Articles
All articles | Recent articles
Evaluating Porosity in Cordierite Diesel Particulate Filter Materials, Part 2 Statistical Analysis of Computed Tomography Data
Y. Onel, A. Lange, A. Staude, K. Ehrig, A. Kupsch, M.P. Hentschel, T. Wolk, B.R. Müller, G. Bruno
BAM Federal Institute for Materials Research and Testing, D-12200 Berlin, Germany
received August 23, 2013, received in revised form October 18, 2013, accepted November 18, 2013
Vol. 5, No. 1, Pages 13-22 DOI: 10.4416/JCST2013-00022
Abstract
Complementary to Part 1 of this work, the bi-continuous microstructure of porous synthetic cordierite ceramics for filtration applications was investigated using 3D x-ray computed tomography at different resolutions. Applying both Fast Fourier Transform and a newly developed image analysis algorithm, we quantitatively evaluated porosity and pore orientation. The statistical approach allows extraction of spatially resolved or average values. Porosity values based on x-ray absorption agree with mercury intrusion measurements, while pore orientation factors agree with x-ray refraction data (Part 1 of this work), and with published crystallographic texture data.
Download Full Article (PDF)
Keywords
Pore orientation, porous ceramics, computed tomography, 3D microstructure
References
1 Readey, M.J., Rontanini, L.D.: Cordierite material useful in a heat source retainer and process for making the same. US Patent 4973566, (1990).
2 Saito, N., Nishimura, S.-Y., Kawano, M., Araki, S.-I., Sukenaga, S., Nakashima, K., Yasukouchi, T.: Fabrication of nitrogen-containing cordierite ceramics, J. Am. Ceram. Soc., 93, 2257 – 2263, (2010).
3 Merkel, G., Beall, D., Hickman, D., Vernacotola, M.: Effects of microstructure and cell geometry on performance of cordierite diesel particulate filters, SAE Technical Paper 2001 – 01 – 0193, 2001, doi:10.4271/2001 – 01 – 0193.
4 Shyam, A., Lara-Curzio, E., Pandey, A., Watkins, T.R., More, K.L.: The thermal expansion, elastic and fracture properties of porous cordierite at elevated temperatures, J. Am. Ceram. Soc., 95, 1682 – 1691, (2012).
5 Bruno, G., Efremov, A.M., An, C.P., Wheaton, B.R., Hughes, D.J: Connecting the macro and microscopic strain response in porous ceramics, Part II - Microcracking, J. Mater. Sci., 47, 3674 – 3689, (2012).
6 Gordon, T., Shyam, A., Lara-Curzio, E.: The relationship between microstructure and fracture toughness for fibrous materials of diesel particulate filters, J. Am. Ceram. Soc., 93, 1120 – 1126, (2010).
7 Bubeck, C.: Direction dependent mechanical properties of extruded cordierite honeycombs, J. Eur. Ceram. Soc., 29, 3113 – 3119, (2009).
8 Kupsch, A., Lange, A., Hentschel, M.P., Onel, Y., Wolk, T., Staude, A., Ehrig, K., Müller, B.R., Bruno, G.: Evaluating porosity in cordierite-based diesel particulate filter materials. Part 1 X-Ray Refraction. submitted to J. Ceram. Sci. Techn. (2013).
9 Bruno, G., Vogel, S.: Calculation of the average coefficient of thermal expansion in oriented cordierite polycrystals, J. Am. Ceram. Soc., 91, 2646 – 2652, (2008).
10 Kingery, W.D.: Factor affecting thermal stress resistance of ceramic materials, J. Am. Ceram. Soc., 38, 3 – 15, (1955).
11 Lachman, I.M., Bagley, R.D. and Lewis, R.M.: Thermal expansion of extruded cordierite ceramics, J. Am. Ceram. Soc., 60, 202 – 205, (1981).
12 Bruno, G., Kachanov, M.: On modeling of microstresses and microcracking generated by cooling of polycrystalline porous ceramics, J. Eur. Ceram. Soc., 33, 1995 – 2005, (2013).
13 Bruno, G., Kilali, Y., Efremov, A.M.: Impact of the non-linear character of the compressive stress-strain curves on thermal and mechanical properties of porous microcracked ceramics, J. Eur. Ceram. Soc., 33, 211 – 219, (2013).
