Home > Articles

Articles

	2.5Y-TZP from Yttria-Coated Pyrogenic Zirconia Nanopowder Frank Kern Vol.1, No.1, Pages 21-26 DOI: 10.4416/JCST2010-00005 Keywords: zirconia, nanopowder, hot-pressing, powder coating, Y-TZP Abstract \| References \| Full Article
	2.75Yb-TZP Ceramics with High Strength and Aging Resistance F. Kern Vol.2, No.3, Pages 147-154 DOI: 10.4416/JCST2011-00020 Keywords: Zirconia, mechanical properties, microstructure, low-temperature degradation, ytterbia Abstract \| References \| Full Article
	A New Bioactive Glass Composition for Bioceramic Scaffolds Devis Bellucci, Valeria Cannillo, Antonella Sola Vol.1, No.1, Pages 33-40 DOI: 10.4416/JCST2010-00008 Keywords: bioceramics, porous materials, scaffolds, glass-ceramics. Abstract \| References \| Full Article
	Ageing Behavior of Injection-Molded ZTA Ceramics as a Function of Stabilizer Content M. Abou el Ezz, F. Kern, R. Gadow Vol.2, No.4, Pages 191-196 DOI: 10.4416/JCST2011-00025 Keywords: ZTA, ceramic injection molding, ageing behavior, mechanical properties Abstract \| References \| Full Article
	Alumina-Doped 2.5Y-TZP produced from Yttria-Coated pyrogenic Nanopowder F. Kern Vol.2, No.2, Pages 89-96 DOI: 10.4416/JCST2011-00001 Keywords: Zirconia, hot pressing, mechanical properties, microstructure, low-temperature degradation, phase analysis Abstract \| References \| Full Article
	Dense Yttria Film Deposited on a Plasma-Sprayed Al₂O₃ Coating by Aerosol Deposition B.-K. Lee, J.-H. Jung, B.-D. Hahn, W.-H. Yoon, D.-S. Park, J.-J. Choi, J. Ryu, J.-W. Kim, C. Ahn, K.-M. Song Vol.2, No.4, Pages 197-202 DOI: 10.4416/JCST2011-00026 Keywords: Yttria film, alumina, surface roughness, grit blasting, aerosol deposition Abstract \| References \| Full Article
	Development of a Novel Sensor-Actuator-Module with Ceramic Multilayer Technology Markus Flössel, Sylvia Gebhardt, Andreas Schönecker, Alexander Michaelis Vol.1, No.1, Pages 55-58 DOI: 10.4416/JCST2010-00010 Keywords: LTCC, PZT, sensor, actuator, multilayer technology, aluminium die casting Abstract \| References \| Full Article
	Development of Novel ZnO-Doped Hydroxyapatite Polycarboxylate Dental Cement Y. E. Greish, S. H. Kenawy, S. I. Habib, T. A. Moussa, H. A. Shalaby, M. El Deftar Vol.2, No.4, Pages 227-236 DOI: 10.4416/JCST2011-00022 Keywords: Hydroxyapatite, dental cement, polycarboxylate, in vitro performance, stem cells Abstract \| References \| Full Article
	Effect of Alumina/Iron Catalysts on the Formation of Carbon Nanotubes Xiaoxue Zhang, Juha-Pekka Nikkanen, Jyri Rintala, Mika Pettersson, Tomi Kanerva, Jarmo Laakso, Erkki Levänen, Tapio Mäntylä Vol.1, No.1, Pages 51-54 DOI: 10.4416/JCST2010-00013 Keywords: carbon nanotubes, alumina, sol-gel method, chemical catalytic vapour deposition Abstract \| References \| Full Article
	Effect of CdO Addition on Microwave Dielectric Properties of Ba_xSr_1-xTiO₃ Ceramics Doaa A. Abdel Aziz, Wagdy N. Nour, Aisha E. Reda, Eglal R. Souya Vol.1, No.1, Pages 41-50 DOI: 10.4416/JCST2010-00001 Keywords: microwave, dielectric properties, microstructure, SrO, BaO, TiO₂ and CdO Abstract \| References \| Full Article
