic and Composite Materials for Microbiological Fuel Cells A.S. Galushko, A.G. Ivanova, M.S. Masalovich, O.A. Zagrebelnyy, G.G. Panova, I.Yu. Kruchinina, I.Yu. Kruchinina, O.A. Shilova, O.A. Shilova Vol. 8, No. 4, Pages 433-454 DOI: 10.4416/JCST2017-00041 Keywords: Microbiological fuel cells, bioelectrogenesis, ceramic and composite anode materials, ceramic and composite cathode materials, ceramic and composite separating membrane |
| Anisotropic Fracture Toughness and Microstructure of Graphene-Reinforced TiC/Si3N4 Composite Y. Zhang, Y. Zhang, G. Xiao, G. Xiao, C. Xu, C. Xu, M. Yi, M. Yi, X. Meng, X. Meng Vol. 7, No. 4, Pages 323-328 DOI: 10.4416/JCST2016-00032 Keywords: Graphene, orientation, fracture toughness, microstructure |
| Annealing Temperature Effects on Structural and Hydrophilic Properties of Magnesium-Doped TiO2 Thin Films M. Kumar, A. K. Gupta, D. Kumar Vol. 7, No. 4, Pages 463-468 DOI: 10.4416/JCST2016-00041 Keywords: TiO2 thin films, Mg-doping, annealing, surface modification, hydrophilicity. |
| Antioxidant Coating Composed of SiC on Carbon Fibers by Chemical Vapor Reaction J. Hao, J. Hao, J. Li, J. Li, W. Shi, W. Shi, W. Shi, Y. Tan, Y. Tan, X. Ding Vol. 9, No. 4, Pages 465-470 DOI: 10.4416/JCST2018-00033 Keywords: Carbon fibers, SiC, coating, oxidation behavior |
| Avoiding Thermal-Stress-Induced Failures by Design Optimization when Brazing Perlucor® to Inconel® 718 Components L. Spatafora, J. Isele, H.-J. Ritzhaupt-Kleissl, V. Hagenmeyer, J. Aktaa Vol. 10, No. 2, Pages 1-10 DOI: 10.4416/JCST2019-00011 Keywords: Metal-ceramic-joint, residual stress calculation, failure probability, active brazing |
| Biocompatibility of Hydroxyapatite-Alumina and Hydroxyapatite-Zirconia Composites including Commercial Inert Glass (CIG) as a Ternary Component B. Bulut, Z.E. Erkmen, E.S. Kayali Vol. 7, No. 3, Pages 263-276 DOI: 10.4416/JCST2016-00011 Keywords: Hydroxyapatite, ceramics, composites, microstructure, mechanical properties, biocompatibility |
| Bioinorganics in Bioactive Calcium Silicate Ceramics for Bone Tissue Repair: Bioactivity and Biological Properties H. Mohammadi, M. Hafezi, N. Nezafati, S. Heasarki, A. Nadernezhad, S. M. H. Ghazanfari, M. Sepantafar Vol. 5, No. 1, Pages 1-12 DOI: 10.4416/JCST2013-00027 Keywords: Keywords: Calcium silicate, chemical stability, ion doping |
| Boronhydride-Geopolymer Composites C.H. Rüscher Vol. 8, No. 3, Pages 399-410 DOI: 10.4416/JCST2017-00051 Keywords: Hydrogen storage, AB-geopolymer, SB-geopolymer |
| Carbon-Bonded Alumina Refractories with Reduced Carbon Content due to the Addition of Semi-Conductive Silicon and/or Nanoparticles N. Brachhold, J. Fruhstorfer, A. Mertke, C.G. Aneziris Vol. 7, No. 2, Pages 209-222 DOI: 10.4416/JCST2016-00024 Keywords: Nanoscaled additives, silicon, carbon-bonded alumina, semi-conductive material, reduced graphite |
| Characterisation of SiCN Coatings on Substrates of Hf and Nb C. Delpero, W. Krenkel, G. Motz Vol. 4, No. 2, Pages 105-112 DOI: 10.4416/JCST2012-00041 Keywords: Precursor-derived ceramics, FGM, transition metals, composites, SiCN |
| Characteristics and Sintering Behavior of (Hf-Ta-Ti-Zr-Nb)C High-Entropy Carbides Fabricated by High-Energy Ball Milling and Spark Plasma Sintering J. Song, L.V. Duong, Ph.V. Trinh, N.N. Linh, D.D. Phuong, J. Seok, J. Seok, S.-Y. Kim, S.-Y. Kim, J. Han, H. Kim Vol. 14, No. 1, Pages 17-24 DOI: 10.4416/JCST2022-00008 Keywords: High-entropy carbide, ultra-high-energy ball milling, spark plasma sintering |
| Characteristics of Micro-Gold-Particle/Glass-Ceramic Composite from Post-Sintering Thermal Treatment W. Yi, X. Sun, D. Niu, X. Hu Vol. 5, No. 1, Pages 45-50 DOI: 10.4416/JCST2013-00038 Keywords: Gold particle, glass-ceramic, interface, thermal treatment, chemical reactions |
| Characterization of Mechanical Properties under Shear Load of a Short-Carbon-Fiber-Reinforced C/SiC Ceramic Y. Shi, K. Tushtev, D. Koch Vol. 6, No. 3, Pages 183-190 DOI: 10.4416/JCST2014-00051 Keywords: Short-carbon-fiber C/SiC, mechanical properties under shear load, Iosipescu shear test, Asymmetric-Four-Point-Bend shear test, FEM |
| Chemical Degradation of Screen-Printed Thick Films on LTCC Nils Junker, Thomas J. Rabbow, Michael Schneider, Jochen Schilm, Alexander Michaelis Vol. 5, No. 3, Pages 209-216 DOI: 10.4416/JCST2014-00009 Keywords: LTCC, thick film, degradation, chemical durability |
| Circuit-Board-Integrated TransformersDesign and Manufacture R. Matz, T. Rabe, J. Töpfer, S. Ziesche Vol. 11, No. 1, Pages 44-61 DOI: 10.4416/JCST2019-00071 Keywords: Multilayer ceramic technology, LTCC, transformer |
| Co-Precipitation Synthesis of La2O2SO4:Tb3+ Phosphor and its Conversion to La2O2S:Tb3+ Ceramic Scintillator via Pressureless Sintering in Hydrogen G.X. Xu, J.B. Lian, N.C. Wu, X. Zhang, J. He Vol. 9, No. 3, Pages 345-352 DOI: 10.4416/JCST2018-00018 Keywords: Lanthanum compounds, co-precipitation, pressureless sintering, photoluminescence, ceramic scintillator |
| CO2-Laser-Assisted Surface Modification of Titanium Alloys for Biomedical Applications S. Gräf, F. A. Müller Vol. 5, No. 4, Pages 281-286 DOI: 10.4416/JCST2014-00022 Keywords: CO2-laser surface structuring, titanium alloy, bioactivation, laser sintering, hydroxyapatite |
| Colloidal Processing and CO2-Capture Performance Al2O3-Zeolite 13X Composites L. Andersson, F. Akhtar, A. Ojuva, L. Bergström Vol. 3, No. 1, Pages 9-16 DOI: 10.4416/JCST2012-00039 Keywords: CO2-uptake, adsorption, colloids, alumina, macroporous |
| Contacting Methods for C12A7 Electride Ceramic K. Waetzig, A. Rost, J. Schilm, M. Tajmar, A. Michaelis Vol. 11, No. 1, Pages 11-16 DOI: 10.4416/JCST2019-00032 Keywords: Electron emitter, conductive ceramic, C12A7, calcium aluminate, metallization, contacting |
| Contributions to Dielectric Constant Enhancement in Thin-Film Metal-Insulator-Metal D.S. Krueger, Z.J. Legenzoff, J.A. Wolf, J.B. Claypool, R.W. Schwartz, W. Huebner Vol. 13, No. 1, Pages 1-8 DOI: 10.4416/JCST2021-00001 Keywords: Thin film capacitor, fringe field capacitance, dielectric enhancement |
| Control of Polycondensation Reaction Generated from Different Metakaolins and Alkaline Solutions A. Gharzouni, A. Gharzouni, I. Sobrados, E. Joussein, S. Baklouti, S. Rossignol Vol. 8, No. 3, Pages 365-376 DOI: 10.4416/JCST2017-00040 Keywords: Metakaolin, alkaline solution, kinetics, oligomer formation, 27Al NMR |
| Controlled Preparation of Red-Light-Emitting (Y0.95Eu0.05)2O3 Phosphors and Vacuum Sintering of Transparent (Y0.95Eu0.05)2O3 Ceramics B. Lu, B. Lu, B. Lu, H.M. Cheng, H.M. Cheng, H.M. Cheng, Z.G. Sun, L. Wang, J.G. Pan, J.G. Pan, J.G. Pan, H.B. Chen, H.B. Chen, H.B. Chen Vol. 9, No. 1, Pages 53-60 DOI: 10.4416/JCST2017-00066 Keywords: Transparent ceramics, phosphor, yttria, optical property, Eu3+ doping |
| Corrigendum to “Evaluation of Rheological and Thermal Behavior of Ceramic Materials during Liquid Phase Sintering with Numerical-Experimental Procedure” H. Yaghoubi, E. Salahi, F. Taati Vol. 9, No. 1, Pages 99-100 DOI: 10.4416/JCST2017-00019-CORR Keywords: |
| Corrigendum to “Relationship of Optical Properties and Elastoplastic Characteristics of Transparent Spark-Plasma-Sintered YSZ Ceramics” [J. Ceram. Sci. Technol. 08 [01] 161-168 (2017)] O. L. Khasanov, E. S. Dvilis, Z. G. Bikbaeva, V. D. Paygin, A. O. Khasanov Vol. 8, No. 2, Pages 305-306 DOI: 10.4416/JCST2016-00105-CORR Keywords: |
| Crack Detection of Ceramics based on Laser Speckle Photometry B. Bendjus, U. Cikalova, L. Chen Vol. 8, No. 1, Pages 73-80 DOI: 10.4416/JCST2016-00090 Keywords: Ceramics, speckles, micro-crack detection, non-destructive optical testing |
| Crack Formation and Shape of Fracture Surface in Tabular-Alumina-Based Castables with Addition of Specific Aggregates J. Schnieder, L. Lynen, N. Traon, T. Tonnesen, R. Telle Vol. 5, No. 2, Pages 131-136 DOI: 10.4416/JCST2013-00039 Keywords: Refractories, microstructure analysis, eutectic aggregates, thermal shock |
| Crystal Structure, Raman Spectra and Dielectric Properties of Ca0.66Ti0.66La0.34Al0.34O3 Microwave Ceramics with Nd3+Additions Y. Xu, R. Fu, Y. Yang, J. Cai, X. Gu, J. Fang Vol. 7, No. 3, Pages 257-262 DOI: 10.4416/JCST2016-00001 Keywords: Ca0.66Ti0.66La0.34Al0.34O3, microwave dielectric properties, structure, additives |
| Crystallization Behavior, Microstructure and Magnetic Properties of B2O3-SiO2-Fe2O3-BaO-SrO Glass-Ceramics M. Tavoosi, A. Ghasemi, D. Yousefi Vol. 7, No. 4, Pages 469-476 DOI: 10.4416/JCST2016-00063 Keywords: Glass-ceramics, crystallization, magnetic materials, hexaferrite. |
| S.V. Dorozhkin Vol. 9, No. 4, Pages 353-370 DOI: 10.4416/JCST2018-00026 Keywords: Bioceramics, biomaterials, grafts, biomedical applications, tissue engineering |
| Data-Driven Innovations in Joint Replacement: Do Ceramic Femoral Heads Contribute to Polyethylene Oxidation? B.J. McEntire, L. Puppulin, B.S. Bal, B.S. Bal, G. Pezzotti Vol. 8, No. 1, Pages 1-6 DOI: 10.4416/JCST2016-00100 Keywords: ZTA, silicon nitride, polyethylene, spectroscopy, hip arthroplasty |
| Deep Drawing of Ceramic Green Tapes – A Promising Technology for Producing New Lightweight Non-Planar Kiln Furniture E. Schwarzer, U. Scheithauer, M. Brosche, H.-J. Richter, T. Moritz Vol. 8, No. 1, Pages 169-176 DOI: 10.4416/JCST2016-00106 Keywords: Structural ceramic, tape casting, shaping, forming, deep drawing |
| Degradation of Sealing Glasses for SOFC under Electrical Load and Dual Atmosphere A. Rost, J. Schilm, M. Kusnezoff, A. Michaelis Vol. 3, No. 2, Pages 69-80 DOI: 10.4416/JCST2012-00002 Keywords: Crystallization, degradation, sanbornite, sealing glasses, SOFC |
| Dense Yttria Film Deposited on a Plasma-Sprayed Al2O3 Coating by Aerosol Deposition B.-K. Lee, J.-H. Jung, B.-D. Hahn, W.-H. Yoon, D.-S. Park, J.-J. Choi, J. Ryu, J.-W. Kim, C. Ahn, K.-M. Song Vol. 2, No. 4, Pages 197-202 DOI: 10.4416/JCST2011-00026 Keywords: Yttria film, alumina, surface roughness, grit blasting, aerosol deposition |
| Densification Behavior and Mechanical Properties of Niobium-Oxide-Doped Alumina Ceramics A.M. Hassan, M. Awaad, F. Bondioli, S.M. Naga Vol. 5, No. 1, Pages 51-56 DOI: 10.4416/JCST2013-00045 Keywords: Doping, alumina, niobia, microstructure, mechanical properties |
| Densification of Mn-Doped YSZ for the Solid Oxide Membrane Process and its Surface Corrosion under Fluoride Salt J. Kanghee, K. Buyoung, R. Jiseung, K. Hyeong-Tae, L. Heesoo Vol. 11, No. 2, Pages 91-98 DOI: 10.4416/JCST2020-00010 Keywords: Mn-doped YSZ, sinterability, polarization resistance, fluoride salt, surface corrosion, destabilization |
| Dependent Thermo-Mechanical Behavior of Novel Alumina-Based Refractories A. Böhm, C.G. Aneziris, J. Malzbender Vol. 5, No. 2, Pages 167-171 DOI: 10.4416/JCST2014-00001 Keywords: Refractories, ceramics, elastic modulus, fracture, thermal shock |
| Design and Additive Manufacturing of Periodic Ceramic Architectures G. Bianchi, S. Gianella, A. Ortona Vol. 8, No. 1, Pages 59-66 DOI: 10.4416/JCST2016-00088 Keywords: Additive manufacturing, cellular ceramics, high-temperature applications, periodic architectures |
| Design and Experiment of a 3D Printing System for Ceramics by Continuous Extrusion Y. CHAO, X. LIU Vol. 10, No. 2, Pages 1-10 DOI: 10.4416/JCST2019-00048 Keywords: 3D ceramic printing, continuous extrusion, nozzle extrusion device, bonding quality. |
| Design, Fabrication and Characterization of Heat Spreaders in Low-Temperature Co-Fired Ceramic (LTCC) utilizing Thick Silver Tape in the Co-Fire Process T. Welker, S. Günschmann, N. Gutzeit, J. Müller Vol. 6, No. 4, Pages 301-304 DOI: 10.4416/JCST2015-00042 Keywords: LTCC, thermal management, thick silver tape, heat spreader |
| Determination of Elastic Properties for a Wound Oxide Ceramic Composite Y. Shi, S. Hofmann, R. Jemmali, S. Hackemann , D. Koch Vol. 5, No. 1, Pages 31-38 DOI: 10.4416/JCST2013-00028 Keywords: Ceramic matrix composite, fibre orientation, elastic properties, inverse laminate theory, equivalent unidirectional layer |
| Development of a Miniaturized Ceramic Differential Calorimeter Device in LTCC Technology J. Kita, W. Missal, E. Wappler, F. Bechtold, R. Moos Vol. 4, No. 3, Pages 137-144 DOI: 10.4416/JCST2013-00008 Keywords: DSC, LTCC, differential scanning calorimetry |
| Development of a Novel Sensor-Actuator-Module with Ceramic Multilayer Technology Markus Flössel, Sylvia Gebhardt, Andreas Schönecker, Alexander Michaelis Vol. 1, No. 1, Pages 55-58 DOI: 10.4416/JCST2010-00010 Keywords: LTCC, PZT, sensor, actuator, multilayer technology, aluminium die casting |
| Development of Damage-Tolerant Ceramic Matrix Composites (SiC/SiC) using Si-BN/SiC/pyC Fiber Coatings and LSI Processing B. Mainzer, R. Jemmali, P. Watermeyer, K. Kelm, M. Frieß, D. Koch Vol. 8, No. 1, Pages 113-120 DOI: 10.4416/JCST2016-00095 Keywords: SiC/SiC, liquid silicon infiltration, Tyranno SA3, fiber coating |
| Development of Novel ZnO-Doped Hydroxyapatite Polycarboxylate Dental Cement Y. E. Greish, S. H. Kenawy, S. I. Habib, T. A. Moussa, H. A. Shalaby, M. El Deftar Vol. 2, No. 4, Pages 227-236 DOI: 10.4416/JCST2011-00022 Keywords: Hydroxyapatite, dental cement, polycarboxylate, in vitro performance, stem cells |
| Dielectric Properties of Gel-Calcined Cd-Zn Oxide Nanocomposites A. De, S. Kundu Vol. 8, No. 4, Pages 463-470 DOI: 10.4416/JCST2017-00008 Keywords: Sol-gel, nanocomposite, dielectric properties |
| Droplet-Based Additive Manufacturing of Hard Metal Components by Thermoplastic 3D Printing (T3DP) U. Scheithauer, J. Pötschke, S. Weingarten, E. Schwarzer, A. Vornberger, T. Moritz, A. Michaelis Vol. 8, No. 1, Pages 155-160 DOI: 10.4416/JCST2016-00104 Keywords: Additive Manufacturing, Thermoplastic 3D printing, hard metal, cemented carbide, WC-Co |
| Effect of In Situ-Formed Cerium Hexaaluminate Precipitates on Properties of Alumina -24 Vol% Zirconia (1.4Y) Composites F. Kern Vol. 4, No. 4, Pages 177-186 DOI: 10.4416/JCST2013-00014 Keywords: Alumina, zirconia, platelets, mechanical properties, microstructure |
| Effect of Al2O3 Doping on Damping Properties of YSZ Coatings G.Y. Du, Y.T. Liu, G.H. Li, Y.S. Ni, X.Y. Liang, Z.L. Chen Vol. 13, No. 2, Pages 107-112 DOI: 10.4416/JCST2022-00005 Keywords: Al-YSZ, damping, doping property, damping performance, microstructure |
| Effect of Alkali Concentration and Reaction Time on the Morphology of ZnO Nano-Microparticles Prepared by Hydrothermal Method A. M. EL-Rafei, M. F. Zawrah Vol. 5, No. 3, Pages 193-198 DOI: 10.4416/JCST2014-00002 Keywords: Chemical synthesis, ZnO, nanostructures, x-ray diffraction, SEM |