14 Bruno, G., Kachanov, M.: Porous microcracked ceramics under compression: micromechanical model of non-linear behavior, J. Eur. Ceram. Soc., 33, 2073 – 2085, (2013).
15 Bruno, G., Efremov, A.M., Wheaton, B.R., Bobrikov, I., Simkin, V.G., Misture, S.:. Micro- and macroscopic thermal expansion of stabilized aluminum titanate, J. Eur. Ceram. Soc., 30, 2555 – 2562, (2010).
16 Bruno, G., Efremov, A.M., Webb, J.E.: The correlation between the coefficient of thermal expansion and the lattice mechanical properties of aluminum titanate, Acta Mater., 58, 6649 – 6655, (2010).
17 Bruno, G., Garlea, V.O., Muth, J., Efremov, A.M., Watkins, T.J., Shyam, A.: Temperature dependent microstress evolution in microcracked β-eucryptite, Acta Mater., 60, 4982 – 4996, (2012).
18 Cleveland, J.J., Bradt, R.C.: Grain size/microcracking relations for pseudobrookite oxides, J. Am. Ceram. Soc., 61, 478 – 481, (1978).
19 Ohya, Y., Nakagawa, Z.: Measurement of crack volume due to thermal expansion anisotropy of aluminum titanate ceramics, J. Mater. Sci., 31, 1555 – 1559, (1996).
20 Ohya, Y., Takahashi, Y., Nakagawa, Z.: Thermal expansion of grain boundary cracked aluminum titanate, J. Mater. Sci., 31, 1361 – 1365, (1996).
21 Gibson, L.J., Ashby, M.F.: The mechanics of three-dimensional cellular materials, P. Roy. Soc. Lond. A Mat., 382, 43 – 59, (1982).
22 Bruno, G., Efremov, A.M., Levandovsky, A.N., Clausen, B.: Connecting the macro and microscopic strain response in porous ceramics: modeling and experimental validation, J. Mater. Sci., 46, 161 – 173, (2011).
23 Lucas, R.: On the time-law of the capillary rise of liquids, (in German), Kolloid Z., 23, 15 – 22, (1918).
24 Washburn, E.W.: The dynamics of capillary flow, Phys. Rev., 17, 273 – 283, (1921).
25 Andersson, L., Larsson, P.T., WÃ¥gberg, L., Bergström, L.: Evaluating pore space in macroporous ceramics with water-based porosimetry, J. Am. Ceram. Soc., 96, 1916 – 1922, (2013).
26 Suzuki, Y., Kondo, N., Ohji, T., Morgan, P.E.D.: Uniformly porous composites with 3-D network structure (UPC-3D) for high-temperature filter applications, Int. J. Appl. Ceram. Tech., 1, 76 – 85 (2004).
27 Park, J.K., Lee, J.S., Lee, S.I.: Preparation of porous cordierite using gelcasting method and its feasibility as a filter, J. Porous Mat., 9, 203 – 210, (2002).
28 Sandoval, M.L., Camerucci, M.A., Tomba-Martinez, A.G.: High temperature mechanical behavior of cordierite-based porous ceramics prepared by modified cassava starch thermogelation, J. Mater. Sci., 47, 8013 – 8021, (2012).
29 Živcová-Vlčková, Z., Locs, J., Keuper, M., Sledlářová, I., Chmelíčková, M.: Microstructural comparison of porous oxide ceramics from the system, Al2O3-ZrO2 prepared with starch as a pore-forming agent, J. Eur. Ceram. Soc., 32, 2163 – 2172, (2012).
30 Kardjilov, N., Manke, I., Hilger, A., Strobl, M., Banhart, J.: Neutron imaging in materials science, Materials Today, 14, 248 – 256, (2011).
31 Manke, I., Strobl, M., Kardjilov, N., Hilger, A., Treimer, W., Dawson, M., Banhart, J.: Investigation of soot sediments in particulate filters and engine components. Nucl. Instrum. Meth. A, 610, 622 – 626, (2009).
32 Strobl, M., Treimer, W., Ritzoulis, C., Wagh, A.G., Abbas, S., Manke, I.: The new V12 ultra-small-angle neutron scattering and tomography instrument at the Hahn-Meitner-Institut, J. Appl. Crystallogr., 40, 463, (2007).