	Effect of Co Co-Doping on the Electrical Conductivity of Ce_0.9Sm_0.1O_2-δ M.J. Pawar, S.S. Chaure, S.B. Deshmukh Vol.1, No.1, Pages 27-31 DOI: 10.4416/JCST2010-00006 Keywords: SOFC; ceria; EDTA-glycol method; co-dopant; solid electrolytes Abstract \| References \| Full Article
	Effect of Heat Treatment on Grain Growth of Nanocrystalline Hydroxyapatite Powder I. Mobasherpour, E. Salahi Vol.2, No.2, Pages 119-124 DOI: 10.4416/JCST2010-00046 Keywords: Hydroxyapatite, nanostructures, crystal growth, electron microscopy, X-ray diffraction Abstract \| References \| Full Article
	Effect of Mechanical Milling and Sintering Parameters on the Mechanical Properties of SiC-ZrO₂ L. Anggraini, R. Yamamoto, H. Fujiwara, K. Ameyama Vol.2, No.3, Pages 139-146 DOI: 10.4416/JCST2011-00017 Keywords: Mechanical milling, spark plasma sintering, SiC-ZrO₂, microstructure, mechanical properties Abstract \| References \| Full Article
	Electrical and Thermal Properties of Ti₃AlC₂ at High Temperature X.-K. Qian, Y.-B. Li, X.-D. He, Y.-X. Chen, S.-N. Yun Vol.2, No.3, Pages 155-158 DOI: 10.4416/JCST2011-00018 Keywords: Ceramics, thermal conductivity, thermal expansion, electrical properties Abstract \| References \| Full Article
	Failure Resistance Optimisation in Layered Ceramics Designed with Strong Interfaces RaÃºl Bermejo, Robert Danzer Vol.1, No.1, Pages 15-20 DOI: 10.4416/JCST2010-00007 Keywords: Layered ceramics, failure resistance, crack bifurcation, interface delamination. Abstract \| References \| Full Article
	Feasibility Study on Rapid Prototyping of Porcelain Products X. Tian, T. Mühler, C. Gomes, J. Günster, J.G. Heinrich Vol.2, No.4, Pages 217-226 DOI: 10.4416/JCST2011-00038 Keywords: Layer-wise slurry deposition, mechanical properties, porcelain, structural applications, rapid prototyping Abstract \| References \| Full Article
	Free Forming of Porous Ceramic Parts by Rapid Freeze Gelation (RFG) L. Henkel, Chr. Soltmann, L. Vinke, D. Koch, G. Grathwohl Vol.2, No.2, Pages 125-132 DOI: 10.4416/JCST2011-00004 Keywords: Freeze gelation, rapid prototyping, porous ceramic Abstract \| References \| Full Article
	Gas Permeance and Selectivity of Perovskite-Titania Membranes A.L. Ahmad, N.A. Abdullah Sani, S.H.S. Zein Vol.2, No.1, Pages 9-14 DOI: 10.4416/JCST2010-00026 Keywords: Titania membrane, perovskite, calcination temperature, concentration, morphology, phase structure Abstract \| References \| Full Article
	Heat Transfer in Transparent YAG Nanoceramic J. Mucha, A. Chuchmała, D. Hreniak, A. Jeżowski, W. Strek Vol.2, No.3, Pages 179-182 DOI: 10.4416/JCST2011-00014 Keywords: Ceramics, amorphous materials, nanostructures, thermal conductivity, YAG Abstract \| References \| Full Article
	Injection Molding of Alumina-Chromia-Yttria Composites F. Sommer, F. Kern, R. Gadow Vol.2, No.4, Pages 211-216 DOI: 10.4416/JCST2011-00035 Keywords: Alumina, yttria, YAG, composite, injection molding Abstract \| References \| Full Article
	Instrumented Compaction Experiments under Varied Climatic Conditions Ulrich Klemm, Bettina Schöne, Hermann Svoboda, Manfred Fries, Manfred Nebelung Vol.1, No.1, Pages 59-66 DOI: 10.4416/JCST2010-00016 Keywords: Instrumented compaction, friction, silicon nitride, granulate, climatic conditions Abstract \| References \| Full Article