| Effect of Alumina Substitution on Porosity and Thermal Expansion of Triaxial Porcelain-Like Bodies M. Ghaffari, E. Salahi, A. Rajabi Vol. 5, No. 4, Pages 287-292 DOI: 10.4416/JCST2014-00021 Keywords: Triaxial bodies, thermal expansion, porosity |
| Effect of Alumina-Coated Graphite (ACG) on the Microstructure and Mechanical Properties of Al2O3-C Refractories X. Xu, Y. Li, Q. Wang, S. Sang, L. Pan Vol. 8, No. 4, Pages 455-462 DOI: 10.4416/JCST2016-00079 Keywords: Alumina-coated graphite, expanded graphite, microstructure, mechanical properties |
| Effect of Alumina/Iron Catalysts on the Formation of Carbon Nanotubes Xiaoxue Zhang, Juha-Pekka Nikkanen, Jyri Rintala, Mika Pettersson, Tomi Kanerva, Jarmo Laakso, Erkki Levänen, Tapio Mäntylä Vol. 1, No. 1, Pages 51-54 DOI: 10.4416/JCST2010-00013 Keywords: carbon nanotubes, alumina, sol-gel method, chemical catalytic vapour deposition |
| Effect of B2O3 on the Structure and Electrical Properties of High-Temperature Sealing Glass X. Xi, Z. Wang, S. Xu, S. Hua, Q. Feng, W. Liu Pages 1-8 DOI: 10.4416/JCST2023-00005 Keywords: B2O3, sealing glass, high-temperature, electrical properties |
| Effect of Calcination Temperature on the Structural and Electrical Properties of Low-Temperature-Sintered (Na0.52K0.44Li0.04)(Nb0.88Sb0.08Ta0.04)O3 Ceramics D.Y. Lv, Z. Liu, W.W. Jin, Z. Ye, F. Hua, K. Wu Vol. 11, No. 2, Pages 99-102 DOI: 10.4416/JCST2020_00011 Keywords: Lead-free piezoelectric ceramics, low-temperature sintering, calcination, electrical properties |
| Effect of CdO Addition on Microwave Dielectric Properties of BaxSr1-xTiO3 Ceramics Doaa A. Abdel Aziz, Wagdy N. Nour, Aisha E. Reda, Eglal R. Souya Vol. 1, No. 1, Pages 41-50 DOI: 10.4416/JCST2010-00001 Keywords: microwave, dielectric properties, microstructure, SrO, BaO, TiO2 and CdO |
| Effect of Chemical Interaction on Texture Development in Bi4Ti3O12 using SrBi4Ti4O15 and SrBi8Ti7O27 Hetero-Templates K. Onodera, T. Kimura Vol. 3, No. 3, Pages 131-140 DOI: 10.4416/JCST2012-00022 Keywords: Texture development, microstructure development, templated grain growth, bismuth titanate, strontium bismuth titanate |
| Effect of Co Co-Doping on the Electrical Conductivity of Ce0.9Sm0.1O2-δ M.J. Pawar, S.S. Chaure, S.B. Deshmukh Vol. 1, No. 1, Pages 27-31 DOI: 10.4416/JCST2010-00006 Keywords: SOFC; ceria; EDTA-glycol method; co-dopant; solid electrolytes |
| Effect of Different Acid Treatments on the Shear Bond Strength of Computer-Aided Design and Manufacturing (CAD-CAM) Ceramics for Dental Applications G. Yildirim Vol. 9, No. 4, Pages 391-396 DOI: 10.4416/JCST2018-00031 Keywords: Shear bond strength, CAD-CAM ceramics, resin cement. |
| Effect of Electrospun Alumina Nanofibers Incorporation in Ceramic Glaze E. Carneiro, P. Sá, B. Almeida, C. A. Pinto, , J. P. Mendonça, S. Carvalho Vol. 6, No. 1, Pages 69-74 DOI: 10.4416/JCST2014-00042 Keywords: Electrospinning, nanofibers, alumina, ceramic, glaze. |
| Effect of Heat Treatment on Grain Growth of Nanocrystalline Hydroxyapatite Powder I. Mobasherpour, E. Salahi Vol. 2, No. 2, Pages 119-124 DOI: 10.4416/JCST2010-00046 Keywords: Hydroxyapatite, nanostructures, crystal growth, electron microscopy, X-ray diffraction |
| Effect of interface oxidation on matrix multi-cracking evolution of fiber-reinforced ceramic-matrix composites at elevated temperature L. Li Vol. 9, No. 4, Pages 397-410 DOI: 10.4416/JCST2018-00032 Keywords: Ceramic-matrix composites (CMCs), matrix multi-cracking, interface oxidation |
| Effect of Laser Power on Yield of TiO2 Nanoparticles Synthesized by Pulsed Laser Ablation in Water A. Singh, J. Vihinen, E. Frankberg, L. Hyvärinen, M. Honkanen, E. Levänen Vol. 8, No. 1, Pages 39-44 DOI: 10.4416/JCST2016-00071 Keywords: Nanoparticles, synthesis yield, pulsed laser ablation in liquids, WAXS, laser fluence |
| Effect of Mechanical Milling and Sintering Parameters on the Mechanical Properties of SiC-ZrO2 L. Anggraini, R. Yamamoto, H. Fujiwara, K. Ameyama Vol. 2, No. 3, Pages 139-146 DOI: 10.4416/JCST2011-00017 Keywords: Mechanical milling, spark plasma sintering, SiC-ZrO2, microstructure, mechanical properties |
| Effect of Multiple loading sequence on in-phase thermomechanical fatigue hysteresis of silicon carbide fiber-reinforced ceramic-matrix composites L. Li Vol. 9, No. 2, Pages 163-174 DOI: 10.4416/JCST2017-00095 Keywords: Ceramic-matrix composites (CMCs), thermomechanical fatigue, hysteresis loops, multiple loading sequence |
| Effect of Nb Doping on Crystalline Orientation, Electric and Fatigue Properties of PZT Thin Films Prepared by Sol-Gel Process Q. Li, X. Wang, F. Wang, J. Dou, W. Xu, H. Zou Vol. 8, No. 4, Pages 519-524 DOI: 10.4416/JCST2017-00031 Keywords: PNZT thin films, (100) preferred orientation, microstructure, fatigue resistance, sol-gel process |
| Effect of Particle Size on the Blue Chromate Pigment CoAl2O4 Y. Wang, Q. Wang, Q. Chang, S. Hu, X. Wang, K. Yang Vol. 9, No. 1, Pages 43-46 DOI: 10.4416/JCST2017-00060 Keywords: Inkjet printing, pigment, CoAl2O4, particle size, chromate |
| Effect of Repeated Firing on the Resistance of Screen-Printed Thick-Film Conductors D. Ortolino, A. Engelbrecht, H. Lauterbach, M. Bräu, J. Kita, R. Moos Vol. 5, No. 4, Pages 317-326 DOI: 10.4416/JCST2014-00029 Keywords: Thick-film, screen-printing, conductor, gold, silver, silver-palladium, silver-platinum, resistance, TCR, temperature cycling, firing, sintering, material diffusion |
| Effect of Submicron-Carbon-Containing MgO-C Refractories on Carbon Pickup of Ultra-Low Carbon Steel Y. Liu, Y. Liu, L. Wang, G. Li, G. Li, G. Li, Z. Zhang, X. Xu, Y. Li, J. Chen Vol. 9, No. 2, Pages 141-148 DOI: 10.4416/JCST2017-00087 Keywords: Submicron carbon, MgO-C refractories, carbon pickup, penetration, spalling resistance |
| Effect of Temperature Path on the Poling of Commercial Hard PZT Ceramics and its Implication for Mass Production S. Esslinger, P. Neumeister, A. Schönecker Vol. 4, No. 4, Pages 213-216 DOI: 10.4416/JCST2013-00018 Keywords: Piezoceramic, hard PZT, polarization, serial production |
| Effect of the Addition of Ultrafine Powders on the Microstructure and Mechanical Properties of TiCN-Based Cermets Y. Yang, Y. Yang, W. Dang, W. Dang, J. Liu, J. Liu, H. Zhang, H. Zhang, S. Gu, S. Gu, C. Lei, C. Lei, Y. Chen, Y. Chen Vol. 13, No. 1, Pages 15-22 DOI: 10.4416/JCST2021-00011 Keywords: Ultrafine TiCN powders, cermets, microstructure, mechanical properties |
| Effect of the Evolution of Rheological Behavior over Deagglomeration Time on Optical Transparency of Polycrystalline Alumina Ceramics A. Rahimian, M. Torki, S. Ghazanfari, B. Movahedi, R. Emadi Vol. 10, No. 2, Pages 1-8 DOI: 10.4416/JCST2019-00047 Keywords: Optical materials, sintering, optical properties, ball milling. |
| Effect of X (X = Al3+, V3+, Sc3+, In3+ and Y3+) Doping on the Dielectric Properties of Lead-Free BZT Ceramics Zhang Kaituo, Xu Yuan, Xu Yuan, Xu Yuan, Fu Lei, Chen Ligui, Jia Shikui Vol. 12, No. 1, Pages 29-36 DOI: 10.4416/JCST2020-00026 Keywords: Doped ionic radius, BZT, Curie-Weiss law, dielectric |
| Effect of Y2O3, La2O3 and MgO Co-Doping on Densification, Microstructure and Properties of AlON Ceramics J. Zhang, J. Lei, J. Lei, Y. Shi, J. Xie, F. Lei, L. Zhang Vol. 8, No. 1, Pages 177-182 DOI: 10.4416/JCST2016-00114 Keywords: Transparent γ-AlON ceramics, pressureless sintering, co-doping |
| Effect of ZrO2 Doping on Strength and Toughness of Mo2NiB2-Based Cermets W. Li, Z. Fan, T. Ai, H. Dong, P. Jiang, X. Zou Vol. 12, No. 2, Pages 115-124 DOI: 10.4416/JCST2021-00012 Keywords: Mo2NiB2-based cermets, flexural strength, fracture toughness, strengthening and toughening mechanism |
| Effects of In-Situ-Formed 9Al2O3·2B2O3 on the Corrosion Resistance of Al2O3-Based Porous Ceramic in Molten Aluminum R. Xiang, Y. Li, D. Xiang, N. Li, S. Li, Y. Li, S. Sang Vol. 7, No. 1, Pages 113-118 DOI: 10.4416/JCST2015-00037 Keywords: Porous ceramic, in-situ synthesization, 9Al2O3·2B2O3, molten aluminum, corrosion resistance |
| Effects of Aging Time on Microstructure, Hydrophobic and Optical Properties of BiFeO3 Thin Films Synthesized via Sol-Gel Method H. Baqiah, Z.A. Talib, A.H. Shaari, M. M. Awang Kechik, J.Y.C. Liew, N.B. Ibrahim Vol. 9, No. 4, Pages 419-426 DOI: 10.4416/JCST2018-00039 Keywords: BiFeO3 films, wettability, aging time, roughness, band gap |
| Effects of Annealing Temperature on Infrared Spectra of SiO2 Extracted From Rice Husk M. H. Shahrokh Abadi, A. Delbari, Z. Fakoor, J. Baedi Vol. 6, No. 1, Pages 41-46 DOI: 10.4416/JCST2014-00028 Keywords: FTIR, transmittance, SiO2, rice husk, bond structure, stretching, bending, rocking. |
| Effects of Copper Oxide Content in AgCuO Braze Alloy on Microstructure and Mechanical Properties of Reactive-Air-Brazed Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) A. Kaletsch, A. Bezold, E.M. Pfaff, C. Broeckmann Vol. 3, No. 2, Pages 95-104 DOI: 10.4416/JCST2012-00001 Keywords: RAB, reactive air brazing, perovskite, BSCF, CuO |
| Effects of Growth Rate on Microstructure and Properties of Directionally Solidified Eutectic Ceramic Al2O3/MgAl2O4/ZrO2 Z. Chu, Z. Chu, S. Wang, S. Wang, J. Liu, J. Liu, J. Wang, J. Wang Vol. 9, No. 1, Pages 61-68 DOI: 10.4416/JCST2017-00076 Keywords: Al2O3/MgAl2O4/ZrO2, eutectic oxide ceramic, growth rate, induction zone melting, microstructure, fracture toughness |
| Effects of Micro-Damage on the Nonlinear Constitutive Behavior of SiC/SiC Minicomposites S. Zhang, S. Zhang, X. Gao, X. Gao, J. Chen, J. Chen, H. Dong, H. Dong, Y. Song, Y. Song, Y. Song, H. Zhang Vol. 7, No. 4, Pages 341-348 DOI: 10.4416/JCST2016-00040 Keywords: Ceramic matrix composites, nonlinearity, micro-damage, matrix cracks, in-situ mechanical testing |
| Effects of NH4VO3 on Properties and Structures of Cordierite Ceramics W. Ning, Z. Tang, Z. Han, S. Ding, C. Xu, P. Zhang Vol. 9, No. 1, Pages 47-52 DOI: 10.4416/JCST2017-00063 Keywords: NH4VO3, cordierite, thermal expansion, structure |
| Effects of Sintering Time on Microstructure and Properties of Alumina Foam Ceramics Z. Chu, Z. Chu, C. Jia, C. Jia, J. Liu, J. Liu, R. Ding, R. Ding, G. Yuan Vol. 8, No. 4, Pages 499-504 DOI: 10.4416/JCST2017-00028 Keywords: Foam ceramics, alumina fibers, microstructure, compressive strength |
| Effects of Stabilizer Content and Sintering Conditions on Y-TZP Ceramics made from Stabilizer-Coated Nanopowders F. Kern, H. Strumberger, R. Gadow Vol. 9, No. 1, Pages 7-18 DOI: 10.4416/JCST2017-00049 Keywords: Zirconia, phase composition, microstructure, mechanical properties |
| Effects of TiO2 Addition on Kinetics of In Situ Spinel Formation and Properties of Alumina-Magnesia Refractory Castables W. Yuan, H. Tang, H. Shang, J. Li, C. Deng, H. Zhu Vol. 8, No. 1, Pages 121-128 DOI: 10.4416/JCST2016-00098 Keywords: Castables, kinetic, spinel, reaction, properties |
| Electric Field-Assisted Sintering of Gadolinium-Doped Ceria: Sintering and Grain Growth Kinetics S. K. Sistla, T. Mishra, Y. Deng, A. Kaletsch, M. Bram, C. Broeckmann Vol. 11, No. 1, Pages 17-26 DOI: 10.4416/JCST2019-00045 Keywords: Field-assisted sintering technology (FAST), gadolinium-doped ceria, modeling, densification, grain growth |
| Electric-Field-Induced Phase Transition in Mn-Doped (K0.48Na0.48Li0.04)NbO3 Lead-Free Ceramics H.E. Mgbemere, G.A. Schneider, L. Schmitt, M. Hinterstein Vol. 8, No. 1, Pages 45-52 DOI: 10.4416/JCST2016-00074 Keywords: Keywords: (KxNa1-x)NbO3, high resolution, X-ray diffraction, electric field, lead-free ceramics |
| Electrical and Dielectric Properties of Isostatically Pressed Alumina-Based Electroporcelain V. Trnovcová, M. Kubliha, I. Štubňa, Š. Csáki, Š. Csáki Vol. 9, No. 2, Pages 149-154 DOI: 10.4416/JCST2017-00089 Keywords: Electrical conductivity, dielectric properties, alumina-based electroporcelain, cold isostatic pressing |
| Electrical and Thermal Properties of Ti3AlC2 at High Temperature X.-K. Qian, Y.-B. Li, X.-D. He, Y.-X. Chen, S.-N. Yun Vol. 2, No. 3, Pages 155-158 DOI: 10.4416/JCST2011-00018 Keywords: Ceramics, thermal conductivity, thermal expansion, electrical properties |
| Electrical Resistivity of Si3N4-SiC-MeSi2 (Me = Nb, Mo, W, Zr) Composites E. Zschippang, H. Klemm, M. Herrmann, S. Höhn, B. Matthey, U. Guth, A. Michaelis Vol. 4, No. 4, Pages 197-206 DOI: 10.4416/JCST2013-00012 Keywords: Electrical resistivity, silicon nitride, silicon carbide, α → β transformation, composite |
| Electrochemically Induced Degradation of Screen-Printed Gold Thick Films T.J. Rabbow, N. Junker, C. Kretzschmar, M. Schneider, A. Michaelis Vol. 3, No. 4, Pages 199-210 DOI: 10.4416/JCST2012-00023 Keywords: LTCC, screen printing gold paste, thick film electrode, electrochemical degradation |
| Enhanced Electrochemical Performance of Cu-Doped La2NiO4+δ Cathode for Solid Oxide Fuel Cells H. Chen, H. Chen, X. Li, X. Du, H. Xie, L. Zhao, Y. Ling, Y. Ling Vol. 9, No. 2, Pages 155-162 DOI: 10.4416/JCST2017-0090 Keywords: Ruddlesden-Popper-type oxide, interstitial oxygen, interface polarization resistance, chromium-tolerant cathode |
| Enhanced Magneto-Dielectric Properties of 0.6La0.1Bi0.9FeO3- 0.4BaTiO3/NiFe2O4 Composites Sintered with Powders Prepared with a One-Step Sol-Gel In-Situ Method L. He, J. H. Wang, Z. T. Zhong, C. Zhang Vol. 9, No. 2, Pages 175-182 DOI: 10.4416/JCST2017-00096 Keywords: Ceramic composites, sol-gel in-situ method, magnetic-dielectric properties |
| Enhanced Mechanical and Electromagnetic-Wave-Absorption Properties of Ceramic Matrix Composites Fabricated by Novel Laser-Machining-Assisted CVI J. Wang, Y. Liu, L. Cheng, X. Chen, Q. Zhou, Z. Hou, F. Ye Vol. 9, No. 1, Pages 79-84 DOI: 10.4416/JCST2017-00080 Keywords: Ceramic matrix composites, laser-machining-assisted CVI, mechanical properties, electromagnetic-wave-absorbing properties |
| Enhancement of Piezoelectric Properties in Lanthanum-Modified Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics via Spontaneous Relaxor-to-Ferroelectric Transition Y. Wang, C. Chen, S. Qian, X. Zhang Vol. 13, No. 2, Pages 121-126 DOI: 10.4416/JCST2022-00009 Keywords: Relaxor ferroelectric, spontaneous transition, piezoelectric property, dielectric property, ferroelectric property |
| Enhancing the Mechanical Properties of (Hf-Ta-Ti-Zr-Nb)C High-Entropy Carbides Using a Multi-Step Spark Plasma Sintering Process J. Song, J. Seok, J. Seok, S.-Y. Kim, S.-Y. Kim, J. Han, H. Kim Pages 1-8 DOI: 10.4416/JCST2023-00008 Keywords: High-entropy carbide, multi-step spark plasma sintering, mechanical properties |