33 Williams, S.H., Hilger, A., Kardjilov, N., Manke, I., Strobl, M., Douissard, P.A., Martin, T., Riesemeier, H., Banhart, J.: Detection equipment for micro imaging with neutrons, J. Instrumentation, 7, 1 – 25, (2012).
34 Voigt, C., Jäckel, E., Aneziris, C.G., Hubálková, J.: Investigations of reticulate porous alumina foam ceramics based on different coating techniques with aid of μCT and statistical characteristics, Ceram. Int., 39, 2415 – 2422, (2013).
35 Grothausmann, R., Zehl, G., Manke, I., Fiechter, S., Bogdanoff, P., Dorbandt, I., Kupsch, A., Lange, A., Hentschel, M., Schumacher, G., Banhart, J.: Quantitative structural assessment of heterogeneous catalysts by electron tomography, J. Am. Chem. Soc., 133, 18161 – 18171, (2011).
36 Roberts, A.P., Garboczi, E.J.: Elastic properties of model porous ceramics, J. Am. Ceram. Soc., 83, 3041 – 3048, (2000).
37 Zhao, F., Landis, H.R., Skerlos, S.J.: Modeling of porous filter permeability via image-based stochastic reconstruction of spatial porosity correlations, Environ. Sci. Tech., 39, 239 – 247, (2006).
38 Gulati, S.: Thermal stresses in ceramic wall-flow diesel filters. SAE Technical paper, 830079, (1983).
39 Bruno, G., Pozdnyakova, I., Efremov, A.M., Levandovskyi, A.N., Clausen, B., Hughes, D.J.: Thermal and mechanical response of industrial porous ceramics, Mater. Sci. Forum, 652, 191 – 196, (2010).
40 Stafford, R.J., Golovin, K.B., Dickinson, A., Watkins, T.R., Shyam, A., Lara-Curzio, E.: Comparison of elastic moduli of porous cordierite by flexure and dynamic test methods. In: Advances in bioceramics and porous ceramics V, ed. by Roger Narayan, Paolo Colombo, Michael Halbig, Sanjay Mathur. DOI: 10.1002/9781118217504.ch22.
41 Bruno, G., Efremov, A.M., Clausen, B., Balagurov, A.M., Simkin, V.N., Wheaton, B.R., Webb, J.E., Brown, D.W.: On the stress-free lattice expansion of porous cordierite. Acta Mater., 58, 1994 – 2003, (2010).
42 Bruno, G., Efremov, A.M., An, C.P., Nickerson, S.T.: Not all microcracks are born equal: thermal vs. mechanical microcracking in porous ceramics, In Widjaja S, Singh D (Eds), Advances in bioceramics and porous ceramics IV – Ceramic Engineering & Science Proc., 32:137 – 152, (2011).
43 Görner, W., Hentschel, M.P., Müller, B.R., Riesemeier, H., Krumrey, H., Ulm, G. Diete, W., Klein, U., Frahm, R.: BAMline: The first hard x-ray beamline at BESSY II, Nucl. Instrum. Meth. A, 467 – 468, 703 – 706, (2001).
44 Rack, A., Zabler, S., Müller, B.R., Riesemeier, H., Weidemann, G., Lange, A., Goebbels, J., Hentschel, M.P., Görner, W.: High resolution synchrotron-based radiography and tomography using hard x-rays at the BAMline (BESSY II), Nucl. Instrum. Meth. A, 586, 327 – 344, (2008).
45 Lange, A., Hentschel, M.P., Kupsch, A., Müller, B.R.: Numerical correction of x-ray detector backlighting, Int. J. Mat. Res., 103, 174 – 178, (2012).
46 Kupsch, A., Hentschel, M.P., Lange, A., Müller, B.R.: How to correct x-ray detector backlighting, (in German), MP Mater. Test., 55, 577 – 581, (2013).
47 Weitkamp, T., Haas, D., Wegrzynek, D., Rack, A.: ANKAphase: Software for single-distance phase-retrieval from inline x-ray phase-contrast radiographs, J. Synchrotron Rad., 18, 617 – 629, (2011).
48 Schuster, A.: On the investigation of hidden periodicities with application to a supposed 26 day period of meteorological phenomena, Terr. Magn., 3, 13 – 41, (1898).
49 Feldkamp, L.A., Davis, L.C., Kress, J.W.: Practical cone-beam algorithm, J. Opt. Soc. Am. A, 1, 612 – 619, (1984).
Copyright
Göller Verlag GmbH