	Laser-Fused Transparent Microspheres with the Eutectic Composition Al₂O₃-Y₂O₃-ZrO₂(AYZ) C. Oelgardt, J. Günster, J. G. Heinrich Vol.2, No.2, Pages 103-110 DOI: 10.4416/JCST2011-00010 Keywords: Eutectic ceramics, Al₂O₃-Y₂O₃-ZrO₂, laser processing, crystallization behavior, microstructure Abstract \| References \| Full Article
	Methods of Quantification of the Internal Structures of Spray Granules S. Höhn, S. Eckhard, M. Fries, B. Matthey, M. Herrmann, A. Michaelis Vol.2, No.2, Pages 75-88 DOI: 10.4416/JCST2011-00003 Keywords: Granule, microstructure quantification, ion beam preparation, porosity, particle distance Abstract \| References \| Full Article
	Microstructure and Mechanical Properties of Hot-Pressed Alumina – 5 vol% Zirconia Nanocomposites F. Kern Vol.2, No.1, Pages 69-74 DOI: 10.4416/JCST2010-00038 Keywords: Nanocomposites, ZTA, sintering, microstructure, zirconia, alumina Abstract \| References \| Full Article
	Nanoscopic Metal Fluorides as Promising Sintering Aids for High-Performance Alumina Ceramics Ch. Stosiek, H. Ludwig, U. Reichel, G. Scholz, E. Kemnitz Vol.2, No.1, Pages 31-38 DOI: 10.4416/JCST2010-00023 Keywords: Transparent, hard alumina ceramic, nano magnesium fluoride, nano aluminium fluoride,mechanical strength, sintering additive Abstract \| References \| Full Article
	New Si/B/N/C Ceramics from a Silaborazine-Type Single-Source Precursor H. Cakmak, M. Jansen Vol.2, No.1, Pages 23-30 DOI: 10.4416/JCST2010-00044 Keywords: Silaborazine, single-source precursor, pre-ceramic polymer, precursor-derived ceramic, Si/B/N/C ceramics Abstract \| References \| Full Article
	Photoactive TiO₂ Nanopowder Synthesized at Low Temperature without a Catalyst J.-P. Nikkanen, E. Huttunen-Saarivirta, T. Kanerva, T. Kivelä, E. Levänen, T. Mäntylä Vol.2, No.2, Pages 97-102 DOI: 10.4416/JCST2011-00008 Keywords: Sol-gel processes, titanium dioxide, anatase, grain growth, calcination Abstract \| References \| Full Article
	Porous Si-SiC Ceramics Derived by Oxidation from C/C-Si-SiC Composites V.K. Srivastava, W. Krenkel, V.J.A. D'Souza, H.W. Mucha Vol.2, No.2, Pages 111-118 DOI: 10.4416/JCST2011-00007 Keywords: C/C-SiC composite, Si-SiC porous ceramic, oxidation, open porosity Abstract \| References \| Full Article
	Porous TiO₂-Y₂O₃ Ceramics with Specific Infrared-Optical Properties G. Steinborn, G. Tzschichholz, J. Guenster, M.H. Keller, J. Manara Vol.2, No.3, Pages 183-190 DOI: 10.4416/JCST2011-00011 Keywords: Oxide ceramic, porosity, mean pore diameter, infrared optical properties, emissivity Abstract \| References \| Full Article
	Properties of Injection Moulded Alumina-Toughened Zirconia F. Kern, R. Gadow Vol.2, No.1, Pages 47-54 DOI: 10.4416/JCST2010-00019 Keywords: ATZ, CIM, platelets, Weibull statistics, toughening Abstract \| References \| Full Article
	Residual Stress Strengthening in Layered Tricalcium Phosphate (TCP) Bioceramics E. Hahn, T. Fey, K. Zuo, D.-L. Jiang, P. Greil Vol.2, No.2, Pages 133-138 DOI: 10.4416/JCST2011-00005 Keywords: Calcium phosphate bioceramics, tape-cast laminates, residual stress strengthening Abstract \| References \| Full Article