| Estimation of Damage in Refractory Materials after Progressive Thermal Shocks with Resonant Frequency Damping Analysis N. Traon, T. Tonnesen, R. Telle Vol. 7, No. 2, Pages 165-172 DOI: 10.4416/JCST2015-00080 Keywords: Thermal shock, impulse excitation technique, partially stabilized zirconia, Young's modulus, damping |
| Estimation of fiber/matrix interfacial friction coefficient in continuous fiber-reinforced ceramic-matrix composites at room and elevated temperatures under cyclic loading L. Li Vol. 9, No. 4, Pages 371-380 DOI: 10.4416/JCST2018-00015 Keywords: Ceramic-matrix composites (CMCs); fatigue; interface debonding; interface frictional coefficient. |
| Evaluating Porosity in Cordierite Diesel Particulate Filter Materials, Part 1 X-Ray Refraction A. Kupsch, A. Lange, M.P. Hentschel, Y. Onel, T. Wolk, A. Staude, K. Ehrig, B. R. Müller, G. Bruno Vol. 4, No. 4, Pages 169-176 DOI: 10.4416/JCST2013-00021 Keywords: Porous ceramics, pore orientation, x-ray refraction, synchrotron, interface. |
| Evaluating Porosity in Cordierite Diesel Particulate Filter Materials, Part 2 Statistical Analysis of Computed Tomography Data Y. Onel, A. Lange, A. Staude, K. Ehrig, A. Kupsch, M.P. Hentschel, T. Wolk, B.R. Müller, G. Bruno Vol. 5, No. 1, Pages 13-22 DOI: 10.4416/JCST2013-00022 Keywords: Pore orientation, porous ceramics, computed tomography, 3D microstructure |
| Evaluation of Rheological and Thermal Behavior of Ceramic Materials during Liquid Phase Sintering with Numerical-Experimental Procedure E. Salahi, H. Yaghoubi, F. Taati Vol. 8, No. 4, Pages 471-484 DOI: 10.4416/JCST2017-00019 Keywords: Rheological behavior, hard porcelain, liquid phase sintering, numerical-experimental analysis |
| Evolution of the Fibre-Matrix Interactions in Basalt-Fibre-Reinforced Geopolymer-Matrix Composites after Heating M. Welter, M. Schmücker, K.J.D. MacKenzie Vol. 6, No. 1, Pages 17-24 DOI: 10.4416/JCST2014-00034 Keywords: Geopolymer-matrix composites, fibre-matrix interaction, interface, basalt fibre |
| Experimental and Numerical Investigations of Laser Beam Polishing of Quartz Glass Surfaces J. Hildebrand, B. Wittor, K. Hecht, J. Bliedtner, H. Müller Vol. 4, No. 1, Pages 25-32 DOI: 10.4416/JCST2012-00027 Keywords: Laser beam polishing, stock removal, roughness, numerical simulation, sensitivity |
| Experimental Characterization and Thermomechanical Modelling of Microstructure Interactions in Cellular Carbon Magnesia Refractories G. Falk, A. Jung, W. da Silveira, S. Diebels Vol. 5, No. 2, Pages 101-114 DOI: 10.4416/JCST2013-00029 Keywords: Porous carbon, thermal shock, FEM modelling |
| Experimental Determination of the Maximum Allowable Stresses for High-Power Piezoelectric Generators H. Abramovich, E. Tsikchotsky, G. Klein Vol. 4, No. 3, Pages 131-136 DOI: 10.4416/JCST2013-00006 Keywords: PZT, power generator, stress, cyclic loads, electrical resistance |
| Experimental Investigation of the In-Plane Shear Behavior on Needled C/SiC Composites using Digital Image Correlation G. Yu, X. Gao, Y. Song, Y. Song Vol. 7, No. 4, Pages 387-396 DOI: 10.4416/JCST2016-00052 Keywords: Shear behavior, C/SiC composites, digital image correlation, strain field, failure mechanism |
| Exploring the Relationship between Crystalline Structure and Intrinsic Properties for MgGa2O4 Transparent Ceramic with the Bond Valence Method Shiqiao Li, Hao Wang, Bin Wang, Bingtian Tu, Weimin Wang, Zhengyi Fu Vol. 12, No. 2, Pages 87-96 DOI: 10.4416/JCST2020-00027 Keywords: MgGa2O4 transparent ceramic, crystal structure, properties, bond valence method |
| Extrusion Process for the Manufacture of Beta″-Alumina Solid Electrolyte Tubes Y. Hu, S.N. Heavens, J.S. Blackburn, S. Blackburn Vol. 8, No. 1, Pages 25-30 DOI: 10.4416/JCST2016-00060 Keywords: Beta″-alumina solid electrolyte tubes, solvent- and aqueous-binder-based ceramic extrusion, one-step reaction-sintering processing method, introduction of zirconia oxide into beta″-alumina ceramic, axial and radial resistivity of beta″-alumina tubes |
| Fabrication and Dielectric Properties of LiTaO3 Matrix Ceramics with Added Manganese Dioxide Y. Yao, Y. Zhang Vol. 11, No. 1, Pages 27-35 DOI: 10.4416/JCST2019-00053 Keywords: LiTaO3 ceramics, manganese dioxide, microstructure, dielectric properties |
| Fabrication of complicated silicon carbide ceramic components by acrylate gel-casting Chuanru Cao, Shuyue Gao, Ying Sun, Bohang Xing, Cao Wang, Zhe Zhao Vol. 12, No. 1, Pages 37-48 DOI: 10.4416/JCST2021-00005 Keywords: Gel casting, SiC, rheological behaviour, complex structural, mechanical properties |
| Fabrication of MAX-Phase-Based Ceramics by Three-Dimensional Printing Y. Ma, X. Yin, X. Fan, N. Travitzky, P. Greil Vol. 6, No. 2, Pages 87-94 DOI: 10.4416/JCST2015-00006 Keywords: Three-dimensional printing, RMI, Ti3SiC2, Ti3AlC2. |
| Fabrication of Tin-Doped Indium Oxide Thin Films Using Aerosol Deposition Y. Hasegawa, Y. Sato, S. Yoshikado Vol. 7, No. 4, Pages 429-432 DOI: 10.4416/JCST2016-00067 Keywords: Tin-doped indium oxide, thin film, aerosol deposition, room-temperature impact consolidation, resistivity |
| Fabrication, Microstructure and Properties of Hot-Pressed Nd:YAG Ceramics S.M. Naga, M. Awaad, H.F. El-Maghraby, W.H.Eisa, M. Abou el Ezz, F. Sommer, R. Gadow Vol. 3, No. 1, Pages 35-40 DOI: 10.4416/JCST2012-00043 Keywords: Keywords: YAG ceramics, Nd2O3 addition, optical properties, microstructure |
| Facile Synthesis and Characterization of MnxZn1-xFe2O4/Activated Carbon Composites for Biomedical Applications J.C. Ríos-Hurtado, A.C. Martínez-Valdés, J.R. Rangel-Méndez, J.C. Ballesteros-Pacheco, E.M. Múzquiz-Ramos Vol. 7, No. 3, Pages 289-294 DOI: 10.4416/JCST2016-00020 Keywords: Mn-Zn ferrite, superparamagnetic, activated carbon, composite, hemolysis. |
| Factors Affecting the Performance of Thermal Barrier Coatings in the Presence of V2O5 and Na2SO4 K.P. Jonnalagadda, R. Eriksson, R.L. Peng, X.-H. Li, S. Johansson Vol. 7, No. 4, Pages 409-416 DOI: 10.4416/JCST2016-00058 Keywords: HOSP, agglomerated and sintered YSZ, hot corrosion, TBC |
| Failure Resistance Optimisation in Layered Ceramics Designed with Strong Interfaces Raúl Bermejo, Robert Danzer Vol. 1, No. 1, Pages 15-20 DOI: 10.4416/JCST2010-00007 Keywords: Layered ceramics, failure resistance, crack bifurcation, interface delamination. |
| Feasibility Study on Rapid Prototyping of Porcelain Products X. Tian, T. Mühler, C. Gomes, J. Günster, J.G. Heinrich Vol. 2, No. 4, Pages 217-226 DOI: 10.4416/JCST2011-00038 Keywords: Layer-wise slurry deposition, mechanical properties, porcelain, structural applications, rapid prototyping |
| Fine Grinding of Bioceramics for Knee Implants with Elastically Bonded Abrasives: Process Modeling and Validation A. Müller, B. Denkena Vol. 6, No. 1, Pages 31-40 DOI: 10.4416/JCST2014-00024 Keywords: Biomedical ceramics, processing by polishing and fine grinding, elastic tool, surface topography, knee implant |
| First-Principles Study of a New Higher-Order MAX Phase of Ti5Al2C3 X.-K. Qian, X.-K. Qian, X.-K. Qian, H.-Y. Wu, H.-P. Zhu, S.-H. Ma, T. Jiang Vol. 7, No. 1, Pages 47-52 DOI: 10.4416/JCST2015-00027 Keywords: Ti5Al2C3, first-principles, mechanical stability, electronic structure |
| Fly-Ash-Based Geopolymers: How the Addition of Recycled Glass or Red Mud Waste Influences the Structural and Mechanical Properties N. Toniolo, G. Taveri, K. Hurle, J.A. Roether, P. Ercole, I. Dlouhý, A.R. Boccaccini Vol. 8, No. 3, Pages 411-420 DOI: 10.4416/JCST2017-00053 Keywords: Geopolymers, fly ash, red mud, waste glass |
| Formation, Decomposition and Thermal Stability of Al2TiO5 Ceramics I.J. Kim, L.G. Gauckler Vol. 3, No. 2, Pages 49-60 DOI: 10.4416/JCST2011-00049 Keywords: Al2TiO5, formation, decomposition, low thermal expansion, thermal stability, thermal shock-resistant, raw materials |
| Free Forming of Porous Ceramic Parts by Rapid Freeze Gelation (RFG) L. Henkel, Chr. Soltmann, L. Vinke, D. Koch, G. Grathwohl Vol. 2, No. 2, Pages 125-132 DOI: 10.4416/JCST2011-00004 Keywords: Freeze gelation, rapid prototyping, porous ceramic |
| Functionally Graded Ceramic Structures by Direct Thermal Inkjet Printing P. Gingter, A.M. Wätjen, M. Kramer, R. Telle Vol. 6, No. 2, Pages 119-124 DOI: 10.4416/JCST2014-00033 Keywords: Direct inkjet printing, suspensions, functionally graded materials, ZrO2, Al2O3 |
| Future Research in Refractories: A Roadmap Approach A. Geigenmüller, H. Spindler, K. Lenk, C. G. Aneziris Vol. 5, No. 2, Pages 71-76 DOI: 10.4416/JCST2013-00032 Keywords: Roadmap, strategic planning, refractories, materials synthesis, preparation, processing, testing, modeling and simulation |
| Gadolinia-Neodymia-Co-Stabilized Zirconia Materials with High Toughness and Strength F. Kern Vol. 3, No. 3, Pages 119-130 DOI: 10.4416/JCST2012-00004 Keywords: Zirconia, mechanical properties, R-curve, phase composition, microstructure |
| Gas Permeance and Selectivity of Perovskite-Titania Membranes A.L. Ahmad, N.A. Abdullah Sani, S.H.S. Zein Vol. 2, No. 1, Pages 9-14 DOI: 10.4416/JCST2010-00026 Keywords: Titania membrane, perovskite, calcination temperature, concentration, morphology, phase structure |
| Geopolymers: Ceramic-Like Inorganic Polymers J. Davidovits Vol. 8, No. 3, Pages 335-350 DOI: 10.4416/JCST2017-00038 Keywords: Geopolymer, polymerization mechanism, applications, properties, molecular structure. |
| Glaze surface Defects causes and Prevention Controls E. Youssef, E. Youssef, N. Mostafa, J.E. Khoury, T. Merhej, R. Lteif Vol. 14, No. 1, Pages 1-10 DOI: 10.4416/JCST2022-00003 Keywords: Ceramic, glaze defects, glaze pinholes, crawling, crazing |
| Graphite carbon enclosed AlN nanoparticles with enhanced methanol-tolerant electrocatalytic properties for oxygen reduction C. Liang, H. Wang, K. Huang, W. Liu, K. Bi, M. Lei Vol. 10, No. 1, Pages 1-8 DOI: 10.4416/JCST2018-00041 Keywords: Aluminum nitride, composite materials, graphite carbon, fuel cells, oxygen reduction reaction. |
| Growth of 2M-Wollastonite Polycrystals by a Partial Melting and Recrystallization Process for the Preparation of High-Aspect-Ratio Particles L. Zhu, H.Y. Sohn Vol. 3, No. 4, Pages 169-180 DOI: 10.4416/JCST2012-00032 Keywords: Wollastonite, partial melting, acicular, high aspect ratio, synthesis |
| Heat Transfer in Transparent YAG Nanoceramic J. Mucha, A. Chuchmała, D. Hreniak, A. Jeżowski, W. Strek Vol. 2, No. 3, Pages 179-182 DOI: 10.4416/JCST2011-00014 Keywords: Ceramics, amorphous materials, nanostructures, thermal conductivity, YAG |
| High Permittivity and Dielectric Response of CaCu3Ti3.9(Y0.5Nb0.5)0.1O12 Ceramics Y. Liu, X. Huang Vol. 8, No. 2, Pages 243-248 DOI: 10.4416/JCST2016-00112 Keywords: Dielectric properties, impedance, co-doping, grain boundary, interfacial polarization |
| High-Performance, Corrosion-Resistance Sealing Glasses for Primary Lithium Batteries: Preparation, Properties and Applications Z. Wang, S.J. Hua, W.H. Liu, W.B. Yang, Q. Feng, Q. Feng Vol. 14, No. 1, Pages 31-38 DOI: 10.4416/JCST2022-00015 Keywords: Glass, sealing, performance, corrosion resistance. |
| High-Performance, Corrosion-Resistance Sealing Glasses for Primary Lithium Batteries: Preparation, Properties and Applications Z. Wang, S.J. Hua, W.H. Liu, W.B. Yang, Q. Feng, Q. Feng Pages 31-38 DOI: DOI of the original article: 10.4416/JCST2022-00015 Keywords: |
| High-Temperature Behaviour of Alkali-Activated Composites based on Fly Ash and Recycled Refractory Particles L. Carabba, S. Manzi, E. Rambaldi, G. Ridolfi, M.C. Bignozzi, M.C. Bignozzi Vol. 8, No. 3, Pages 377-388 DOI: 10.4416/JCST2017-00047 Keywords: Alkali-activated composites, fly ash, refractory, thermal behaviour, heat exposure |
| High-Temperature Joining of Ceramics and Sapphire by Laser-Based Process S. Kasch, D. Conrad, S. Sändig Vol. 5, No. 4, Pages 269-274 DOI: 10.4416/JCST2014-00027 Keywords: Alumina, joining, laser, glass solder, high temperature |
| High-Temperature Measurements of Macroscopic Deformation Induced by Phase Changes: Application to Bauxite-Based Material A. Coulon, E. de Bilbao, S. Brassamin, J. Poirier Vol. 9, No. 2, Pages 119-126 DOI: 10.4416/JCST2017-00085 Keywords: Refractory materials, contactless measurement, deformation, high temperature, phase transformation |
| Higher Electronics Circuit Integrations within the Fractal Electronics Frontiers V.V. Mitic, V.V. Mitic, V. Paunovic, Lj. Kocic Vol. 7, No. 4, Pages 365-378 DOI: 10.4416/JCST2016-00047 Keywords: Ceramics, Coble's model, Heywang model, Curie-Weiss law |
| Highly Porous 3D Printed Stoneware Ceramic G.L.S. Marchelli, M.A. Ganter, D.W. Storti Vol. 3, No. 1, Pages 41-48 DOI: 10.4416/JCST2011-00042 Keywords: Printed ceramic, stoneware, stiffness, 3DP |
| Highly Porous Scaffolds Made of Nanosized Hydroxyapatite Powder Synthesized from Eggshells S.M. Naga, H.F. El-Maghraby, M. Sayed, E.A. Saad Vol. 6, No. 3, Pages 237-244 DOI: 10.4416/JCST2014-00058 Keywords: Bioceramics, hydroxyapatite, porous scaffolds, mechanical properties |
| Hot Corrosion Behavior of ZrB2-SiC-Graphite Composite in NaCl and Na2SO4 Molten Salts X. Liu, G. Wang, L. Liu, Z. Wang, Z. Wu, M. Liu Vol. 9, No. 3, Pages 309-318 DOI: 10.4416/JCST2018-00020 Keywords: ZrB2-based composites, molten salts, hot corrosion, sulfidation |
| Hybrid Laser Ablation of Al2O3 Applying Simultaneous Argon Plasma Treatment at Atmospheric Pressure C. Gerhard, S. Roux, F. Peters, S. Brückner, S. Wieneke, W. Viöl Vol. 4, No. 1, Pages 19-24 DOI: 10.4416/JCST2012-00034a Keywords: Aluminium oxide, laser ablation, atmospheric pressure plasma, hybrid laser-plasma ablation |
| Hydrogen insertion in Ti2AlC and its influence on the crystal structure and bonds Q. Liu, H. M. Ding, B. Q. Du, K. Y. Chu, Y. Shi Vol. 8, No. 2, Pages 201-208 DOI: 10.4416/JCST2016-00082 Keywords: MAX phases, Ti2AlC, first-principles calculations. |
| Hydrothermal Synthesis of ZnAlGaO4 and the Effect of the Post-Heat Treatment on the Enhancement in Crystallinity K. Sakoda, M. Hirano Vol. 6, No. 1, Pages 9-16 DOI: 10.4416/JCST2014-00031 Keywords: Oxides, chemical synthesis, spinel, crystal structure, optical properties |
| Hysteresis upon Repeated Cycling through the Beta-Alpha Cristobalite Transformation R. C. Breneman, J. W. Halloran Vol. 6, No. 1, Pages 55-62 DOI: 10.4416/JCST2014-00048 Keywords: Cristobalite, silica, phase transformation, hysteresis |
| Impact of Ba2+on Structure and Electrical Properties of 0.65PMN-0.35PT Ceramics C. Lu, C. Lu, Y. Liu, Y. Liu, C. Lyu, C. Lyu, F. Chen, F. Chen, H. Xi, H. Xi, Y. Lyu, Y. Lyu, Y. Lyu Vol. 9, No. 3, Pages 337-344 DOI: 10.4416/JCST2018-00023 Keywords: PMN-PT, strain, piezoelectric properties, morphotropic phase boundary, phase transition |
| Impact of Feedstock Nature on Thermal Conductivity of YSZ Thermal Barrier Coatings Obtained by Plasma Spraying P. Carpio, P. Carpio, M.D. Salvador, R.Benavente, M. Miranda, A. Borrell, E. Sánchez Vol. 7, No. 3, Pages 307-312 DOI: 10.4416/JCST2016-00022 Keywords: Thermal barrier coatings, yttria-stabilized zirconia, microstructure, thermal conductivity, atmospheric plasma spraying |
| Improved Catalytic Properties of Pt Cluster Supported on Defective Graphene Y. Huang, Z. Yu, E. Song Vol. 13, No. 1, Pages 39-44 DOI: 10.4416/JCST2021-00020 Keywords: Graphene, Pt cluster, defects |
| Improved Direct-Current Aging Stability and Suppressed Leakage Current of Zinc Oxide Varistors by Co-doping with Boron, Gallium, and Yttrium Kuan Cheng, Weiqing Wang, Dongji Liu, Qingyun Xie, Yuanxiang Zhou, Hongfeng Zhao Vol. 11, No. 2, Pages 111-116 DOI: 10.4416/JCST2020-00008 Keywords: Ceramic, varistor, electrical properties, DC aging, aging coefficient |
| Improved Flexural Strength in Digital-Light-Processing-Printed Si3N4 Ceramics by Removing Carbon Residue B. Jin, Y. Bian, Y. Shen, B. Xing, M. Li, Z. Zhao Vol. 13, No. 2, Pages 99-106 DOI: 10.4416/JCST2022-00001 Keywords: Keywords: Silicon nitride ceramics, DLP, residual carbon, flexural strength |
| Improving Optical Transmission of Spark-Plasma-Sintered YAG Ceramics: Effect of Powder Conditioning and Post-Treatments R. Moronta Pérez, L. Boilet, P. Aubry, P. Palmero, L. Henrard, O. Deparis, V. Lardot, F. Cambier Vol. 9, No. 1, Pages 19-28 DOI: 10.4416/JCST2017-00052 Keywords: YAG, SPS, transparent ceramics, optical properties |
| In Vitro Characterization of Carbon-Nanotube-Reinforced Hydroxyapatite Composite Coating on 316L Stainless Steel S.P. Mohamadi, A. Nemati, Z. Sadeghian Vol. 4, No. 3, Pages 163-168 DOI: 10.4416/JCST2013-00009 Keywords: Keywords: hydroxyapatite, carbon nanotube, nanocomposite, bioactivity, in vitro test |
| In-Situ Synthesis and Formation Mechanism of Al2O3-Spinel(N) Composite in Nitrogen Atmosphere under Low Oxygen Partial Pressure S. Tong, Y. Li, J. Zhao, M. Yan, Y. Hong, Q. Zheng Vol. 8, No. 4, Pages 513-518 DOI: 10.4416/JCST2017-00030 Keywords: Magnesia aggregates, low oxygen partial pressure, Mg(g), spinel |
| Influence of Different Zn Substitution Sites on the Crystallinity and Morphology of Zn-Doped Nano-Hydroxyapatite Powder Yangyang Wang, Tao Wang Vol. 12, No. 2, Pages 81-86 DOI: 10.4416/JCST2020-00023 Keywords: Zn-doped, hydroxyapatite, morphology, crystal structure, substituted sites |
| Influence of Elevated Temperatures on the Mechanical Behavior of Jute-Textile-Reinforced Geopolymers A.C. Constâncio Trindade, H.A. Alcamand, P.H. Ribeiro Borges, F. de Andrade Silva Vol. 8, No. 3, Pages 389-398 DOI: 10.4416/JCST2017-00045 Keywords: Geopolymers, composites, natural fibers, temperature |
| Influence of Heat Treatment of Amorphous Ti- and B-Containing SiC-Based Fiber in Air on Microstructure and Strength Jiangxi Chen, Baojie Zhang, Danni Xu, Zhaoju Yu, Guomei He Vol. 9, No. 3, Pages 279-288 DOI: 10.4416/JCST2018-00014 Keywords: SiC fiber, oxidation, strength, microstructure, amorphous |
| Influence of Interfaces on Crack Propagation through a Layered Refractory Loaded by Thermal Shock J. Hein, O. El Khatib, M. Kuna Vol. 7, No. 2, Pages 203-208 DOI: 10.4416/JCST2016-00004 Keywords: Keywords: Refractories, multilayer ceramics, thermal shock, cohesive zones, interfaces, crack growth |
| Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts S. Greiner, K. Kurth, C. Fix, T. Braun, J. Franke, D. Drummer Vol. 8, No. 2, Pages 277-286 DOI: 10.4416/JCST2017-00009 Keywords: Ceramic injection molding, surface roughness, ceramic feedstock, Al2O3 ceramics |
| Influence of Meso-Scale Material Properties on Macro-Mechanical Behavior of Three-Dimensional Four-Directional Braided Composites under Uniaxial Tensile Load J. Xin, Z. Fang, S. Yasong Vol. 13, No. 2, Pages 83-98 DOI: 10.4416/JCST2021-00017 Keywords: Four-directional braided composites, ceramic matrix composites, damage models, failure mechanism, meso-scale material properties |
| Influence of MgAl2O4 Spinel Addition on Properties of Alumina-Chrome Refractory Prepared with Alumina-Chrome Slag J. Wu, J. Liu, R. Li, Q. Zhen Vol. 7, No. 4, Pages 447-454 DOI: 10.4416/JCST2016-00076 Keywords: Alumina-chrome refractory, alumina-chrome slag, MgAl2O4 spinel, slag corrosion, crude copper corrosion |
| Influence of Microstructure on Crack Tip Toughness of α-Sialon Ceramics C.T. Bodur, M. Thiele, M. Herrmann Vol. 3, No. 3, Pages 105-110 DOI: 10.4416/JCST2012-00010 Keywords: Sialon, microstructure-final, toughness and toughening, mechanical properties, crack tip toughness |
| Influence of Phase Separation on Thermal Conductivity of Ti1-xSnxO2 Ceramics K. Rubenis, J. Locs, J. Mironova, R. Merijs-Meri Vol. 7, No. 1, Pages 135-138 DOI: 10.4416/JCST2015-00061 Keywords: Titanium dioxide, TiO2, tin dioxide, SnO2, TiO2-SnO2, phase separation, ceramic, thermal conductivity |
| Influence of Phosphoric Acid Treatment on the Photocatalytic Activity of Zinc Oxide H. Onoda, Y. Sato Vol. 7, No. 4, Pages 397-402 DOI: 10.4416/JCST2016-00053 Keywords: Zinc oxide, phosphoric acid treatment, photocatalytic activity, particle size |
| Influence of Polyvinyl Alcohol/Zirconium Polycation Interactions on the Properties of Aqueous Alumina Suspensions C. Rödel, F. Wehner, A. Meyer, T. Meissner, A. Potthoff, A. Michaelis Vol. 3, No. 3, Pages 141-150 DOI: 10.4416/JCST2012-00016 Keywords: Processing, suspension, alumina, polyvinyl alcohol, zirconium cations |
| Influence of Reaction-Sintering and Calcination Conditions on Thermoelectric Properties of Sm-doped Calcium Manganate CaMnO3 S. Bresch, B. Mieller, F. Delorme, C. Chen, M. Bektas, R. Moos, T. Rabe Vol. 9, No. 3, Pages 289-300 DOI: 10.4416/JCST2018-00017 Keywords: Thermoelectric oxides, calcination, solid-state-synthesis, power factor, reaction-sintering |
| Influence of Sintering Conditions on the Microstructure and Properties of Alumina-Filled Borosilicate Glass P.F. Araújo, L.B. Daros, M. Souza, D.E. García, D. Hotza, D. Hotza Vol. 7, No. 1, Pages 119-126 DOI: 10.4416/JCST2015-00048 Keywords: Alumina, borosilicate glass, ceramic-filled glasses, fast firing, sintering |
| Influence of Ta2O5 Doping on the Microstructure, Physical and Mechanical Properties of α-Alumina Ceramics S.M. Naga, A.M. Hassan, M. Awaad, F. Bondioli Vol. 4, No. 4, Pages 187-192 DOI: 10.4416/JCST2013-00017 Keywords: Doping, alumina, tantala, microstructure, mechanical properties. |
| Influence of Temperature Dependence of Bulk Modulus on Crack Propagation Velocity D. Pilipenko, Y. Natanzon, H. Emmerich Vol. 5, No. 2, Pages 77-82 DOI: 10.4416/JCST2013-00033 Keywords: Fracture mechanics, fatigue and cracks, high-temperature ceramics, computational methods in continuum mechanics, multiscale modeling |
| Influence of the Chemical Composition of Ceramic Frits on the Kinetics of their Dissolution Process A. Barba, J.C. Jarque, M. Orduña, M.F. Gazulla Vol. 7, No. 1, Pages 71-78 DOI: 10.4416/JCST2015-00034 Keywords: Frit solubility, glass-ceramics, kinetics, glazes,chemical durability |
| Influence of the Oxygen Flow Rate on Gas Flow Sputtered Thermal Barrier Coatings N. Rösemann, K. Ortner, M. Bäker, J. Petersen, G. Bräuer, J. Rösler Vol. 9, No. 1, Pages 29-36 DOI: 10.4416/JCST2017-00054 Keywords: Thermal barrier coatings, microstructure, oxygen flow rate, gas flow sputtering |
| Influence of the Printing Parameters on the Quality of Alumina Ceramics Shaped by UV-LCM Technology P. Ożóg, P. Ożóg, G. Blugan, D. Kata, T. Graule Vol. 10, No. 2, Pages 1-10 DOI: 10.4416/JCST2019-00023 Keywords: Alumina, LCM, 3D printing, UV-curing, photopolymerisation |
| Influence of Titanium Silicide Active Filler on the Microstructure Evolution of Borosiloxane-Derived Si-B-O-C ceramics V. Vijay, S. Bhuvaneswari, V. M. Biju, R. Devasia Vol. 7, No. 1, Pages 97-106 DOI: 10.4416/JCST2015-00040 Keywords: Polyborosiloxanes, active filler controlled polymer pyrolysis (AFCOP), catalyst-assisted pyrolysis, ceramic nanofiber, titanium disilicide |
| Influence of ZrSiO4 on Honeycomb-Structured Vitrified-Bonded Ultrafine Diamond Grinding Wheels Y. L. Ding, Y. L. Ding, W. P. Miao, W. P. Miao, Y. J. Zhao, Y. J. Zhao, Y. J. Zhao, H. Bao, H. Bao, N. Yan, N. Yan, W. Yang Vol. 13, No. 1, Pages 31-38 DOI: 10.4416/JCST2021-00014 Keywords: ZrSiO4, vitrified-bonded, grinding wheels, Si wafers, honeycomb structure |
| Influences of Cation Disorder in Commercial Spinel Powders Studied by 27Al MAS NMR on the Sintering of Transparent MgAl2O4 Ceramics A. Krell, E. Brendler Vol. 4, No. 2, Pages 51-58 DOI: 10.4416/JCST2012-00029 Keywords: Spinel (MgAl2O4), transparency, sintering, antisite defects, 27Al NMR |
| Injection Molding of Alumina-Chromia-Yttria Composites F. Sommer, F. Kern, R. Gadow Vol. 2, No. 4, Pages 211-216 DOI: 10.4416/JCST2011-00035 Keywords: Alumina, yttria, YAG, composite, injection molding |
| Instrumented Compaction Experiments under Varied Climatic Conditions Ulrich Klemm, Bettina Schöne, Hermann Svoboda, Manfred Fries, Manfred Nebelung Vol. 1, No. 1, Pages 59-66 DOI: 10.4416/JCST2010-00016 Keywords: Instrumented compaction, friction, silicon nitride, granulate, climatic conditions |
| Insulating Foams and Dense Geopolymers from Biochar By-Products R. Farges, A. Gharzouni, B. Ravier, P. Jeulin, S. Rossignol Vol. 9, No. 2, Pages 193-200 DOI: 10.4416/JCST2017-00098 Keywords: Biochar, FTIR, geopolymer, foams, thermal conductivity |
| Integration of Piezoceramic Composites into Structural Components: Effect on the Polarisation State and Polarisability K. Hohlfeld, S. Eßlinger, A. Eydam, A. Winkler, T. Weber, M. Gude, N. Modler, G. Gerlach, G. Suchaneck, A. Michaelis, A. Michaelis, A. Schönecker, S. Gebhardt, P. Neumeister Vol. 10, No. 1, Pages 19-26 DOI: 10.4416/JCST2018-00071 Keywords: Piezofibre composite, Integration, Polarisation state, Polarisability |
| Interface Design and Processing of Bioactive Microporous Calcium Phosphate Coatings on Load-Bearing Zirconia Substrate R. Sultana, J. Yang, Z. Sun, X. Hu Vol. 8, No. 2, Pages 265-276 DOI: 10.4416/JCST2017-00005 Keywords: Interface design, interlocked interface processing, calcium phosphate/zirconia composite, mechanical strength, microstructure |
| Interlaminar Shear Response of Carbon/Carbon in Torsion Tests T. Krause, R.S.M. Almeida, E. Volkmann, K. Tushtev, D. Koch, K. Rezwan, K. Rezwan, G. Grathwohl Vol. 9, No. 3, Pages 319-326 DOI: 10.4416/JCST2018-00021 Keywords: Carbon fibers, ceramic matrix composites (CMCs), delamination, shear strength. |
| Introduction of Glassy Spheres in an Acrylic Matrix: A New Solution for Low-Pressure Sanitaryware Moulds A. Fortuna, D. M. Fortuna, E. Martini, V. Tagliaferri, G. Rubino Vol. 6, No. 3, Pages 249-254 DOI: 10.4416/JCST2015-00019 Keywords: Keywords: Sanitaryware casting, thickness formation, beta plaster moulds, acrylic resin and glassy spheres, flexural strength and abrasion resistance. |
| Intumescent Geopolymer-Bound Coatings for Fire Protection of Steel M.-B. Watolla, G.J.G. Gluth, P. Sturm, W.D.A. Rickard, S. Krüger, B. Schartel Vol. 8, No. 3, Pages 351-364 DOI: 10.4416/JCST2017-00035 Keywords: Geopolymers, aluminosilicate inorganic polymers, intumescence, coatings, fire resistance, fire protection |
| Investigation into the Solid-Solution (Na1-xKx)2Mo2O7 Ceramic and the Effect on Sintering Property X. Yuan, X. Yuan, H. Liu, Y. Wei, Y. Wang, Q. Gao Vol. 14, No. 1, Pages 11-16 DOI: 10.4416/JCST2022-00006 Keywords: Low sintering temperature, sintering performance, dielectric ceramic |
| Investigation of Chemically Modified ICIE16 Bioactive Glass, Part II F.J. Hmood, F. Schmidt, O. Goerke, J. Günster Vol. 11, No. 1, Pages 1-10 DOI: 10.4416/JCST2019-00031 Keywords: Bioactive glass, viscous sintering, crystallization, processing window, grain boundary |
| Investigation of the Mechanical Properties and Machinability of Fluorphlogopite-Gehlenite Glass-Ceramics B. Eftekhari Yekta, Z. Hamnabard Vol. 4, No. 4, Pages 193-196 DOI: 10.4416/JCST2013-00019 Keywords: Mechanical properties, glasses |
| Large-Scale Synthesis of α-Si3N4 Nanofibers and Nanobelts from Mesoporous Silica-Carbon Nanocomposites K. Wang, H. Wang, Y.-B. Cheng Vol. 8, No. 2, Pages 259-264 DOI: 10.4416/JCST2016-00118 Keywords: Silicon nitride, nanofibers, nanobelts, mesoporous, nanocomposites, carbothermal reduction and nitridation |
| Laser Synthesis of Al2TiO5 Ceramics from Al2O3-TiO2 Powder Mixtures M. Vlasova, B. Sosa Coeto, M. Kakazey, P. A. Marquez Aguilar, , A. Escobar Martinez, V. Stetsenko, A. Bykov Vol. 3, No. 2, Pages 61-68 DOI: 10.4416/JCST2012-00005 Keywords: Al2O3, TiO2, laser treatment, Al2TiO5 |
| Laser-Assisted Microwave Plasma Processing of Ceramic Coatings M. Willert-Porada, P. Pontiller, H.-S. Park, A. Rosin Vol. 4, No. 1, Pages 1-10 DOI: 10.4416/JCST2013-00003 Keywords: Microwave plasma, ceramic melt processing, LIB, MIB |
| Laser-Fused Transparent Microspheres with the Eutectic Composition Al2O3-Y2O3-ZrO2 (AYZ) C. Oelgardt, J. Günster, J. G. Heinrich Vol. 2, No. 2, Pages 103-110 DOI: 10.4416/JCST2011-00010 Keywords: Eutectic ceramics, Al2O3-Y2O3-ZrO2, laser processing, crystallization behavior, microstructure |
| Laser-Induced Slip Casting (LIS) – a New Additive Manufacturing Process for Dense Ceramics Demonstrated with Si3N4 J. Lüchtenborg, T. Mühler, F. Léonard, J. Günster Vol. 8, No. 4, Pages 531-540 DOI: 10.4416/JCST2017-00091 Keywords: Silicon nitride, additive manufacturing, slurry based |
| Liquid Phase Effect of Bi2O3 and La2O3 on Densification, Microstructure and Microwave Dielectric Properties of MgTiO3 Ceramics T. Santhosh Kumar, D. Goswami, D. Pamu Vol. 4, No. 3, Pages 145-150 DOI: 10.4416/JCST2013-00004 Keywords: Keywords: Microwave ceramics, sintering, dielectric properties, scanning electron microscopy, x-ray diffraction |
| Low temperature synthesis of alpha alumina platelets and acicular mullite in MgO-Al2O3-SiO2 system M. A. Zalapa-Garibay, M. A. Zalapa-Garibay, A. Arizmendi-Moraquecho, S. Y. Reyes-López Vol. 10, No. 1, Pages 9-18 DOI: 10.4416/JCST2018-00043 Keywords: Mullite, alumina, microstructure. |