	SiC/BN Composites by Spark Plasma Sintering (SPS) of Precursor-Derived SiBNC Powders J. Wilfert, K. Meier, K. Hahn, Y. Grin, M. Jansen Vol.1, No.1, Pages 1-6 DOI: 10.4416/JCST2010-00012 Keywords: Precursor-derived ceramics, composites, microstructure analysis, SiC, Spark plasma sintering Abstract \| References \| Full Article
	Sintering and Mechanical Properties of AlMgB₁₄ Composite Materials M. Herrmann, R. Bodkin, N. J. Coville, I. Sigalas, M. Thiele Vol.2, No.1, Pages 55-60 DOI: 10.4416/JCST2010-00020 Keywords: Boride, sintering, microstructure, AlMgB₁₄ Abstract \| References \| Full Article
	Sintering Behaviour of Multilayer Hydroxyapatite Laminates E. Hahn, J. Hum, J. Will, K. Zuo, D. Jiang, P. Greil Vol.2, No.1, Pages 61-68 DOI: 10.4416/JCST2010-00034 Keywords: Hydroxyapatite, laminate sintering, aggregated and dispersed powder Abstract \| References \| Full Article
	Statistical Optimization of the Binder Mixing Ratio for Fabricating Reliable Ceramic Raschig Rings A. Salem, Y. Beygi Khosrowshahi, S. Aghahosseini Vol.2, No.3, Pages 159-168 DOI: 10.4416/JCST2011-00013 Keywords: Raschig ring, extrusion, compressive strength, reliability. Abstract \| References \| Full Article
	Synthesis and Characterization of Mesoporous Sodium Dodecyl Sulfate-Coated Magnetite Nanoparticles R. El-kharrag, A. Amin, Y. E. Greish Vol.2, No.4, Pages 203-210 DOI: 10.4416/JCST2011-00021 Keywords: Magnetite nanoparticles, mesoporous, sodium dodecyl sulfate, thermal analysis, magnetic susceptibility Abstract \| References \| Full Article
	Synthesis Conditions of Cobalt Aluminate Nano-Sized Powder Sh. Salem, S.H. Jazayeri, F. Bondioli, A. Allahverdi, M. Shirvani Vol.2, No.3, Pages 169-178 DOI: 10.4416/JCST2011-00015 Keywords: Cobalt aluminate, glaze; melting, hot stage microscopy, viscosity Abstract \| References \| Full Article
	Synthesis of PLLA-HA Hybrid Composites with Bone-Like Structure J. Zhang, D. Jiang, Z. Chen, Q. Lin, Z. Huang Vol.2, No.1, Pages 39-46 DOI: 10.4416/JCST2010-00030 Keywords: PLLA, HA, hybrid composites Abstract \| References \| Full Article
	Technology for the Obtainment of Transparent MgAl₂O₄ Spinel Parts A. Goldstein, A. Goldenberg, M. Vulfson Vol.2, No.1, Pages 1-8 DOI: 10.4416/JCST2010-00018 Keywords: Spinel, transparent, ceramic, sintering, armor Abstract \| References \| Full Article
	Thermal Evolution of Calcium Aluminate Gel S. Kurajica, V. Mandic, J. Sipusic Vol.2, No.1, Pages 15-22 DOI: 10.4416/JCST2010-00017 Keywords: Calcium aluminate, sol-gel, thermal evolution, crystallization, non-isothermal kinetics. Abstract \| References \| Full Article
	Water Structure Changes within High Solids Loading Calcium Carbonate Slurries Joshua J. Taylor, Yi-Chung Wang, Wolfgang M. Sigmund Vol.1, No.1, Pages 7-14 DOI: 10.4416/JCST2010-00003 Keywords: calcium carbonate, slurry, water structure, adsorption, dispersion, sodium polyacrylate, ATR-FTIR, deuterium, oxide, solids, loading, ground Abstract \| References \| Full Article

Printed version

titel_2011-01_180px

Order journal subscription