| Low-Carbon Carbon-Bonded Alumina Refractories for Functional Components in Steel Technology V. Stein, C. G. Aneziris Vol. 5, No. 2, Pages 115-124 DOI: 10.4416/JCST2013-00036 Keywords: Alumina, graphite, electron transfer |
| Low-Temperature Degradation Behaviour and Mechanical Properties of a 3Y-TZP Manufactured from Detonation-Synthesized Powder F. Kern, V. Lindner, R. Gadow Vol. 7, No. 4, Pages 313-322 DOI: 10.4416/JCST2016-00036 Keywords: Zirconia, mechanical properties, phase composition, microstructure, low-temperature degradation |
| Low-Temperature Preparation of Lanthanum Hexaboride Fine Powder via Magnesiothermic Reduction in Molten Salt K. Bao, C. Liu, B. Yazdani Damavandi, S. Zhang Vol. 7, No. 4, Pages 403-408 DOI: 10.4416/JCST2016-00057 Keywords: Lanthanum hexaboride, molten salt synthesis, cathode material. |
| Low-Temperature Sintering and Microwave Dielectric Properties of Li2O-3ZnO-5TiO2 Ceramics Doped with B2O3 J. Liu, J. Zhu, J. Zhu, Y. Zeng Vol. 10, No. 2, Pages 1-8 DOI: 10.4416/JCST2019-00055 Keywords: Microwave dielectric properties, LTCC, Li2O-3ZnO-5TiO2 |
| Low-Temperature Spark Plasma Sintering of a SiC Nanopowder with a Very Thin Al-Based Layer K. Shimoda Vol. 9, No. 4, Pages 411-418 DOI: 10.4416/JCST2018-00035 Keywords: SiC, nanopowders, additives, sintering, microstructure |
| LSD-based 3D printing of alumina ceramics A. Zocca, P. Lima, J. Günster Vol. 8, No. 1, Pages 141-148 DOI: 10.4416/JCST2016-00103 Keywords: Additive manufacturing, layer-wise slurry deposition, dense alumina, 3D printing |
| LTCC-Based Multi-Electrode Arrays for 3D in Vitro Cell Cultures H. Bartsch, M. Himmerlich, M. Fischer, L. Demkó, J. Hyttinen, A. Schober Vol. 6, No. 4, Pages 315-324 DOI: 10.4416/JCST2015-00056 Keywords: Low-temperature cofired ceramics (LTCC), three-dimensional hybrid multi-electrode array (3D MEA), in vitro cell culture, thick-film gold electrode, primary neuron culture |
| Magnesium Aluminate Spinel Ceramics Containing Aluminum Titanate for Refractory Applications K. Moritz, C.G. Aneziris, D. Hesky, N. Gerlach Vol. 5, No. 2, Pages 125-130 DOI: 10.4416/JCST2013-00037 Keywords: Refractories, magnesium aluminate spinel, aluminum titanate, thermal shock resistance |
| Magnetic Phase Transitions in Macro/Mesoporous Bioactive Glass by Ferric Nitrate Addition in Sol-Gel Synthesis T. Charoensuk, C. Sirisathitkul, W. Tangwatanakul, S. Pinitsoontorn, U. Boonyang Vol. 7, No. 1, Pages 139-144 DOI: 10.4416/JCST2015-00065 Keywords: Bioactive glass, mesopore, macropore, sol-gel method, magnetic properties |
| Manufacture and Tribological Behavior of C/C-SiC Brake Composites Modified with Fe-Si Alloy Y-H. Lu, Z. Li, Z. Li, W. Zhou, P. Xiao Vol. 8, No. 2, Pages 213-222 DOI: 10.4416/JCST2016-00086 Keywords: C/C-SiC, friction, wear |
| Manufacture of Rotationally Symmetric Multilayer Refractory Devices for Steel Casting Applications by Spiral Winding of Ceramic Green Tapes D. Jakobsen, R. Hammerbacher, S. Dudczig, T. Fey, A. Roosen Vol. 5, No. 2, Pages 137-144 DOI: 10.4416/JCST2013-00040 Keywords: Keywords: Spiral winding, green tapes, refractories, thermal shock |
| Manufacturing of SiO2-Coated β-TCP Structures by 3D Printing using a Preceramic Polymer as Printing Binder and Silica Source R. de Melo Bernardino, C. Wirth, S.L. Stares, G.V. Salmoria, D. Hotza, J. Günster Vol. 9, No. 1, Pages 37-42 DOI: 10.4416/JCST2017-00056 Keywords: Tricalcium phosphate, three-dimensional printing, preceramic polymer, bone regeneration |
| Materials and Processes of Microelectronic Packaging including Low-Temperature Cofired Ceramics Technology (Past, Present and Future) Y. Imanaka Vol. 6, No. 4, Pages 291-300 DOI: 10.4416/JCST2015-00050 Keywords: Low-temperature cofired ceramics (LTCC), microelectronic packaging, flexible electronics, aerosol-type nanoparticle deposition (NPD), embedded passive |
| Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion E. de Bilbao, P. Prigent, C. Mehdi-Souzani, M.-L. Bouchetou, N. Schmitt, J. Poirier, E. Blond Vol. 4, No. 4, Pages 207-2012 DOI: 10.4416/JCST2013-00011 Keywords: Corrosion, SiC, refractories, volume expansion |
| Mechanical and Biological Properties of Biphasic Calcium Phosphate Scaffold depending on Different Nanoparticle Fabrication Methods M.-H. Hong, S.-M. Kim, Y.-K. Lee Vol. 8, No. 4, Pages 541-546 DOI: 10.4416/JCST2017-00033 Keywords: Calcium phosphates, scaffolds, mechanical property, biological property |
| Mechanical Behaviour of Zirconia-Toughened Alumina Laminates with or without Y-PSZ Intermediate Layers M.D. Barros, P.L. Rachadel, M.C. Fredel, R. Janssen, D. Hotza Vol. 9, No. 1, Pages 69-78 DOI: 10.4416/JCST2017-00077 Keywords: ZTA, Y-PSZ, laminated composites, tape casting |
| Mechanical Characterisation of Carbon-Bonded Magnesia at Temperatures up to 1400 °C J. Solarek, C.G. Aneziris, H. Biermann Vol. 7, No. 2, Pages 193-202 DOI: 10.4416/JCST2016-00017 Keywords: Refractories, high temperature carbon-bonded magnesia, mechanical properties, creep |
| Mechanical Characterization of PZT Ceramics for Multilayer Piezoelectric Actuators R. Bermejo, M. Deluca Vol. 3, No. 4, Pages 159-168 DOI: 10.4416/JCST2012-00025 Keywords: Piezoelectric multilayer actuator, domain switching, strength, fracture resistance, Raman spectroscopy |
| Mechanical Properties of Zirconia Y-TZP Core Veneered for Dentistry Applications C.N. Elias, H.E.S. dos Santos, M. Garbossa, C. dos Santos Vol. 8, No. 4, Pages 525-530 DOI: 10.4416/JCST2017-00032 Keywords: Y-TZP, zirconia nano-particles, dental prosthesis, zirconia core veneered |
| Mechanical Properties, Strengthening and Toughening Mechanisms of Reactive-Hot-Pressed TiB2-SiC-Ni Ceramic Composites G. Zhao, C. Huang, N. He, H. Liu Vol. 8, No. 2, Pages 233-242 DOI: 10.4416/JCST2016-00110 Keywords: TiB2-SiC-Ni composite, mechanical properties, microstructure, reactive hot pressing, strengthening and toughening mechanism. |
| Methods for Geopolymer Formulation Development and Microstructural Analysis A. van Riessen, W.D.A. Rickard, R.P. Williams, G.A. van Riessen Vol. 8, No. 3, Pages 421-432 DOI: 10.4416/JCST2017-00065 Keywords: Alkali-activated materials, geopolymer, precursor |
| Methods of Quantification of the Internal Structures of Spray Granules S. Höhn, S. Eckhard, M. Fries, B. Matthey, M. Herrmann, A. Michaelis Vol. 2, No. 2, Pages 75-88 DOI: 10.4416/JCST2011-00003 Keywords: Granule, microstructure quantification, ion beam preparation, porosity, particle distance |
| Micro-Positioning Stages for Adaptive Optics Based on Piezoelectric Thick Film Actuators S. Gebhardt, D. Ernst, B. Bramlage, O. Pabst, A. Oberdörster Vol. 6, No. 4, Pages 285-290 DOI: 10.4416/JCST2015-00060 Keywords: PZT, thick film, screen printing, actuator, adaptive optics |
| Microscale-Motivated Continuum Damage Simulations of Brittle Ceramics under Thermomechanical Loading J. Gundlach, D. Henneberg, J. Scheel, A. Ricoeur Vol. 7, No. 2, Pages 145-154 DOI: 10.4416/JCST2016-00012 Keywords: Thermal shock, damage simulations, multiscale models, effective material properties |
| Microstructure and Electrical Properties of Co-Doped ZnO Varistors S. Hamdelou, K. Guergouri, K. Guergouri Vol. 7, No. 4, Pages 357-364 DOI: 10.4416/JCST2016-00045 Keywords: Co-doped ZnO varistors, microwave sintering, microstructure, electrical properties |
| Microstructure and Mechanical Properties of Al2O3-C Refractories Using Carbon Black and Multi-Walled Carbon Nanotubes as Carbon Sources Y. W. Li, N. Liao, S. B. Sang, H. Peng Vol. 6, No. 3, Pages 207-214 DOI: 10.4416/JCST2015-00003 Keywords: Mechanical properties, thermal shock resistance, Al2O3-C refractories, nano carbon black, MWCNTs |
| Microstructure and Mechanical Properties of Cf/SiC Composites Reinforced with Boron Nitride Nanowires G. Zhu, G. Zhu, G. Zhu, S. Dong, S. Dong, J. Hu, J. Hu, Y. Kan, Y. Kan, L. Gao, L. Gao, X. Zhang, X. Zhang, Z. Wang, Z. Wang, Y. Ding, Y. Ding Vol. 8, No. 1, Pages 31-38 DOI: 10.4416/JCST2016-00064 Keywords: Ceramic matrix composites, boron nitride nanowires, bending test, microindentation, toughness |
| Microstructure and Mechanical Properties of Hot-Pressed Alumina – 5 vol% Zirconia Nanocomposites F. Kern Vol. 2, No. 1, Pages 69-74 DOI: 10.4416/JCST2010-00038 Keywords: Nanocomposites, ZTA, sintering, microstructure, zirconia, alumina |
| Microstructure and Mechanical Properties of Ternary Ceramic Composites with a ZrC-SiC Matrix B.X. Ma, S.H. Xu Vol. 7, No. 4, Pages 335-340 DOI: 10.4416/JCST2016-00039 Keywords: ZrC-SiC, ZrSi2, microstructure, mechanical properties |
| Microstructure and Phase Evolution of Cement-Bonded High-Alumina Refractory Castables for Porous Purging Plugs Q. Wang, Y. Li, N. Xu, R. Xiang, S. Li Vol. 9, No. 1, Pages 1-6 DOI: 10.4416/JCST2017-00044 Keywords: Cement, porous purging plug, microstructure, phase evolution, pore size distribution |
| Microstructure and Properties of Carbon Block Refractories Containing Thermally Oxidized Anthracite for Blast Furnaces T. Wang, S. Sang, Y. Li, Y. Xu, Q. Wang Vol. 9, No. 1, Pages 85-92 DOI: 10.4416/JCST2017-00081 Keywords: Thermally oxidized anthracite, microstructure, thermal conductivity, carbon block refractories |
| Microstructure, Growth Kinetics and Formation Mechanism of Oxide Layers on AlN Ceramic Substrates Ye Cao, Haixian Xu, Jun Zhan, Hao Zhang, Song Cui, Wenming Tang Vol. 9, No. 3, Pages 263-270 DOI: 10.4416/JCST2018-00011 Keywords: AlN ceramic substrate, oxidation, microstructure, kinetics, formation mechanism |
| Microstructure, Mechanical and Tribological Behaviour of TaC-SiC Composites H. Chen, Z. Wu, W. Hai, W. Hai, W. Hai, L. Liu, L. Liu, L. Liu, F. Qin, X. Sun, T. Luo, W. Sun, W. Sun, W. Sun Vol. 12, No. 1, Pages 9-18 DOI: 10.4416/JCST2020-00021 Keywords: Composites, wear resistance, carbides, wear mechanism |
| Microwave Dielectric Properties of (1-x)CaTiO3-x(Na0.5Nd0.5)TiO3 Ceramics A.E. Reda, D.M. Ibrahim, D.A. Abdel Aziz Vol. 7, No. 3, Pages 243-248 DOI: 10.4416/JCST2015-00083 Keywords: Microwave, dielectric properties, calcium titanate, sodium neodymium titanate |
| Miniature Low-Pass Filters in Low-Loss 9k7 LTCC Steve Dai, Lung-Hwa Hsieh Vol. 6, No. 4, Pages 325-328 DOI: 10.4416/JCST2015-00033 Keywords: Low-temperature cofired ceramics (LTCC), multilayer, miniature low-pass filter. |
| Mixed-Mode Fracture Criterion of Short Carbon Fiber-Dispersed SiC Matrix Composite R. Inoue, J.-M. Yang, J.-M. Yang, H. Kakisawa, Y. Kagawa, Y. Kagawa Vol. 8, No. 2, Pages 223-232 DOI: 10.4416/JCST2016-00108 Keywords: Composite, carbon fiber, SiC, toughness, mixed mode |
| Modelling the Wear of MC 98/15 Refractory Material in the Slag Spout Zone of an Oxygen Converter with the Use of Artificial Neural Networks W. Zelik, R. Lech, S. Sado, A. Labuz, A. Lasota, S. Lis Vol. 11, No. 2, Pages 81-90 DOI: 10.4416/JCST2020-00009 Keywords: Refractories, MgO-C, BOF converter, artificial neural network, statistical analysis |
| Monitoring Damage Accumulation in Continuous Fiber-Reinforced Ceramic-Matrix Composites with Different Fiber Preforms under Cyclic Loading Using Hysteresis-Based Damage Parameters Li Longbiao Vol. 9, No. 3, Pages 235-262 DOI: 10.4416/JCST2018-00010 Keywords: Ceramic-matrix composites (CMCs), damage accumulation, matrix cracking, interface debonding, hysteresis loops. |
| Mullitization of Manganese-Doped Aluminosilicate Diphasic Gel J. Roy, S. Das, S. Maitra Vol. 5, No. 4, Pages 299-308 DOI: 10.4416/JCST2014-00016 Keywords: Sol-gel method, ceramics, differential thermal analysis, scanning electron microscopy, x-ray diffraction |
| Nanomaterials and Ceramic Nanoparticles – Use without Side-Effects? M. Roesslein, V. Richter, P. Wick, H. F. Krug Vol. 4, No. 2, Pages 123-130 DOI: 10.4416/JCST2012-00038 Keywords: Ceramic nanoparticles, health risks, toxicology, comparability, standardization |
| Nanoscopic Metal Fluorides as Promising Sintering Aids for High-Performance Alumina Ceramics Ch. Stosiek, H. Ludwig, U. Reichel, G. Scholz, E. Kemnitz Vol. 2, No. 1, Pages 31-38 DOI: 10.4416/JCST2010-00023 Keywords: Transparent, hard alumina ceramic, nano magnesium fluoride, nano aluminium fluoride,mechanical strength, sintering additive |
| Nanospecific Guidance in REACH: A Comparative Physical-Chemical Characterization of 15 Materials with Methodical Correlations W. Wohlleben, L. Ma-Hock, V. Boyko, G. Cox, H. Egenolf, H. Freiberger, B. Hinrichsen, S. Hirth, R. Landsiedel Vol. 4, No. 2, Pages 93-104 DOI: 10.4416/JCST2012-00045 Keywords: Suspension, size distribution, dissolution, photocatalysis, regulation |
| Nb2AlC-Particle-Reinforced ZrO2-Matrix Composites M. Stumpf, J. Biggemann, T. Fey, T. Fey, K. Kakimoto, P. Greil Vol. 9, No. 3, Pages 271-278 DOI: 10.4416/JCST2018-00013 Keywords: Nb2AlC, ZrO2, particle composite, toughness |
| New Approach Identifying Corrosion Effects besides Standardized Materials Testing V. Hopp, A. Masoudi, A. Sax, P. Quirmbach Vol. 6, No. 1, Pages 47-54 DOI: 10.4416/JCST2014-00039 Keywords: Acid-resistant putties, corrosion, Dynamic Mechanical Analysis |
| New Si/B/N/C Ceramics from a Silaborazine-Type Single-Source Precursor H. Cakmak, M. Jansen Vol. 2, No. 1, Pages 23-30 DOI: 10.4416/JCST2010-00044 Keywords: Silaborazine, single-source precursor, pre-ceramic polymer, precursor-derived ceramic, Si/B/N/C ceramics |
| Novel Cement-Ceramic Encapsulation Material for Electronic Packaging S. Kaessner, S. Kaessner, N. Wichtner, F. Hueller, C. Berthold, K. G. Nickel Vol. 9, No. 4, Pages 381-390 DOI: 10.4416/JCST2018-00024 Keywords: Cement-ceramic encapsulation, CAC, processing, dehydration, electronic packaging |
| Novel Ceramic Composites for Personalized 3D Structures M. Ahlhelm, E. Schwarzer, U. Scheithauer, T. Moritz, A. Michaelis Vol. 8, No. 1, Pages 91-100 DOI: 10.4416/JCST2016-00093 Keywords: Bioceramics, bone replacement materials, freeze foaming, LCM, hybrid shaping |
| Novel Low-Permittivity, Low-Sintering-Temperature Na2WO4 Microwave Dielectric Ceramics for LTCC Applications H.L. Dong, H.L. Dong, C.X. Hu, C.X. Hu, W.J. Wang, H.P. Bao, W.J. Liu, B. Yang, B. Yang Vol. 9, No. 4, Pages 471-476 DOI: 10.4416/JCST2018-00034 Keywords: Microwave dielectric properties, low sintering temperature, Na2WO4, reactive sintering process |
| Numerical Investigation into the Influence of Thickness Ratio and Lateral Size of Ceramic on the Ballistic Performance of Ceramic/Metal Armor L. Dou, L. Dou, L. He, Y. Yin, Y. Li Pages 1-18 DOI: 10.4416/JCST2023-00004 Keywords: Penetration, ballistic performance, ballistic limit, thickness ratio, lateral size |
| Numerical Prediction of Effective Thermal Conductivity of Refractory Materials: Methodology and Sensitivity Analysis R. Zehmisch, C. Demuth, A. Al-Zoubi, M.A.A. Mendes, F. Ballani, S. Ray, D. Trimis Vol. 5, No. 2, Pages 145-154 DOI: 10.4416/JCST2013-00041 Keywords: Effective thermal conductivity, refractory materials, thermal lattice-Boltzmann method, random sequential adsorption, sensitivity analysis |
| Numerical Two-Scale Simulations of Damage Evolution at Refractory Materials D. Henneberg, A. Ricoeur Vol. 5, No. 2, Pages 83-92 DOI: 10.4416/JCST2013-00034 Keywords: |
| On the Synthesis of Low-Cost, Titanium-Based MXenes C. Li, S. Kota, C. Hu, M.W. Barsoum Vol. 7, No. 3, Pages 301-306 DOI: 10.4416/JCST2016-00042 Keywords: MAX phase, MXene, ceramics, 2D materials, nanomaterials |
| Optical Properties of a Thermochromic Film Fabricated with Nanoporous Monoclinic VO2 Particles D. Jung, U. Kim, K. Hwang Vol. 11, No. 2, Pages 73-80 DOI: 10.4416/JCST2020-00004 Keywords: Vanadium dioxide, thin film, optical transparency, thermochromic effect, NIR protection |
| Optimisation of a Urea Selective Catalytic Reduction System with a Coated Ceramic Mixing Element M.A. Damm, M. Sauerborn, T. Fend, U. Herrmann Vol. 8, No. 1, Pages 19-24 DOI: 10.4416/JCST2016-00056 Keywords: Selective catalytic reduction system, selective catalytic reduction catalyst, mixing element, porous ceramic polyurethane foam |
| Optimization of Nanoparticulate Indium Tin Oxide Slurries for the Manufacture of Ultra-Thin Indium Tin Oxide Coatings with the Slot-Die Coating Process M. Wegener, K. Riess, A. Roosen Vol. 7, No. 1, Pages 29-38 DOI: 10.4416/JCST2015-00026 Keywords: Nanoparticulate indium tin oxide (ITO), slot-die coating technology, nanocomposite polyvinyl butyral (PVB), polyvinyl pyrrolidone (PVP) |
| Optimization of the Heat Treatment Process for Preparing Light-Green Glass-Ceramics from Blast Furnace Slag Yi-ci Wang, Rui-xin Wang, Yi-fan Wang, Jia Liu, Yi-fan Chai, Guo-ping Luo Vol. 12, No. 2, Pages 63-70 DOI: 10.4416/JCST2021-00002 Keywords: Blast furnace slag, light-green glass-ceramic, orthogonal design; heat treatment, microstructure |
| Oxidative Crack Healing in Al2O3 Composites Loaded with Ti2AC (A = Al, Sn) Repair Fillers B.J. Pedimonte, G. Bei, D. Pourjafar, T. Fey, P. Greil Vol. 5, No. 1, Pages 63-68 DOI: 10.4416/JCST2013-00044 Keywords: MAX phase composites, crack healing, repair filler, alumina, oxidation |
| Particle Size Effect on the Electrical Properties of Spark-Plasma-Sintered Relaxor Potassium Sodium Niobate Ceramic C. Wang, J. Chen, L. Shen, J. Rui, X. Yang, M. Zhu, Y. Hou Vol. 8, No. 2, Pages 255-258 DOI: 10.4416/JCST2016-00116 Keywords: Lead-free piezoelectric ceramics, potassium sodium niobate, submicron-grained, dielectric relaxation, electrical properties. |
| PEG-Assisted Synthesis of Manganese Oxide Nanorods and Their Application as Electrode Material for Lithium-Ion Batteries P. Ragupathy, J. Sundaramurthy, P. Suresh Kumar, V. Thavasi, S. Ramakrishna Vol. 4, No. 3, Pages 157-162 DOI: 10.4416/JCST2013-00007 Keywords: Manganese oxide, nanorods, lithium-ion batteries |
| Performance and Stability of Mixed Conducting Composite Membranes Based on Substituted Ceria U. Pippardt, J. Böer, Ch. Bollert, A. Hoffmann, M. Heidenreich, R. Kriegel, M. Schulz, A. Simon Vol. 5, No. 4, Pages 309-316 DOI: 10.4416/JCST2014-00014 Keywords: Oxygen separation, mixed conductor, CO2 stability, composites, ceria |
| Phase Evaluation of YSZ upon Doping with Ta5+, Ti4+ and Ca2+ with Combined Raman and XRD Analysis A. Bhattacharya, T. Wermelinger, V. Shklover Vol. 3, No. 4, Pages 211-214 DOI: 10.4416/JCST2012-00028 Keywords: TBC, YSZ, Raman spectroscopy, XRD, ZrO2 |
| Phase Relations in the SiC-Al2O3-Pr2O3 System W. Pan, L. Wu, Y. Jiang, Z. Huang Vol. 7, No. 4, Pages 433-440 DOI: 10.4416/JCST2016-00073 Keywords: Pr2O3, SiC, phase equilibrium, solid-state reacted |
| Phase Transformation of 10Li2O-9MnO2-16Fe2O3-15CaO-5P2O5-5Al2O3-40SiO2 Glass H.-Z. Cheng, H.-J. Lin, C.-S. Hsi, C.-F. Wang, M.-C. Wang, H. Jiang, C.-J. Li, P. Lu Vol. 4, No. 3, Pages 151-156 DOI: 10.4416/JCST2013-00005 Keywords: LMFCPAS glass, crystallization behavior, lath form |
| Photoactive TiO2 Nanopowder Synthesized at Low Temperature without a Catalyst J.-P. Nikkanen, E. Huttunen-Saarivirta, T. Kanerva, T. Kivelä, E. Levänen, T. Mäntylä Vol. 2, No. 2, Pages 97-102 DOI: 10.4416/JCST2011-00008 Keywords: Sol-gel processes, titanium dioxide, anatase, grain growth, calcination |
| Photocatalytic Properties of Nanocrystalline TiO2 coupled with Up-Conversion Phosphors S. Mavengere, H. M. Yadav, J.-S. Kim Vol. 8, No. 1, Pages 67-72 DOI: 10.4416/JCST2016-00089 Keywords: Up-conversion phosphor, NaYF4:(Yb3+, Er3+), TiO2,photocatalysis, visible-light photo-reaction |
| Plots of Surface Temperature and Mass of a Heated, Large Limestone Sample in Terms of Regression Splines and the Programming Language R R. Lech, S. Sado Vol. 13, No. 2, Pages 65-82 DOI: 10.4416/JCST2021-00015 Keywords: Limestone, thermal dissociation, thermal analysis, statistical modelling, regression splines |
| Polymer-Derived Ordered Mesoporous Silicon-Boron-Carbon-Nitrogen (Si/B/C/N) Ceramics S. Bernard, P. Miele Vol. 4, No. 2, Pages 113-122 DOI: 10.4416/JCST2013-00001 Keywords: SiBCN, mesoporous powder, non-oxide ceramics, polymer-derived ceramics, nanostructured ceramics |
| Porous Geopolymer Components through Inverse Replica of 3D Printed Sacrificial Templates G. Franchin, P. Colombo, P. Colombo Vol. 6, No. 2, Pages 105-112 DOI: 10.4416/JCST2014-00057 Keywords: Geopolymers, solid freeform fabrication, fused deposition modeling, inverse replica, 3D printing |
| Porous Si-SiC Ceramics Derived by Oxidation from C/C-Si-SiC Composites V.K. Srivastava, W. Krenkel, V.J.A. D'Souza, H.W. Mucha Vol. 2, No. 2, Pages 111-118 DOI: 10.4416/JCST2011-00007 Keywords: C/C-SiC composite, Si-SiC porous ceramic, oxidation, open porosity |
| Porous TiO2-Y2O3 Ceramics with Specific Infrared-Optical Properties G. Steinborn, G. Tzschichholz, J. Guenster, M.H. Keller, J. Manara Vol. 2, No. 3, Pages 183-190 DOI: 10.4416/JCST2011-00011 Keywords: Oxide ceramic, porosity, mean pore diameter, infrared optical properties, emissivity |
| Powder Modification Technology and Preparation of MgAl2O4 Transparent Ceramics by Hot Pressing L. Guo, Y. Zhao, S. Xu, H. Shi, A. Zheng, Y. Ma Vol. 13, No. 2, Pages 113-120 DOI: 10.4416/JCST2022-00007 Keywords: Powder modification technology, powder characterization, MgAl2O4 transparent ceramics, optical properties, hot pressing |
| Practical Colloidal Processing of Multication Ceramics N.S. Bell, T.C. Monson, C. DiAntonio, Y. Wu Vol. 7, No. 1, Pages 1-28 DOI: 10.4416/JCST2015-00025 Keywords: Colloids, ceramic processing, dispersions, spark plasma sintering |
| Prediction of Effective Thermal Conductivity of Refractory Materials at High Temperatures based on Synthetic Geometry Generation C. Demuth, J. Hubálková, M.A.A. Mendes, M.A.A. Mendes, F. Ballani, D. Trimis, D. Trimis, S. Ray Vol. 7, No. 2, Pages 183-192 DOI: 10.4416/JCST2016-00006 Keywords: Effective thermal conductivity, refractory materials, random sequential adsorption, finite volume method, thermal contact resistance |
| Preparation and Characterization of Hydroxyapatite/Alumina Nanocomposites by High-Energy Vibratory Ball Milling A. E. Hannora Vol. 5, No. 4, Pages 293-298 DOI: 10.4416/JCST2014-00019 Keywords: Mechanical alloying, hydroxyapatite, alumina and nanocomposite materials. |
| Preparation and Characterization of Reticulated Porous Mullite Coated with Radar-Absorbing Material S. Lee, S. Lee, J.-H. Ha, J. Lee, I.-H. Song, B. Park, S. B. Lee, S.-H. Kwon Vol. 11, No. 1, Pages 62-72 DOI: 10.4416/JCST2019-00076 Keywords: Reticulated porous ceramics, mullite, carbon, cobalt, radar-absorption properties |
| Preparation of Ceramic Nanoparticles by CO2 Laser Vaporization H.-D. Kurland, J. Grabow, Chr. Stötzel, F.A. Müller Vol. 5, No. 4, Pages 275-280 DOI: 10.4416/JCST2014-00025 Keywords: Laser vaporization, ceramic nanoparticles, photoluminescence, Al2O3-ZrO2, magnetic nanoparticles |
| Preparation of CuAlO2 Thin Films by Radio Frequency Magnetron Sputtering and the Effect of Sputtering on the Target Surface T. Ehara, T. Ehara, R. Iizaka, M. Abe, K. Abe, T. Sato Vol. 8, No. 1, Pages 7-12 DOI: 10.4416/JCST2016-00066 Keywords: Transparent conductive oxide, sputtering, ceramic thin films, phase transformation reaction, properties |
| Preparation of glass-ceramics in the MgO-Al2O3-SiO2 system via low-Temperature combustion synthesis technique Y. He, J. M. Guo, G. W. Zhang, X. L. Chen, J. C. Zhang, Z. L. Huang, G. Y. Liu, Q. Cai Vol. 6, No. 3, Pages 201-206 DOI: 10.4416/JCST2015-00004 Keywords: Cordierite-based glass ceramics, low-temperature combustion synthesis, crystallization process, sintering behavior, electronic packaging |
| Preparation of Lithium Disilicate Glass-Ceramics as Dental Bridge Material Z. Khalkhali, B. Eftekhari Yekta, V.K. Marghussian Vol. 5, No. 1, Pages 39-44 DOI: 10.4416/JCST2013-00030 Keywords: Lithium disilicate, glass ceramic, dental |
| Preparation of Si-C-O Ceramic Fibers from Commercial Silicon Resin H. Li, Y. Gou, H. Wang, K. Jian Vol. 9, No. 4, Pages 427-434 DOI: 10.4416/JCST2018-00040 Keywords: Si-C-O ceramic fibers, silicon resin, precursor, low cost, UV curing |
| Preparation of SiC Ceramics by Laminated Object Manufacturing and Pressureless Sintering H. Zhong, H. Zhong, X. Yao, Y. Zhu, J. Zhang, D. Jiang, J. Chen, Z. Chen, X. Liu, Z. Huang Vol. 6, No. 2, Pages 133-140 DOI: 10.4416/JCST2014-00049 Keywords: LOM, SiC, tape casting, binder removal, pressureless sintering, mechanical properties |
| Preparation of Transparent Microspheres in the K0.5Na0.5NbO3 System by Laser Fusing F.J. Hmood, C. Oelgardt, R. Görke, J.G. Heinrich Vol. 4, No. 1, Pages 41-48 DOI: 10.4416/JCST2012-00040a Keywords: Keywords: Transparent K0.5Na0.5NbO3, laser fusing, kinetic window, crystallization, transmission behavior |
| Preparation of ultra-stable foams stabilized by large-size platelet particles via direct foaming method W. Huo, X. Zhang, B. Ren, J. Liu, D. Wang, J. Yang Vol. 10, No. 1, Pages 39-44 DOI: 10.4416/JCST2018-00073 Keywords: Stable foams, intact diatomite, platelet particles, particle size, multilevel pores |
| Pressureless Sintering of Luminescent CaAlSiN3:Eu Ceramics I. Pricha, W. Rossner, R. Moos Vol. 6, No. 1, Pages 63-68 DOI: 10.4416/JCST2014-00047 Keywords: CaAlSiN3:Eu, pressureless sintering, luminescence properties, LED |
| Processing of All-Oxide Ceramic Matrix Composites with RBAO Matrices P.O. Guglielmi, D.E. García, M.P. Hablitzel, D. Blaese, D.P. Goulart, A. Borchert, D. Hotza, R. Janssen Vol. 7, No. 1, Pages 87-96 DOI: 10.4416/JCST2015-00038 Keywords: Ceramic matrix composites, RBAO, processing, microstructure, properties |
| Processing of Nanostructured Zirconia Composite Ceramics with High Aging Resistance M. Johannes, J. Schneider Vol. 3, No. 3, Pages 151-158 DOI: 10.4416/JCST2012-00015 Keywords: Keywords: Zirconia, Y-TZP, ATZ, ceramic composite, nanostructured ceramics, low-temperature degradation, stirred media mill |
| Processing, Microstructure and Properties of Paper-Derived Porous Al2O3 Substrates C. Kluthe , B. Dermeik , W. Kollenberg , P. Greil , N. Travitzky Vol. 3, No. 3, Pages 111-118 DOI: 10.4416/JCST2012-00008 Keywords: Preceramic paper, calendering, mechanical properties, sintering, porosity |
| Production of β-Silicon Carbide Nanofibers using the Forcespinning® Method A. Salinas, A. Altecor, M. Lizcano, K. Lozano Vol. 7, No. 3, Pages 229-234 DOI: 10.4416/JCST2016-00026 Keywords: Silicon carbide, high-temperature materials, ceramic nanofibers, Forcespinning® |
| Properties of Injection Moulded Alumina-Toughened Zirconia F. Kern, R. Gadow Vol. 2, No. 1, Pages 47-54 DOI: 10.4416/JCST2010-00019 Keywords: ATZ, CIM, platelets, Weibull statistics, toughening |
| RE2SiO5 (RE=Er, Gd, Y, Yb), Which is More Suitable for the Top-Coat of EBCs: A Problem Clarification via Finite Element Simulation Study X.W. Sun, X.W. Sun, X. Zhong, Z.C. Hu, Y. Liu, Y. Yang, L. Wang Vol. 13, No. 1, Pages 45-64 DOI: 10.4416/JCST2021-00021 Keywords: Finite element simulation, environmental barrier coating systems, residual stress, atmospheric plasma spraying, failure mechanism |
| Reaction Heat Utilization in Aluminosilicate-Based Ceramics Synthesis and Sintering M. Karhu, J. Lagerbom, P. Kivikytö-Reponen, A. Ismailov, E. Levänen Vol. 8, No. 1, Pages 101-112 DOI: 10.4416/JCST2016-00094 Keywords: Aluminosilicate ceramics, self-propagating high-temperature synthesis, SHS, exothermic reactions, synthesis, sintering |
| Reinforcement Mechanisms in Yttria-Ceria-Co-Stabilized Zirconia-Alumina-Strontium Hexaaluminate Composite Ceramics F. Kern, A. Gommeringer Vol. 9, No. 1, Pages 93-98 DOI: 10.4416/JCST2017-00046 Keywords: Zirconia, platelets, microstructure, mechanical properties |
| Relationship of Optical Properties and Elastoplastic Characteristics of Transparent Spark-Plasma-Sintered YSZ Ceramics O. L. Khasanov, E. S. Dvilis, Z. G. Bikbaeva, V. D. Paygin, A. O. Khasanov Vol. 8, No. 1, Pages 161-168 DOI: 10.4416/JCST2016-00105 Keywords: YSZ, transparent ceramics, optical properties, mechanical properties, indentation, swelling, spalls, stress relaxation dynamics |
| Relationship of Preparation Parameters and Chromatic Properties of Zircon-Encapsulated Carbon Black Ceramic Pigment Prepared with a Sol-Gel-Spraying Method Q. Wang, Q. Chang, K. Yang, Y. Wang, X. Wang, X. Li, J.-E. Zhou Vol. 8, No. 2, Pages 287-294 DOI: 10.4416/JCST2017-00013 Keywords: Ceramic pigment, zircon, encapsulated pigment, sol-gel-spraying |
| Research on Porcelain Material for Product Design and Manufacturing in Kenya: Assessing SiO2 Al2O3 Content L. Barongo Ayieng'a, A. Wang, X. Lu, Y. Song, M. Watterson Vol. 13, No. 1, Pages 23-30 DOI: 10.4416/JCST2021-00013 Keywords: Keywords: Chemical properties, Kisii soapstone, porcelain technology, product design application, SiO2 Al2O3, slip casting |
| Residual Strength Evolution of 2D C/C-SiC Composites Subjected to Tensile Fatigue Stresses B.-G. Zhang, Y. Li, Y. Li, P. Xiao, W. Zhou, W. Zhou, H. Luo, Z. Li Vol. 8, No. 1, Pages 53-58 DOI: 10.4416/JCST2016-00087 Keywords: C/C-SiC, fatigue, cracking, residual strength |
| Residual Stress Strengthening in Layered Tricalcium Phosphate (TCP) Bioceramics E. Hahn, T. Fey, K. Zuo, D.-L. Jiang, P. Greil Vol. 2, No. 2, Pages 133-138 DOI: 10.4416/JCST2011-00005 Keywords: Calcium phosphate bioceramics, tape-cast laminates, residual stress strengthening |
| Response Surface Methodology for Optimization of the Synthesis of Lithium Ion Conductor Glass-Ceramic Electrolyte H. Kun, Z. Chengkui, L. Baoying, W. Yanhang, H. Bin, C. Jiang Vol. 8, No. 2, Pages 249-254 DOI: 10.4416/JCST2016-00113 Keywords: Glass-ceramic, crystallization parameters, response surface methodology, optimization |
| Robocasting of Alumina Lattice Truss Structures T. Schlordt, F. Keppner, N. Travitzky, P. Greil Vol. 3, No. 2, Pages 81-88 DOI: 10.4416/JCST2012-00003 Keywords: Robocasting, alumina gel, lattice truss structures |
| Room-Temperature Mechanochemical Synthesis and Consolidation of Nanocrystalline HfB2-HfO2 Composite Powders N. Akçamlı, N. Akçamlı, D. Ağaoğulları, Ö. Balcı, M. L. Öveçoğlu, İ. Duman Vol. 9, No. 2, Pages 101-118 DOI: 10.4416/JCST2017-00084 Keywords: HfB2-HfO2 composites, powders, solid state reaction, sintering, microstructure-final, mechanical properties |
| Room-Temperature Structural and Dielectric Properties of Praseodymium-Doped SrBi2Nb2O9 Ceramics M. Afqir, M. Afqir, A. Tachafine, D. Fasquelle, M. Elaatmani, J.-C. Carru, A. Zegzouti Vol. 9, No. 2, Pages 209-214 DOI: 10.4416/JCST2018-00004 Keywords: SrBi2Nb2O9, Pr3+/Pr4+, crystal structure, dielectrics |
| Selective Laser Sintering as an Additive Manufacturing Method for Manufacturing Ceramic Components M. Ahlhelm, H.-J. Richter, K. Haderk Vol. 4, No. 1, Pages 33-40 DOI: 10.4416/JCST2012-00024 Keywords: Selective Laser Sintering (SLS), ceramic, silicon carbide, hydroxyapatite |
| SiC/BN Composites by Spark Plasma Sintering (SPS) of Precursor-Derived SiBNC Powders J. Wilfert, K. Meier, K. Hahn, Y. Grin, M. Jansen Vol. 1, No. 1, Pages 1-6 DOI: 10.4416/JCST2010-00012 Keywords: Precursor-derived ceramics, composites, microstructure analysis, SiC, Spark plasma sintering |
| Silicon Nitride Ceramics with High Thermal Conductivity and Excellent Mechanical Properties Fabricated with MgF2 Sintering Aid and Post-Sintering Heat Treatment F. Hu, F. Hu, L. Zhao, Z.P. Xie Vol. 7, No. 4, Pages 423-428 DOI: 10.4416/JCST2016-00065 Keywords: MgF2 sintering aids, silicon nitride, thermal conductivity, mechanical properties |
| Sintering and Characterization of a Transparent Ferroelectric NaNbO3 Ceramic X. Lin, Z.-F. Li, L.-F. Shu Vol. 8, No. 2, Pages 209-212 DOI: 10.4416/JCST2016-00085 Keywords: Transparent ceramics, NaNbO3, transmission, ferroelectric properties |
| Sintering and High-Temperature Strength of (Ti,Hf,Ta)C Medium-Entropy Ceramics Consolidated by Biphasic Carbide Powders F.L. Qin, F.L. Qin, X.G. Wang, X.F. Wang, Q.Q. Yang, R.Z. Li, W. Gao, C. Zhang, D.Y. Jiang Vol. 14, No. 1, Pages 39-48 DOI: 10.4416/JCST2023-00002 Keywords: Medium-entropy ceramics (Ti,Hf,Ta)C, sluggish diffusion effect, high-temperature flexural strength. |
| Sintering and Mechanical Properties of AlMgB14 Composite Materials M. Herrmann, R. Bodkin, N. J. Coville, I. Sigalas, M. Thiele Vol. 2, No. 1, Pages 55-60 DOI: 10.4416/JCST2010-00020 Keywords: Boride, sintering, microstructure, AlMgB14 |
| Sintering Behaviour of Fine Barium Titanate (BaTiO3) Powders Consolidated with the Pressure Filtration Method Ł. Zych, A. Wajler, A. Kwapiszewska Vol. 7, No. 3, Pages 277-288 DOI: 10.4416/JCST2016-00016 Keywords: Barium titanate, nanopowder, pressure filtration, sintering, transparent ferroelectric ceramics |
| Sintering Behaviour of Mg(AlxFe1-x)2O4 Materials and their Corrosion in Na3AlF6-AlF3-K3AlF6 Electrolyte Y.B. Xu, Y.W. Li, J.H. Yang, S.B. Sang, Q.W. Qin Vol. 8, No. 2, Pages 193-200 DOI: 10.4416/JCST2016-00081 Keywords: Sidewalls, Mg(AlxFe1-x)2O4, dense layer, electrolyte, corrosion resistance |
| Sintering Behaviour of Multilayer Hydroxyapatite Laminates E. Hahn, J. Hum, J. Will, K. Zuo, D. Jiang, P. Greil Vol. 2, No. 1, Pages 61-68 DOI: 10.4416/JCST2010-00034 Keywords: Hydroxyapatite, laminate sintering, aggregated and dispersed powder |
| Sintering Conditions, Microstructure and Properties of Alumina 10 vol% Zirconia Nanocomposites F. Kern Vol. 3, No. 1, Pages 1-8 DOI: 10.4416/JCST2011-00036 Keywords: ZTA, nanocomposite, microstructure, phase composition |
| Sintering of Magnesia and Iron Oxide in Air and Flowing Nitrogen and its Corrosion Process by Molten Electrolyte Y.B. Xu, Y.W. Li, J.H. Yang, S.B. Sang, Q.W. Qin Vol. 7, No. 3, Pages 249-256 DOI: 10.4416/JCST2015-00085 Keywords: Sidewalls, MgO-Fe2O3(FeO), composite spinel, electrolyte, corrosion resistance |
| Slurry Development for Spray Granulation of Ceramic Multicomponent Batches P. Höhne, B, Mieller, T. Rabe Vol. 9, No. 3, Pages 327-336 DOI: 10.4416/JCST2018-00022 Keywords: Slurry optimization, optical centrifugation, destabilization, spray drying, biaxial strength |
| Slurry-Based Powder Beds for the Selective Laser Sintering of Silicate Ceramics T. Mühler, C. Gomes, M.E. Ascheri, D. Nicolaides, J.G. Heinrich, J. Günster, J. Günster Vol. 6, No. 2, Pages 113-118 DOI: 10.4416/JCST2015-00007 Keywords: LSD, powder bed, SLS, additive manufacturing, silicate ceramics |
| Small-Size Low-Loss Bandpass Filters on Substrate-Integrated Waveguide Capacitively Loaded Cavities Embedded in Low Temperature Co-Fired Ceramics V. Turgaliev, D. Kholodnyak, J. Müller, and M.A. Hein Vol. 6, No. 4, Pages 305-314 DOI: 10.4416/JCST2015-00053 Keywords: Substrate-integrated waveguide (SIW), low temperature co-fired ceramics (LTCC), capacitively loaded cavities, dual-mode resonators, bandpass filters. |
| Sol-Gel Synthesis of Strontium Titanate Nanofibers by Electrospinning J. H. Roque-Ruiz, J. Meraz-Angel, R. Farias, M. Meléndez-Lira, S. Y. Reyes-López Vol. 10, No. 1, Pages 29-38 DOI: 10.4416/JCST2018-00072 Keywords: electrospinning, perovskite, sol-gel, strontium titanate. |
| Solid Solution in LnTiO2N and MTaO2N Oxynitrides, Ln = La,Nd; M = Ca, Sr, Ba J. Ahchawarattaworn, D.P. Thompson Vol. 5, No. 3, Pages 173-183 DOI: 10.4416/JCST2014-00003 Keywords: Oxynitrides, perovskites, synthesis, crystal structure, dielectric properties |
| Solid Solutions and Thermal Transformations in Nanosized LaPO4-YPO4-H2O and LaPO4-LuPO4-H2O Systems V. Popova, L. Mezentseva, A. Osipov, V. Ugolkov, I. Kruchinina, A. Yakovlev, T. Maslennikova Vol. 5, No. 3, Pages 237-244 DOI: 10.4416/JCST2014-00013 Keywords: LaPO4-YPO4-H2O and LaPO4-LuPO4-H2O systems, nanopowders, thermal behavior |
| Spray Freeze Granulation of Submicrometre α-Alumina Using Ultrasonication S. Ghanizadeh, P. Ramanujam, B. Vaidhyanathan, J. Binner, J. Binner Vol. 7, No. 4, Pages 455-462 DOI: 10.4416/JCST2016-00078 Keywords: Keywords: Alumina, granulation, spray-freeze drying, two-stage sintering |
| Statistical Optimization of the Binder Mixing Ratio for Fabricating Reliable Ceramic Raschig Rings A. Salem, Y. Beygi Khosrowshahi, S. Aghahosseini Vol. 2, No. 3, Pages 159-168 DOI: 10.4416/JCST2011-00013 Keywords: Raschig ring, extrusion, compressive strength, reliability. |
| Stress and Strain Modeling of Low-Temperature Cofired Ceramic (LTCC) Seal Frame and Lid D. Krueger, J. Porter, K. Peterson Vol. 6, No. 4, Pages 261-266 DOI: 10.4416/JCST2015-00064 Keywords: LTCC, EMI, shielding, isolation, Kovar |
| Structural Studies of Pr Nickelate-Cobaltite – Y-Doped Ceria Nanocomposite V.A. Sadykov, V.A. Sadykov, N.F. Eremeev, Z.S. Vinokurov, Z.S. Vinokurov, A.N. Shmakov, A.N. Shmakov, A.N. Shmakov, V.V. Kriventsov, V.V. Kriventsov, A.I. Lukashevich, A.V. Krasnov, A.V. Ishchenko, A.V. Ishchenko Vol. 8, No. 1, Pages 129-140 DOI: 10.4416/JCST2016-00099 Keywords: Oxygen separation membranes, nanocomposites, synchrotron radiation, oxygen mobility, performance |
| Structural, Electrical and Magnetic Properties of BiFe1-xYxO3 (0 ≤ x ≤ 0.6) Ceramics A.A.A. Najm, A.H. Shaari, H. Baqiah, E. Bin Saion, L.K. Pah, C.S. Kien, M.M.A. Kechik Vol. 7, No. 4, Pages 329-334 DOI: 10.4416/JCST2016-00028 Keywords: Bismuth ferrite ceramic, x-ray diffraction, solid-state reaction, magnetic properties, dielectric properties |
| Structural, Mechanical and Optical Properties of Nanocrystalline (K0.34Na0.65)NbO3.01Thin Films Deposited by RF Sputtering P. Mahesh, D. Pamu Vol. 5, No. 1, Pages 23-30 DOI: 10.4416/JCST2013-00026 Keywords: Thin films, crystal structure, X-ray diffraction, optical properties, mechanical properties |
| Structure Features and Properties of Graphene/Al2O3 Composite E. A. Klyatskina, A. Borrell, E. G. Grigoriev, A. G. Zholnin, M. D. Salvador, V. V. Stolyarov, V. V. Stolyarov Vol. 9, No. 3, Pages 215-224 DOI: 10.4416/JCST2018-00006 Keywords: Graphene, nanocomposite, wear behavior, mechanical properties, SPS |
| Structuring of LTCC Substrates by a Combination of Pressure-Assisted Sintering and Hot Embossing B. Brandt, T. Rabe Vol. 6, No. 4, Pages 273-278 DOI: 10.4416/JCST2015-00051 Keywords: Low-temperature co-fired ceramics, pressure-assisted sintering, glassy carbon, hot embossing, structuring |
| Studies of Adsorption of Pillarized and Organofunctionalized Smectite Clay for Th4+ Removal D.J.L. Guerra, E.S. Menonça, R.A.R. Silva, W. Lara Vol. 3, No. 1, Pages 17-28 DOI: 10.4416/JCST2012-00040 Keywords: Smectite, adsorption isotherms, thorium, thermodynamic, kinetic |
| Study on the Effect of MgO Addition on the Physical, Mechanical and Thermal Properties of Alumina-Zirconia-Carbon Refractories M. Abolfazli, M. Hossein Paydar Vol. 13, No. 1, Pages 9-14 DOI: 10.4416/JCST2021-00009 Keywords: Alumina-carbon composite, refractory, stopper, microstructure, mechanical properties, magnesia |
| Submicrometer Silica Spheres Generated by Laser Fuming C.M. Gomes, R. Müller, J. Günster, T. Mühler, R. Görke, J.G. Heinrich Vol. 4, No. 1, Pages 11-18 DOI: 10.4416/JCST2012-00033 Keywords: Laser, SiO2, nanopowder |
| Superhydrophilic Ceramic Glazes for Sanitaryware F. Knies, F. Knies, K. Schrantz, K. Schrantz, C. Aneziris, L. Gauckler, T. Graule, T. Graule Vol. 7, No. 1, Pages 53-64 DOI: 10.4416/JCST2015-00024 Keywords: Glaze, superhydrophilicity, photoactivity, UV irradiation, ZnO, TiO2 |
| Surface Modification of Alumina Powder to Prevent Exfoliation of Samples Fabricated by Gelcasting A. Wieclaw-Midor, P. Wiecinska, M. Szafran Vol. 9, No. 3, Pages 225-234 DOI: 10.4416/JCST2018-00008 Keywords: Gelcasting, surface modification, alumina, mechanical strength |
| Surface Strengthening of Extrusion-Formed Polymer/Filler-Derived Ceramic Composites L. Schlier, N. Travitzky, J. Gegner, P. Greil Vol. 3, No. 4, Pages 181-188 DOI: 10.4416/JCST2012-00018 Keywords: Polymer derived ceramics, surface strengthening, reaction surface zone |
| Synergistic Effects of Loading Sequences and Phase Angles on Thermomechanical Fatigue Damage Evolution of Silicon-Carbide-Fiber-Reinforced Ceramic-Matrix Composites L. Li Vol. 9, No. 4, Pages 435-464 DOI: 10.4416/JCST2018-00049 Keywords: Ceramic-matrix composites (CMCs), thermomechanical fatigue (TMF), damage evolution, phase angle, loading sequence |
| Synthesis and in vitro Bioactivity Mechanism of Synthetic α-wollastonite and β-wollastonite Bioceramics R. Morsy, R. Abuelkhair, T. Elnimr Vol. 7, No. 1, Pages 65-70 DOI: 10.4416/JCST2015-00028 Keywords: Bioceramics, wollastonite, hydroxyapatite, precipitation, electron resonance |
| Synthesis and Characterization of a Boron-Containing Precursor for ZrB2 Ceramic X. Y. Tao, Z. Xiang, S. Zhou, Y. Zhu, W. Qiu, T. Zhao Vol. 7, No. 1, Pages 107-112 DOI: 10.4416/JCST2015-00041 Keywords: Zirconium diboride, preceramic polymers, boric acid, precursor infiltration pyrolysis |
| Synthesis and Characterization of Mesoporous Sodium Dodecyl Sulfate-Coated Magnetite Nanoparticles R. El-kharrag, A. Amin, Y. E. Greish Vol. 2, No. 4, Pages 203-210 DOI: 10.4416/JCST2011-00021 Keywords: Magnetite nanoparticles, mesoporous, sodium dodecyl sulfate, thermal analysis, magnetic susceptibility |
| Synthesis and Characterization of Nano-/Micro-Crystalline SnO using Microwave and Hydrothermal Techniques A.M. EL-Rafei, H. Youssef, N. M. Ahmed Vol. 5, No. 3, Pages 217-222 DOI: 10.4416/JCST2014-00010 Keywords: Tin oxides, semiconductors, microwaves, nanostructures, chemical synthesis |
| Synthesis and Characterization of Nanoparticulate Crystallite Cobalt Ferrite for Permanent Magnet Applications M.A. Ahmed, N.G. Imam, M.M. Hefny, and H.R. Gomaa Vol. 7, No. 3, Pages 235-242 DOI: 10.4416/JCST2015-00073 Keywords: Nanoparticulate, CoFe2O4, sol-gel precursor, structural, magnetic, dielectric. |
| Synthesis and Characterization of Sol-Gel-Derived Chemical Mullite J. Roy, S. Maitra Vol. 5, No. 1, Pages 57-62 DOI: 10.4416/JCST2013-00046 Keywords: Sol-gel, mullite, FTIR, differential thermal analysis, microstructure |
| Synthesis and Dielectric Properties of Thin-Layered (La,Nd)TiO2N Perovskites J. Ahchawarattaworn, D.P. Thompson, F. Azough, R. Freer Vol. 7, No. 1, Pages 39-46 DOI: 10.4416/JCST2015-00022 Keywords: Oxynitrides, perovskites, XRD characterisation, dielectric properties. |
| Synthesis Conditions of Cobalt Aluminate Nano-Sized Powder Sh. Salem, S.H. Jazayeri, F. Bondioli, A. Allahverdi, M. Shirvani Vol. 2, No. 3, Pages 169-178 DOI: 10.4416/JCST2011-00015 Keywords: Cobalt aluminate, glaze; melting, hot stage microscopy, viscosity |
| Synthesis of Calcium Hexaboride Powder via Boro/Carbothermal Reduction with a Gel Precursor D. Yilmaz Çakta, N. Koç, S. Turan Vol. 7, No. 4, Pages 349-356 DOI: 10.4416/JCST2016-00044 Keywords: Hexaboride, boro/carbothermal reduction, gel precursor, boric acid, mannitol |
| Synthesis of LaCrO3 and La0.9Ca0.1CrO3 by Modified Glycine Nitrate Process A. Bonet, N. Travitzky, P. Greil Vol. 5, No. 2, Pages 93-100 DOI: 10.4416/JCST2013-00024 Keywords: Lanthanum chromite, modified glycine nitrate process, combustion synthesis |
| Synthesis of mesoporous Sr2MgSi2O7:Eu2+, Dy3+ energy storage carriers using cetyl trimethyl ammonium bromide as a template X. Wei, J. Fan, X. Zhou, Y. Shen, X. Hu, G. Zuo Vol. 7, No. 4, Pages 477-482 DOI: 10.4416/JCST2016-00046 Keywords: Keywords: Ceramics, Sr2MgSi2O7:Eu2+, Dy3 , porous materials, energy storage, luminescence |
| Synthesis of PLLA-HA Hybrid Composites with Bone-Like Structure J. Zhang, D. Jiang, Z. Chen, Q. Lin, Z. Huang Vol. 2, No. 1, Pages 39-46 DOI: 10.4416/JCST2010-00030 Keywords: PLLA, HA, hybrid composites |
| Synthesis, Characterization and Luminescence Properties of Pr3+-Doped C12A7 and C3A E. Tõldsepp, E. Feldbach, M. Kirm Vol. 4, No. 2, Pages 77-84 DOI: 10.4416/JCST2012-00039a Keywords: Calcium aluminate, C12A7, C3A, praseodymium, VUV spectroscopy |
| Synthesis, Densification and Characterization of Nanosized Oxide Ceramic Powders with Eutectic Compositions by Heating of Alcohol-Aqueous Salt Solutions J.-H. Ouyang, Y.-H. Ma, A. Henniche, B. Wang, Z.-G. Wang, Y.-J. Wang Vol. 8, No. 1, Pages 81-90 DOI: 10.4416/JCST2016-00097 Keywords: Al2O3-ZrO2(Y2O3) ceramic, Al2O3-SmAlO3 ceramic, co-precipitation, microstructure morphology, mechanical properties |
| Synthesis, Microstructure and Dielectric Properties of (Sr,Bi)TiO3 Borosilicate Glass-Ceramics C.R. Gautam, C.R. Gautam, C.W. Manpoong, S.S. Gautam, A.K. Singh, A. Madheshiya, M. Tamuk Vol. 7, No. 1, Pages 79-86 DOI: 10.4416/JCST2015-00035 Keywords: (Sr,Bi)·TiO3, XRD, molar volume, SEM, TEM, dielectric properties, contact angle |
| Synthesis, Phase Evolutions, and Properties of the Perovskite Ba6Ca2Ti2Nb3O19.5 Zh. Pan, H. Wei, J. Xu, L. Fang, X. Kuang Vol. 14, No. 1, Pages 25-30 DOI: 10.4416/JCST2022-00013 Keywords: Ba6Ca2Ti2Nb3O19.5, simple cubic perovskite, B-site disorder, high permittivity, alternating current impedance. |
| Tape Casting of Si3N4 Sheets for Potential Use as Circuit Substrate for Power Devices J. Zhang, Y. Duan, X. Li, D. Jiang Vol. 8, No. 1, Pages 149-154 DOI: 10.4416/JCST2016-00120 Keywords: Silicon nitride, tape casting, thermal conductivity |
| Technology for the Obtainment of Transparent MgAl2O4 Spinel Parts A. Goldstein, A. Goldenberg, M. Vulfson Vol. 2, No. 1, Pages 1-8 DOI: 10.4416/JCST2010-00018 Keywords: Spinel, transparent, ceramic, sintering, armor |
| The Compositions and Pore Structures of Benshanzhu Zisha Ceramics Yu Lin, Chunyan Hu, Defang Ding, Haidong Hang, Chunrui Yang, Yuanbing Li, Yi Shen Vol. 12, No. 2, Pages 107-114 DOI: 10.4416/JCST2021-00004 Keywords: Zisha, traditional ceramics, Yixing, pore structures |
| The Corrosion of Mg-Partially Stabilized Zirconia During Service in Continuous Casting Tundish K. Wiśniewska, D. Madej, J. Szczerba Vol. 9, No. 3, Pages 301-308 DOI: 10.4416/JCST2018-00019 Keywords: Mg-stabilized zirconia, corrosion, steel casting, refractories |
| The Effect of Different La-Containing Starting Materials on the Synthesis, Sintering, and Li+-Conductivity of Li3xLa2/3-xTiO3 A.C. Sutorik, C. Cooper, M.D. Green, J. Wolfenstine, G. Gilde Vol. 4, No. 2, Pages 59-68 DOI: 10.4416/JCST2012-00035 Keywords: Keywords: Li+-conducting ceramic, Li-air battery, ceramic electrolyte, lithium lanthanum titanate |
| The Effect of Nano CuO as Sintering Aid on Phase Formation, Microstructure and Properties of Li2O-Stabilized β″-Alumina Ceramics H. Ahmadi Moghadam, M. Hossein Paydar Vol. 7, No. 4, Pages 441-446 DOI: 10.4416/JCST2016-00075 Keywords: Keywords: β″-alumina ceramics, nano CuO, microstructure, mechanical properties, ionic conductivity |
| The Effect of Sintering Temperature on the Phase Composition and Mechanical Properties of Al2O3-TiC-TiN Ceramic Tool Materials Yuhuan Fei, Yuhuan Fei, Chuanzhen Huang, Chuanzhen Huang, Hanlian Liu, Tianen YANG, Jikang XU Vol. 12, No. 2, Pages 97-106 DOI: 10.4416/JCST2020-00028 Keywords: Al2O3-TiC-TiN, sintering temperature, phase composition, mechanical properties |
| The Effect of the Glass Phase on the Modulus of Rupture of High-Alumina Refractories W. Yuan, Q. Zhu, C. Deng, H. Zhu Vol. 6, No. 3, Pages 215-220 DOI: 10.4416/JCST2015-00009 Keywords: Modulus of rupture, high-alumina refractories, glass phase |
| The Effect of the P/Si Ratio on the Preparation and Properties of Phosphoric Acid-Metakaolin Geopolymers E. Furlani, E. Aneggi, A. Rondinella, M. Zanocco, L. Fedrizzi, S. Maschio Vol. 12, No. 1, Pages 19-28 DOI: 10.4416/JCST2020-00022 Keywords: Geopolymers, phosphoric acid, workability, FTIR, pore size distribution |
| The Effect of the SiO2/Na2O Ratio in the Structural Modification of Metakaolin-Based Geopolymers Studied by XRD, FTIR and MAS-NMR G.M. Nasab, F. Golestanifard, F. Golestanifard, K.J.D. MacKenzie Vol. 5, No. 3, Pages 185-192 DOI: 10.4416/JCST2014-00007 Keywords: Geopolymer, alkali activation, NMR spectroscopy, composition design, metakaolin |
| The Effect of Thermal Treatment on Tensile Properties of Basalt Fibers S.M.M. Sabet, F. Akhlaghi, R. Eslami-Farsani Vol. 6, No. 3, Pages 245-248 DOI: 10.4416/JCST2014-00053 Keywords: Basalt fibers, monofilament, bundle, tensile and residual strength. |
| The Effects of Eu2O3 Additive Amounts and Addition Methods on the Synthesis of β-SiAlON Multiphase Materials from Fly Ash Acid Slag Kuizhou Dou, Yinshan Jiang, Bing Xue, Cundi Wei, Fangfei Li Vol. 12, No. 1, Pages 1-8 DOI: 10.4416/JCST2020-00017 Keywords: SiAlON, fly ash, carbothermal reduction, nitridation, Eu2O3 |
| The Effects of Nano Mgo on Physical and Mechanical Properties of Al2O3-SiC Composites A. Nemati, F. Surani, H. Abdizadeh, and H.R. Baharvandi Vol. 3, No. 1, Pages 29-34 DOI: 10.4416/JCST2012-00034 Keywords: Keywords: Nanocomposite, sintering, additive, mechanical properties, microstructure |
| The Influence of Al and Si Additives on the Microstructure and Mechanical Properties of Low-Carbon MgO-C Refractories T.B. Zhu, Y.W. Li, S.B. Sang, S.L. Jin Vol. 7, No. 1, Pages 127-134 DOI: 10.4416/JCST2015-00055 Keywords: In-situ-formed ceramic phases, mechanical properties, thermal shock resistance, MgO-C refractories |
| The Influence of Order in the Cation Sublattice of MgAl2O4, MgCr2O4 and MgFe2O4 Spinels on the Kinetics of Topochemical Reactions with Sulphur Oxides A. Gerle, J. Piotrowski, J. Podwórny Vol. 8, No. 2, Pages 183-192 DOI: 10.4416/JCST2016-00077 Keywords: Order-disorder transformation, spinel, corrosion, refractories, sulphur oxides |
| The Influence of Stabilizer Concentration on the Mechanical Properties of Alumina – 17 vol% Zirconia (0.6Y-2Y) Composites F. Kern, S. Koummarasy, R. Gadow Vol. 7, No. 3, Pages 295-300 DOI: 10.4416/JCST2016-00034 Keywords: Ceramics, mechanical properties, zirconia, alumina, residual stress |
| The Influence of the Coarse Fraction on the Porosity of Refractory Castables J. Fruhstorfer, C.G. Aneziris Vol. 5, No. 2, Pages 155-166 DOI: 10.4416/JCST2013-00043 Keywords: Refractory castables, coarse fraction, flowability, density, pore size distribution |
| The Interaction of Stacking Faults and the Doping of Si in TiC Q. Liu, F.G. Qi, X.L. Wang, H.M. Ding, Y. Shi Vol. 8, No. 4, Pages 493-498 DOI: 10.4416/JCST2017-00027 Keywords: Defects, ceramic, vacancies, simulation. |
| The Phase Composition and Mechanical Properties of Al2O3-TiN-TiC Ceramic Materials with Different Ni Content Y. Fei, Ch. Huang, H. Liu Vol. 10, No. 2, Pages 1-8 DOI: 10.4416/JCST2019-00012 Keywords: Al2O3-TiN-TiC ceramic, Ni content, phase composition, mechanical properties |
| The Role of Bioinorganics in Improving the Mechanical Properties of Silicate Ceramics as Bone Regenerative Materials H. Mohammadi, M. Sepantafar, M. Sepantafar, A. Ostadrahimi Vol. 6, No. 1, Pages 1-8 DOI: 10.4416/JCST2014-00043 Keywords: Calcium silicate, mechanical properties, trace element, bone regeneration |
| The Role of Pore-Formers on Grain Interior and Grain Boundary Conductivity in Tape-Cast Porous Sheets for Electrochemical Flue Gas Purification C. Grings Schmidt, K.B. Andersen, E. Stamate, A. Kaiser, K. Kammer Hansen Vol. 8, No. 4, Pages 485-492 DOI: 10.4416/JCST2017-00024 Keywords: CGO, tape casting, EIS, conductivity |
| The Role of Powder Preparation Method in Enhancing Fracture Toughness of Zirconia Ceramics with Low Alumina Amount I. Danilenko, T. Konstantinova, G. Volkova, V. Burkhovetski, V. Glazunova Vol. 6, No. 3, Pages 191-200 DOI: 10.4416/JCST2015-00020 Keywords: Keywords: 3Y-TZP, fracture toughness, composite, Al2O3, structure characterization |
| The Synthesis of Multi-Layer Silver, Copper and Aluminum Thick Films on Alumina Substrates using a Screen-Printing Method Jun Fang, Jun Fang, Renli Fu, Xiguang Gu, Xinyao Zhang, Guojun Li Vol. 11, No. 2, Pages 103-110 DOI: 10.4416/JCST2020-00012 Keywords: Multi-layer, silver, copper, aluminum, screen printing |
| Thermal Evolution of Calcium Aluminate Gel S. Kurajica, V. Mandic, J. Sipusic Vol. 2, No. 1, Pages 15-22 DOI: 10.4416/JCST2010-00017 Keywords: Calcium aluminate, sol-gel, thermal evolution, crystallization, non-isothermal kinetics. |
| Thermal Oxidation of Sintered Silicon Carbide Used for Diesel Particulate Filter Walls T. Thomé, M. Capelle, L. Thomé, T. Prenant, M. Néret Vol. 3, No. 2, Pages 89-94 DOI: 10.4416/JCST2012-00006 Keywords: SiC, SiO2, thermal properties, oxycarbide, oxidation |
| Thermal Shock and Thermo-Mechanical Behavior of Carbon-Reduced and Carbon-Free Refractories A. Böhm, S. Dudczig, J. Fruhstorfer, A. Mertke, C.G. Aneziris, J. Malzbender Vol. 7, No. 2, Pages 155-164 DOI: 10.4416/JCST2015-00081 Keywords: Ceramics, refractories, thermal shock, wedge splitting test, electron beam |
| Thermal Shock Performance of Refractories for Application in Steel Ingot Casting J. Fruhstorfer, S. Schafföner, J. Werner, T. Wetzig, L. Schöttler, C.G. Aneziris Vol. 7, No. 2, Pages 173-182 DOI: 10.4416/JCST2016-00010 Keywords: Thermal shock resistance, nanoadditives, mullite, alumina-titania-zirconia, fused raw material |
| Thermal Shock Resistance of ZrB2-MoSi2-SiC High-Temperature Ceramics Prepared by Spark Plasma Sintering Y. Zhang, Y. Zhang, J. Li, W. Liu, W. Liu, L. Zhang, L. Zhang, P. Zhu, P. Zhu, X. Yi, X. Yi, S. Wei, G. Zhang, L. Jie, K. Pan, J. Shen Vol. 12, No. 1, Pages 49-58 DOI: 10.4416/JCST2020-00015 Keywords: Keywords: ZrB2-MoSi2-SiC ceramics, SiC additive, thermophysical parameters, thermal shock resistance, oxide layers |
| Thermochemical Calculations of the Stability of Ti2AlC in Various Atmospheres M. Stumpf, T. Fey, P. Greil Vol. 7, No. 3, Pages 223-228 DOI: 10.4416/JCST2016-00029 Keywords: MAX phase, thermochemical calculations, atmosphere stability |
| Thermography and Complementary Measurements as Tools to Detect Micro-Irregularities in Electronic Components S. Röhrig, S. Röhrig, I. Petschenig, I. Petschenig, R. Bermejo, M. Hofstätter, F. Aldrian, R. Danzer, P. Supancic, P. Supancic Vol. 6, No. 4, Pages 255-260 DOI: 10.4416/JCST2015-00052 Keywords: Electroceramics, PTC, LTCC, inhomogeneities, microthermography, focused ion beam |
| Thermoplastic Forming as an Alternative Shaping Process for Near-Net-Shape Production of C-SiSiC Ceramics via Liquid Silicon Infiltration (LSI) Process S. Weber, F. Sommer, F. Kern, R. Gadow, H. Voggenreiter, D. Koch Vol. 5, No. 3, Pages 223-236 DOI: 10.4416/JCST2014-00011 Keywords: Extrusion, injection molding, SiC, porosity, feedstock system |
| Three-Dimensional Network ZnO/BaFe12O19 Composite Thick Films and their Microwave Absorption Properties Y. Lin, J. Dong, Y. Liu, N. Han, L. Wang, H. Yang, J. Wang Vol. 9, No. 2, Pages 183-192 DOI: 10.4416/JCST2017-00097 Keywords: Tape casting, impedance matching, microwave absorption |
| Tolerance-Optimized RF Structures in LTCC for mm-Wave Frequencies Applications J. Balcells-Ventura, T. Klein, P. Uhlig, C. Günner, R. Kulke Vol. 6, No. 4, Pages 267-272 DOI: 10.4416/JCST2015-00058 Keywords: LTCC, tolerances, Gysel power splitter |
| Tricalcium Phosphate Nanostructures Loaded with Bisphosphonate as Potential Anticancer Agents M. Rahmanian, S.M. Naghib, A. Seyfoori, A.A. Zare, A.A. Zare, K. Majidzadeh-A, K. Majidzadeh-A, L. Farahmand, L. Farahmand Vol. 8, No. 4, Pages 505-512 DOI: 10.4416/JCST2017-00029 Keywords: MCF-7, G-292, tricalcium phosphate, nanomedicine, inhibitory effect |
| Tunable Temperature Range of Stress-Enhanced Electrocaloric Effects in Composition Gradient Bilayers X. Sun, H. Huang, X. Ma, Y. Wen, Z.-M. Dang Vol. 9, No. 2, Pages 201-208 DOI: 10.4416/JCST2018-00002 Keywords: Keywords: Electrocaloric effect, ferroelectric gradient bilayers, thermodynamic calculation, tunable temperature range. |
| Water Structure Changes within High Solids Loading Calcium Carbonate Slurries Joshua J. Taylor, Yi-Chung Wang, Wolfgang M. Sigmund Vol. 1, No. 1, Pages 7-14 DOI: 10.4416/JCST2010-00003 Keywords: calcium carbonate, slurry, water structure, adsorption, dispersion, sodium polyacrylate, ATR-FTIR, deuterium, oxide, solids, loading, ground |
| Water Uptake of Tape-Cast Cathodes for Lithium Ion Batteries U. Langklotz, M. Schneider, A. Michaelis Vol. 4, No. 2, Pages 69-76 DOI: 10.4416/JCST2012-00036 Keywords: Lithium ion battery, residual water, LFP, NMC, solid electrolyte interface |
| Water-Glass-Based Composite Materials – Investigation into their Thermal Conductivity R.A. Shishkin Vol. 6, No. 3, Pages 231-236 DOI: 10.4416/JCST2014-00050 Keywords: Thermal paste, thermal conductivity, composite material, magnesium oxide, water glass |
| Water-Glass-Based Thermal Paste for High-Temperature Applications R.A. Shishkin, N.A. Erkhova, A.R. Beketov, A.A. Elagin Vol. 5, No. 3, Pages 199-202 DOI: 10.4416/JCST2014-00005 Keywords: Water glass, silicate modulus, magnesium oxide, boron nitride, thermal conductivity, porosity, thermal paste, composite material |
| Why Alkaline Activation – 60 Years of the Theory and Practice of Alkali-Activated Materials P. Krivenko Vol. 8, No. 3, Pages 323-334 DOI: 10.4416/JCST2017-00042 Keywords: Alkaline activation, aluminosilicate, cement, concrete, durability, hydration products, terminology |
| Ytterbia-Neodymia Costabilized Zirconia – Alumina Nanocomposites F. Kern Vol. 3, No. 4, Pages 189-198 DOI: 10.4416/JCST2012_00021 Keywords: Ceramics, mechanical properties, phase composition, microstructure |
| Yttrium Disilicate Micro-Cellular Architecture from Biotemplating of Luffa Cylindrica S.C. Santos, C. Yamagata, A.C. Silva, L.F.G. Setz, S.R.H. Mello-Castanho Vol. 5, No. 3, Pages 203-208 DOI: 10.4416/JCST2014-00008 Keywords: Disilicate, ceramic processing, luminescence, porous ceramic, rheology. |
| Zirconia-Mullite Obtained from Co-Precipitated Zirconia-Mullite Composite Powders by SPS H.Z. Li, Z.J. Li, X.D. Luo, J.Y. Gui, Z.P. Xie Vol. 7, No. 4, Pages 417-422 DOI: 10.4416/JCST2016-00059 Keywords: Zirconia-mullite, co-precipitation, flexural strength, Vickers hardness, microstructure |
| ″Moonie Type″ of Piezoelectric Transformer as a Magnetic Field Detector L. Kozielski, M. Bućko Vol. 8, No. 1, Pages 13-18 DOI: 10.4416/JCST2016-00054 Keywords: Piezoelectric transformer, magnetic field sensor, magnetoelectric effect, measurement techniques |
